Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Qxx25xx & Qxx25xHx Series (R) Description 25 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Features & Benefits * RoHS compliant * Glass - passivated junctions Agency Approval Agency * Voltage capability up to 1000 V Agency File Number TO-220L, TO-218K, TO-218J & Fastpak Packages: E71639 (R) Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Main Features Symbol IT(RMS) VDRM /VRRM IGT *S urge capability up to 250 A Value Unit 25 A 1000 V 50 to 80 mA Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol MT2 MT1 G Qxx25xx & Qxx25xHx Series 117 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings - Standard Triac Symbol IT(RMS) Parameter Test Conditions RMS on-state current Qxx25R5 Qxx25N5 TC = 85C Qxx25P5 TC = 57C Qxx25R5 Qxx25N5 ITSM Peak non-repetitive surge current Qxx25P5 I 2t Qxx25R5 Qxx25N5 I2t Value for fusing Value Unit 25 A single half cycle; f = 50Hz; TJ (initial) = 25C 167 single half cycle; f = 60Hz; TJ (initial) = 25C 200 single half cycle; f = 50Hz; TJ (initial) = 25C 220 single half cycle; f = 60Hz; TJ (initial) = 25C 250 tp = 8.3ms Qxx25P5 A 166 A2s 260 di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =125C 100 A/s IGTM Peak gate current TJ = 125C 2 A PG(AV) Average gate power dissipation TJ = 125C Tstg Storage temperature range Operating junction temperature range TJ 0.5 W -40 to 125 C Qxx25R5 Qxx25N5 -40 to 125 Qxx25P5 -25 to 125 Test Conditions Value Unit 25 A C Absolute Maximum Ratings - Alternistor Triac Symbol IT(RMS) ITSM I2t Parameter RMS on-state current Qxx25LH5 Qxx25L6 TC = 65C Qxx25K6 Qxx25J6 TC = 85C Qxx25RH5 Qxx25NH5 Qxx25R6 Qxx25NH6 TC = 95C single half cycle; f = 50Hz; TJ (initial) = 25C 208 single half cycle; f = 60Hz; TJ (initial) = 25C 250 I2t Value for fusing tp = 8.3ms 260 A2s Peak non-repetitive surge current A di/dt Critical rate-of-rise of on-state current f = 60Hz; TJ =125C 100 A/s IGTM Peak gate current TJ = 125C 2 A PG(AV) Average gate power dissipation TJ = 125C Tstg TJ 0.5 W Storage temperature range -40 to 125 C Operating junction temperature range -40 to 125 C Note: xx = voltage Qxx25xx & Qxx25xHx Series 118 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Standard Triac Value Symbol Test Conditions Quadrant IGT VD = 12V; RL = 60 VGT VGD VD = VDRM; RL = 3.3 k ; TJ = 125C IH IT = 400mA (initial) dv/dt Qxx25R5 Qxx25N5 Qxx25P5 I - II - III MAX. 50 IV TYP. 120 I - II - III MAX. 1.3 IV TYP. 2.5 ALL MIN. MAX. VD = VDRM; Gate Open; TJ = 125C 400V 600V 800V VD = VDRM; Gate Open; TJ = 100C 1000V MIN. (dv/dt)c (di/dt)c = 13.3 A/ms; TJ = 125C MIN. tgt IG = 2 x IGT; PW = 15s; IT = 35.4 A TYP. Unit mA V 0.2 V 100 50 mA 275 225 200 -- 475 400 200 -- V/s 5 V/s 4 3 s Electrical Characteristics (TJ = 25C, unless otherwise specified) -- Alternistor Triac Value Symbol IGT VGT Test Conditions VD = 12V; RL = 60 VGD VD = VDRM; RL = 3.3 k ; TJ = 125C IH IT = 400mA (initial) dv/dt Quadrant Qxx25RH5 Qxx25LH5 Qxx25NH5 Qxx25R6 Qxx25L6 Qxx25NH6 Qxx25K6 Qxx25J6 50 80 Unit I - II - III MAX. I - II - III MAX. 1.3 V I - II - III MIN. 0.2 V MAX. VD = VDRM; Gate Open; TJ = 125C 400V 600V 800V VD = VDRM; Gate Open; TJ = 100C 1000V MIN. mA 50 100 575 500 400 600 600 475 mA V/s -- 400 (dv/dt)c (di/dt)c = 13.3 A/ms; TJ = 125C MIN. 20 30 V/s tgt IG = 2 x IGT; PW = 15s; IT = 35.4 A TYP. 3 5 s Static Characteristics Symbol VTM Value Qxx25R5 Qxx25N5 Qxx25xH5 Qxx25P5 Qxx25x6 Qxx25NH6 Test Conditions IT = 35.4A; tp = 380 s MAX. TJ = 25C IDRM / IRRM VDRM / VRRM TJ = 100C TJ = 125C 600 - 800V 1000V 1.8 1.4 10 100 20 -- 500 -- 1000V 1000 -- 600 - 800V 2000 5000 600 - 800V MAX. Note: xx = voltage, x = package Qxx25xx & Qxx25xHx Series 119 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Unit V A Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Thermal