CPH3114 - Sanyo Semiconductor - Datasheet.Directory

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

PNP/NPN Epitaxial Planar Silicon Transistors

DC/DC Converter Applications

Ordering number:ENN6394

CPH3114/CPH3214

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

70500TS (KOTO) TA-2786 No.6394–1/5

0.05

0.9

0.7 0.2 1.6 0.60.6

1.9

2.8

0.2

2.9

0.15

0.4

Package Dimensions

unit:mm

2150A

[CPH3114/CPH3214]

Applications

· Relay drivers, lamp drivers, motor drivers.

Features

· Adoption of MBIT processes.

· Large current capacitance.

· Low collector-to-emitter saturation voltage.

· High-speed switching.

· Ultrasmall package facilitates miniaturization in end

products (mounting height : 0.9mm).

· High allowa ble power dissipation.

˚C

Electrical Characteristics at Ta = 25˚C

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

Mounted on a ceramic board (600mm2×0.8mm)

Marking : CPH3114 : AP, CPH3214 : CP Continued on next page.

Specifications

( ) : CPH3114

Absolute Maximum Ratings at Ta = 25˚C

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 51)–(V

egatloVrettimE-ot-rotcelloCV

OEC 51)–(V

egatloVesaB-ot-rettimEV

OBE 5)–(V

tnerruCrotcelloCI

C5.1)–(A

)esluP(tnerruCrotcelloCI

PC 3)–(A

tnerruCesaBI

B003)–(Am

noitapissiDrotcelloCP

C9.0W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V21)–(= E0=1.0)–(Aµ

tnerruCffotuCrettimEI

OBE VBE I,V4)–(= C0=1.0)–(Aµ

niaGtnerruCCD hEF VEC I,V2)–(= CAm001)–(= 002065

tcudorPhtdiwdnaB-niaGf

TVEC I,V2)–(= CAm003)–(= )053(zHM

054zHM

ecnaticapaCtuptuOboCV

BC zHM1=f,V01)–(= 9)71(Fp

CPH3114/CPH3214

No.6394–2/5

Continued from preceding page.

Switching Time Test Circuit

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnoitarutaSrettimE-ot-rotcelloCV

)tas(EC

ICI,Am057)–(= BAm51)–(= )021–()081–(Vm

031002Vm

ICI,Am5.1)–(= BAm03)–(= )012–()023–(Vm

042063Vm

egatloVnoitarutaSrettimE-ot-esaBV

)tas(EB ICI,Am057)–(= BAm51)–(=58.0)–(2.1)–(V

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Aµ01)–(= E0=51)–(V

egatloVnwodkaerBrettimE-ot-rotcelloCV

OEC)RB( ICR,Am1)–(= EB =∞51)–(V

egatloVnwodkaerBesaB-ot-rettimEV

OBE)RB( IEI,Aµ01)–(= C0=5)–(V

emiTNO-nruTt

no .tiucrictsetdeificepseeS 04)05(sn

emiTegarotSt

gts .tiucrictsetdeificepseeS )09(sn

081sn

emiTllaFt

f.tiucrictsetdeificepseeS 02)51(sn

50Ω

INPUT OUTPUT

VRRBRL

VCC=5V

220µF 470µF

VBE=–5V

PW=20µsIB1

IB2

DC≤1%

20IB1= –20IB2= IC=750mA

(For PNP, the polarity is reversed.)

