ASTMUPLD
APPLICATIONS:
FEATURES:
High Performance, Programmable LVDS SMD MEMS Oscillator
STANDARD SPECIFICATIONS:
Moisture Sensitivity Level (MSL) – 1
Pb
RoHS/RoHS II compliant
ESD Sensitive
• Industry Standard package sizes: 3.2 x 2.5 x 0.75mm,
5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 625MHz
• Supply Voltage options: 3.3V, 2.8V, 2.25V~3.63V
• Ultra-low RMS phase jitter: 0.6ps typ.
(@156.25MHz, integration bandwidth: 12kHz to 20MHz)
• Frequency Stability options: ±10ppm, ±20ppm, ±25ppm,
±50ppm over -20 to +70°C and -40 to +85°C
• 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express
• Storage
• Servers
• Networking
• Telecom
• Instrumentation
• Harsh environment (vibration, shock-prone and humid)
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Note: 1. Frequencies not supported:
Range 1: From 209.000001MHz to 210.999999MHz
Range 2: From 251.000001MHz to 263.999999MHz
Range 3: From 314.000001MHz to 422.999999MHz
Range 4: From 502.000001MHz to 527.999999MHz
Parameters
Min Typ Max Unit Notes
Output Frequency Range (F) 1 625 MHz
See Note 1 for Frequencies not
supported
Frequency Stability (F
stab
)
-10 +10
ppm
Inclusive of initial tolerance at 25°C,
and variations over operating
temperature, rated power supply
voltage and load
-20 +20
-25 +25
-50 +50
Operating Temperature Range (T
use
) -20 +70 °C
Option “E”
-40 +85
Option “L”
Aging@25°C 1
st
year -2 +2 ppm
10 years -5 +5
Supply Voltage (V
dd
) V
2.25 2.5 2.75
Option “25”
2.97 3.3 3.63
Option “33”
2.25 - 3.63
Option “Blank” (default)
Input High Voltage(V
IH
) 70%*V
dd
V
Pin 1
Input Low Voltage(V
IL
) 30%*V
dd
V
Pin 1
Input Pull-up Impedance ( Z
in
) 100 250 kΩ
Pin 1, OE logic high or logic low,
ST logic high
2 MΩ
Pin 1, ST logic low
Startup Time (T
start
) 6 10 ms
Measured from the time V
dd
reaches its
rated minimum value
Resume Time ( T
resume
) 6 10 ms
In standby mode. Measured from the
time ST pin crosses 50% threshold
% 55 54 elcyC ytuD
SDVL epyT tuptuO
Current Consumption ( I
dd
) 47 55 mA
Excluding load termination current,
V
dd
=2.5V or 3.3V
OE Disable Current (I
OD
) 35 mA
OE=Low
Output Disable Leakage Current
( I
leak
) 1 µA
OE=Low
Standby Current (I
std
) 100 µA
ST =Low, for all V
dd
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
Pb
RoHS/RoHS II compliant
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
(Continued)
Standard Frequencies
Standard Frequency (MHz)
25.000000 50.000000 74.175824 74.250000 75.000000 98.304000 100.000000 106.250000
125.000000 133.000000 133.300000 133.330000133.333000133.333300133.333330 133.333333
148.351648 148.500000 150.000000 155.520000156.250000161.132800166.000000 166.600000
166.660000 166.666000 166.666600 166.666660166.666666200.000000212.500000
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Thermal Consideration
Parameters Min Typ Max Unit Notes
Differential Output Voltage (V
OD
) 250 350 450 mV
V
OD
Magnitude Change ( ∆V
OD
) 50 mV
Offset Voltage ( V
OS
) 1.125 1.2 1.375 V
V
OS
Magnitude Change ( ∆V
OS
) 50 mV
Rise/Fall Time ( T
r
/T
f
) 495 700 ps 20%-80%, Freq. = 1MHz~220MHz
495 600 20%-80%, Freq. = 220MHz~625MHz
OE Enable/Disable Time (T
oe
) 115 ns F=212.5MHz, 220MHz. For other
frequencies, T
oe
=100ns+3*cycles
RMS Period Jitter ( T
jitt
)
1.2 1.7
ps
F=100MHz, 156.25MHz, 212.5MHz,
622.08MHz, V
dd
=2.5V or 3.3V
1.4 1.7 F=266MHz, 312.5MHz, V
dd
=2.5V or
3.3V
RMS Phase Jitter (random) ( T
phj
) 0.6 0.85 ps F=156.25MHz, 312.5MHz, integration
bandwidth=12kHz to 20MHz
Parameters Min. Max. Unit
05156- erutarepmeT egarotS °C
V
DD
V 45.0-
Electrostatic Discharge (HBM) 2000 V
Soldering Temperature
(follow standard Pb free soldering guidelines) 260 °C
Package θJA, 4 Layer Board
(°C/W)
θJC, Bottom
(°C/W)
7.0 x 5.0mm, 6-pin 142 27
5.0 x 3.2mm, 6-pin 97 20
3.2 x 2.5mm, 6-pin 109 20
ASTMUPLD
