15,4 3 -0,1 Date Code 13,45 -0,1 Ident-Nr. XXXXXXX ERNI 223212 0,5 EE-Zone fur durchkontaktierte Alignment strip 2 Locher o0.60.05 compliant zone for thru hole o0.60.05 Ausrichtstreifen 2 2 10 x 2 = 20 8 25 10 x 2 = 15 4x2= 20 11 1 11.2 Level 3 Ebene z Ebene - a 9.7 Level 2 b 8.2 Ebene - Level 1 c d +0.2 +0.2 +0.2 4.5 0.3 e f 3.7 0.3 1 max 1 max 8 A P2 50 max B C D E P1 F G U1 Bestuckungsplan - H J contact layout Bezugsebene Tiefe 13 0.3 25 24 23 22 21 20 19 18 17 16 15 11 10 9 8 7 6 5 4 K K K K K K K K K K K K K K K K K K K K K K K K K 3 2 1 K K K K K K K K K K Datum plane depth K z K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K R3 a L M b N c R2 d P Q e R f R1 S T 13 0.2 Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 10 x 2 = ( 20 ) 0.1 6.8 16 0.2 8.3 0.1 0.1 o 0,6 0,05 Durchmesser des metallisierten Loches o 0,6 0,05 Diameter of finished plated-through hole 2 1) 25 14.5 0.2 10 x 2 = ( 20 ) 8 1) alle Locher all holes 5.3 0.1 o 0,7 0,02 Bohrungsdurchmesser des Loches 15 o 0,7 0,02 Diameter of drilled hole 1 11 z a b Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 Metal plating of plated-through hole see drawing 114406 c d Fehlende Mae und Angaben nach IEC 61076-4-101 f Missing information and dimensions per IEC 61076-4-101 2 Information: R3 Level 1 siehe Bestuckungsplan/ Anforderungsstufe 2 / ohne Fixierstift/ Consider protection memo from DIN 34 4 x 2 = (8) e see contact layout Tolerances class 2 All Dimensions in mm without locating peg All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste A ERmet Male Wide Type A www.ERNI.com Index 2:1 Scale H:00040339.SZA 223212 ERMA I