--0.2

--0.4

--0.6

--0.8

--1.0

--1.2

--1.4

--1.6

--1.8

--2.0

--1.0

--0.5

--0.9

--0.8

--0.7

--0.6

--0.4

--0.3

--0.2

--0.1

1.0

0.5

0.9

0.8

0.7

0.6

0.4

0.3

0.2

0.1

IC -- VCE

0 --0.2--0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0.20.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

2.0

1.0

IC -- VCE

IB=0

IC -- VBE

0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2

CPH3114

VCE= --2V

--25°C

25°C

Ta=75°C

1.8

1.6

1.4

1.2

0.8

0.6

0.4

0.2

IC -- VBE

0 0.2 0.4 0.6 0.8 1.21.0

--25°C

CPH3214

VCE=2V

Ta=75°C

25°C

IT01691

IT01693

IT01692

IT01694

CPH3114

--50mA

--30mA

--10mA

--40mA

--20mA

--2mA

--4mA

--6mA

--8mA

IB=0

CPH3214

50mA

40mA

30mA

20mA

10mA

8mA

6mA

4mA

2mA

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Current, IC–A

Base-to-Emitter Voltage, VBE –V

Collector Current, IC–A

Base-to-Emitter Voltage, VBE –V

CPH3114/CPH3214

No.6394–3/5

23 57

0.01 1.00.1 23 57 23

1000

100

1.0

100

23 57 23 257

0.01 1.00.1 3

1000

100

hFE -- IC

1000

10 23 57

--0.01 --1.0--0.1 23 57 23

100

CPH3114

VCE= --2V

--25°C

Ta=75°C

fT -- IC

23 57 23 257

--0.01 --1.0--0.1 3

1000

100

hFE -- IC

1000

10 23 57

0.01 1.0

0.1 23 57 23

100

CPH3214

VCE=2V

--25°C

25°C

Ta=75°C

fT -- IC

CPH3114

VCE= --2V CPH3214

VCE=2V

IT01695

IT01697

IT01696

IT01698

Cob -- VCB

23 57

--1.0 --10 23 23 57

1.0 10 23

1.0

100

Cob -- VCB

CPH3214

f=1MHz

VCE(sat) -- IC

23 57

--0.01 --1.0--0.1 23 57 23

--1000

--100

--10

CPH3114

IC / IB=20

--25°C

25°C

Ta=75°C

IT01699

IT01701

IT01700

IT01702

CPH3114

f=1MHz

CPH3214

IC / IB=20

--25°C

Ta=75°C

25°C

DC Current Gain, hFE

Collector Current, IC–A

DC Current Gain, hFE

Collector Current, IC–A

Collector Current, IC–A Collector Current, IC–A

Gain-Bandwidth Product, fT– MHz

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB –V

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB –V

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector Current, IC–A

CPH3114/CPH3214

No.6394–4/5

23 57

--0.01 --1.0--0.1 23 57 23

--1000

--100

--10

523 57

0.01 1.00.1 23 57 23

1000

100

VCE(sat) -- IC

CPH3214

IC / IB=50

75°C

Ta= --25°C

VBE(sat) -- IC

0.1 23 57

0.01 1.00.1 23 57 23

1.0

CPH3214

IC / IB=50

Ta= --25°C

25°C

75°C

VCE(sat) -- IC

CPH3114

IC / IB=50

75°C

25°C

Ta= --25°C

VBE(sat) -- IC

--10

--0.1 23 57

--0.01 --1.0--0.1 23 57 23

23 57

0.1 101.0 23 57 23

--1.0

CPH3114

IC / IB=50

Ta= --25°C

75°C

IT01703

IT01705

IT01704

IT01706

25°C

PC -- Ta

1.4

0.2

0.4

0.6

0.8

0.9

1.0

1.2

0 20 40 60 80 100 120 140 160

A S O

1.0

0.1

0.01

DC operation

100ms

10ms

500µs

100µs

ICP=3A

IC=1.5A

IT01707 IT01708

1ms

CPH3114/CPH3214 CPH3114/CPH3214

25°C

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector-to-Emitter

Saturation Voltage, VCE(sat) – mV

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) – V

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) – V

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Dissipation, PC–W

Ambient Temperature, Ta – °C

Ta=25°C

Single pulse

Mounted on a ceramic board(600mm

×0.8mm)

For PNP, minus sign is omitted.

Mounted on a ceramic board (600mm

×0.8mm)

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of July, 2000. Specifications and information herein are subject to

change without notice.

CPH3114/CPH3214

PS No.6394–5/5