High Performance, Programmable LVDS SMD MEMS Oscillator
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
Pb
RoHS/RoHS II compliant
PART IDENTIFICATION:
ASTMUPLD - - MHz- - -
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
Package Size
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Output Frequency
in MHz
e.g. 7.3728,
625.000
Freq. Stability
Y: ±10ppm
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
Supply Voltage
Blank: 2.25V~3.63V
25: 2.5V±10%
33: 3.3V±10%
Pin 1 Function
E: Output Enable
S: Standby
RECOMMENDED TERMINATION DIAGRAM
622.08MHZ, 3.3V, LVDS Output 100MHZ, 3.3V, LVDS Output
TYPICAL PHASE NOISE
ASTMUPLD
High Performance, Programmable LVDS SMD MEMS Oscillator
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
Pb
RoHS/RoHS II compliant
Dimensions: mm
3.2 x 2.5mm Package (Option “E”)
Recommended Land Pattern
5.0 x 3.2mm Package (Option “FL”) Recommended Land Pattern
7.0 x 5.0mm Package (Option “V”) Recommended Land Pattern
OUTLINE DIMENSION:
Pin Name Functionality
1 OE/ST
Output Enable H or Open: specified frequency output
L: output is high impedance. Only output driver is disabled
Standby
H or Open: specified frequency output
L: output is low (weak pull down). Device goes to sleep
mode. Supply current reduces to Istd.
2 NC No Connect Leave it floating or connect to GND for better heat
dissipation
3 GND Power Vdd power supply ground(1)
4 Out+ Output Oscillator output
5 Out- Output Complementary oscillator output
6 Vdd Power Power supply voltage(1)
Notes: 1. A capacitor value of 0.1µF between V
dd
and GND is recommended.
ASTMUPLD
High Performance, Programmable LVDS SMD MEMS Oscillator
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
Pb
RoHS/RoHS II compliant
REFLOW PROFILE:
Item Conditions
T
S
MAX to T
L
(Ramp-up Rate) 3°C/second max
Preheat
Temperature Minimum (T
S
MIN) 150°C
Temperature Typical (T
S
TYP) 175°C
Temperature Maximum (T
S
MAX) 200°C
Time (t
S
sdnoces 081 – 06 )
Ramp-up Rate (T
L
to T
P
) 3°C/second max
Time Maintained Above
Temperature (T
L
) 217°C
Time (t
L
sdnoces 051 – 06 )
Peak Temperature (T
P
) 260°C max
Target Peak Temperature (T
P
Target) 255°C
Time within 5°C of actual peak (t
P
) 20 – 40 seconds
Max. Number of Reflow Cycles 3
Ramp-down Rate 6°C/second max
Time 25°C to Peak Temperature (t) 8 minutes max
ASTMUPLD
High Performance, Programmable LVDS SMD MEMS Oscillator
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
Pb
RoHS/RoHS II compliant
Unit: mm
Device Size D0 D1 min. E1 E2 min. F P0 P1 P2
3225 1.5+0.1/-
0.0 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05
5032 1.5+0.1/-
0.0 1.5 1.75±0.1 10.25 5.5±0.05 4.0±0.1 8.0±0.1 2.0±0.05
7050 1.5+0.1/-
0.0 1.5 1.75±0.1 14.25 7.5±0.1 4.0±0.1 8.0±0.1 2.0±0.1
Unit: mm
Device Size T T1 max. T2 max. W max. A0 B0 K0
3225 0.6 0.1 1.65 12.3 2.8±0.10 3.5±0.10 1.10±0.10
5032 0.6 0.1 1.65 12.3 3.5±0.10 5.3±0.10 1.10±0.10
7050 0.6 0.1 1.80 16.3 5.4±0.10 7.4±0.10 1.3±0.10
TAPE & REEL:
Unit: mm
Tape Size A max. B min. C D min. N W1 W2 max.
12mm 180 1.5 13.0±0.2 20.2 60±0.5 12.4+2.0/-0 18.4
330 1.5 13.0±0.2 20.2 100±0.5 12.4+2.0/-0 18.4
16mm 180 1.5 13.0±0.2 20.2 60±0.5 16.4+2.0/-0 22.4
330 1.5 13.0±0.2 20.2 100±0.5 16.4+2.0/-0 22.4
Device Size “T” (1k/reel) “T3” (3k/reel)
3225 12mm Tape7” Reel12mm Tape7” Reel
5032 12mm Tape7” Reel12mm Tape13” Reel
7050 16mm Tape7” Reel16mm Tape13” Reel
ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive
Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high
reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
ASTMUPLD
High Performance, Programmable LVDS SMD MEMS Oscillator
ASTMUPLD
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
Terms and Conditions of Sale visit: Visit www.abracon.com
LLC
ABRACON IS
ABRACON IS
ISO9001:2015
CECERRTIFIED TIFIED
REVISED: 12/14/2018
