REVISION AM | + Le # DIMENSIONS N/A FOR - 0 =N OPTION ME 950 [1.27] C.L. [Pao Ne ONE PLACE DEGMALS: 2.1 [3] THREE PLACE DecMALa@ + .005 [.13] TWO PLACE DECMALS + .01 [.3] FOUR PLACE DECMIAL + .0020 [.051] SOCKET STRIP SINGE ROW ASSENELY | SORE SB SHEET 1 oF 3 ANGLES 22 [2.03 : 095" side | | { fe) (DURE RRaRoeEe) eA | -ostn # J [3.94] [1.27] [.38] "A" U| | "A" 1 MAX SWAY No. OF POS X _.050 No. OF POS. x .050 + .155 (REF) 1.27 l< No. OF POS. x .050 + .015 (REF) 4 _ .050 [1.27] REF. 5 1 | SFMXXSXXX 180 [4.57] (REF) ~| -B REF .050 [1.27] [1.27] FIG 1 THROUGH HOLE/STRAIGHT MODIFIED C5ACP .005 [.13] (REF) 2" MAX SWAY SECT. "A""A (SEE FIG. 1) (SEE FIG, 2) (SEE FIG. 1) (SEE FIG. 1) * -L2: SURFACE MOUNT (LOW INSERTION - 10 [2.79] 015 [.38] Gar CONTACT NG Broz ma STR EESTIN-ON TAL CONTACT AREA, (REF) (REF) (SEE Fic. 2) Fi BUC SELEPINE 10 IN CONTACT AREA | { j ~U TEAS NTAGE Cnstcos aa ~t: 1Opt SELECTIVE GOLD IN CONTACT AREA vy (SEE Fic. 1) SM: 30,1 SELECTIVE GOLD IN CONTACT AREA, Th: THROUGH HOLE (PHOS BRONZE) : C2=B I= DOW (see pee?) USE_ CONTACT: (C-11801X0) ts ROSSI OAL w contact AREA CXX-01-XX (SEE FIG. 1) MATTE TIN ON TAIL T2: SURFACE MOUNT (PHOS BRONZE) LW: JOU SELECTIVE GOLD IN CONTACT AREA, (SEE FIG. 1) DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 POSITION 1 al POINT IN DIRECTION OF ARROW (TOL ACCUM +.005 OVER 50 POS.) ~No. OF POS. X .050 .050 [1.27] [1.27] i Tid TEL U 0 \ e092 xK No. OF POS. x .050 + .155 (REF) [1.27] [3.94] q "B. ee ee * Ib iO LY Lh J = _ No. OF POS . X .050 .050 [1.27] [1.27] (TOL ACCUM +.005 [.13] OVER 50 POS.) FIG 2 02: SURFACE MOUNT rast C3=BI=DO | U LL. max sway) [C4BCP SFMXXSXXX [4.7048] 125 [3.18] REF (TYP) SECT. "BB MATERIAL: INSULATOR: LCP, UL 94 VO CONTACT: BeCu SFM1XXXXXX-SXX NO. OF POSITIONS ALL POSITIONS AVAILABLE =2 THRU 50 USE BODY: (SFMXXSXX-X) LEAD STYLE O1: THROUGH HOLE USE CONTACT: (C4401XX) 02: SURFACE MOUNT USE CONTACT: (C4402Xx) 03:; STRAIGHT MODIFED USE CONTACT: (C44-03XX) Li: THROUGH HOLE (LOW INSERTION) USE CONTACT: (C61-01Xxx) USE_CONTACT: (C118-02XXX) 2% = NOT TOOLED C1E-OG > 2. COPLANARITY TO BE WITHIN .004 [.10]. OPTIONS (LEAVE BLANK FOR STANDARD AND USE SFMXX-SLC-X) <N: NO POLARIZATION NOTCH (USE SFMXXSXX-N) A: ALIGNMENT PIN (USE SFM-XX-S-A-x) (SEE FIGURE 3) LC: LOCKING CUP SSE FIGURE 5) (SEE NOTE 5) SE (2) LCO31M & SFMXXS-LC -P: PICK PLACE PAD (SEE FIGURE 4) USE PPP-14 K: POLYAMIDE FILM (SEE FIG. 6, SHT. 2) TR: TAPE AND REEL (X2 LEAD STYLE ONLY) RON ET ne. 7) BODY SPECIFICATION S: SINGLE ROW LM: SELECTIVE LIGHT GOLD SPECIFY L IN PLATING SUFFIX X/ MATTE TIN TAILS (USE CXXXX-L) TABLE 1 TAIL LENGTH A'|TAIL WIDTH B| 120 [3.05] | .020 [.51] .075 [1.91] | .016 [.41] SUFFIX 01,-L1 -03,-L3 NOTES: 1. MIN. PUSHOUT FORCE: .5 Ib. 3.()REPRESENTS CRITICAL DIMENSION FOR STATISTICAL PROCESS CONTROL. 4. TUBE ALL POSITIONS. 5. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. SFM1XXXXXX-SXX Samlec 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O, BOX 1147 CODE 55322 SFM1XX-XX-XX-S-XX SHEET 1 oF 3 MADE EY! REIDINGER 9-8-92 CHECKED BY: CCARTIN APPROVAL, DEM