Resistances Symbol Parameter Value Qxx25R5 / Qxx25N5 Qxx25R6 / Qxx25NH6 Qxx25RH5 / Qxx25NH5 0.89 Qxx25P5 1.6 Qxx25L6 / Qxx25LH5 2.0 Qxx25K6 / Qxx25J6 1.32 Qxx25Ry 45 Qxx25L6 / Qxx25LH5 50 Junction to case (AC) R(J-C) Junction to ambient R(J-A) Unit C/W C/W Note: xx = voltage, y = sensitivity Figure 2: N ormalized DC Gate Trigger Voltage vs. Junction Temperature Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature 2.5 Ratio of VGT / VGT(TJ = 25C) 2.0 Ratio of IGT/IGT(TJ = 25C) 2.0 1.5 1.0 1.5 1.0 0.5 0.5 0.0 0.0 -40 -15 10 35 60 85 110 -40 125 -15 Figure 3: Normalized DC Holding Current vs. Junction Temperature 35 60 85 110 125 1.6 1.7 Figure 4: O n-State Current vs. On-State Voltage (Typical) 2.0 90 Instantaneous On-state Current (iT) - Amps Ratio of IH / IH(TJ = 25C) 10 Junction Temperature (TJ) -- (C) Junction Temperature (TJ) -- (C) 1.5 1.0 0.5 TJ = 25C 80 70 Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5 60 50 40 30 20 Qxx25R5 Qxx25N5 10 0 0.0 -40 -15 10 35 60 85 110 125 Qxx25xx & Qxx25xHx Series 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Instantaneous On-state Voltage (vT) - Volts Junction Temperature (TJ) -- (C) 120 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Figure 5: Power Dissipation (Typical) vs. RMS On-State Current Figure 6: M aximum Allowable Case Temperature vs. RMS On-State Current 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 30 Maximum Allowable Case Temperature (TC) - C Average On-State Power Dissipation [PD(AV)] -- Watts 35 Qxx25R6 Qxx25NH6 Qxx25RH5 Qxx25NH5 120 25 Qxx25R5 Qxx25N5 Qxx25K6 Qxx25J6 110 Qxx25R5 Qxx25N5 100 20 15 Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5 10 5 0 90 Qxx25L6 Qxx25LH5 80 Qxx25P5 70 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 60 50 0 5 10 15 20 25 0 RMS On-State Current [IT(RMS)] -- Amps 5 10 15 20 25 RMS On-State Current [IT(RMS)] - Amps Figure 7: Maximum Allowable Ambient Temperature vs. RMS On-State Current (TO-220 packages only) Maximum Allowable Ambient Temperature (TA) --C 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING 100 80 60 40 20 0 0.0 0.5 1.0 1.5 2.0 2.5 RMS On-State Current [IT(RMS)] -- Amps Figure 8: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) - Amps 1000 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Qxx25P5/Qxx25R6 Qxx25L6/Qxx25NH6 Qxx25K6/Qxx25J6 Qxx25RH5/Qxx25LH5 Qxx25NH5 Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. 100 Qxx25R5 Qxx25N5 10 1 10 100 1000 Surge Current Duration -- Full Cycles Qxx25xx & Qxx25xHx Series 121 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 30 Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Soldering Parameters Pb - Free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Ramp-down Rate 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Physical Specifications Ramp-up TL tL TS(max) Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition tS time to peak temperature Time Environmental Specifications Test Terminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy High Temperature Voltage Blocking Temperature Cycling Biased Temp & Humidity High Temp. Storage Design Considerations Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Qxx25xx & Qxx25xHx Series Ramp-do Ramp-down 122 Revised: June 24, 2011 04:57 PM Specifications and Conditions MIL-STD-750: Method 1040, Condition A Rated VRRM, 125C, 1008 hours MIL-STD-750: Method 1051 -40C to 125C, 15-minute dwell, 100 cycles EIA/JEDEC: JESD22-A101 320VDC, 85C, 85%RH, 1008 hours MIL-STD-750: Method 1031 150C, 1008 hours Low-Temp Storage -40C, 1008 hours Thermal Shock MIL-STD-750: Method 1056 0C to 100C, 5-minute dwell, 10-second transfer, 10 cycles Autoclave EIA/JEDEC: JESD22-A102 (Pressure Cooker Test) 121C, 100%RH, 2atm, 168 hours Resistance to Solder Heat MIL-STD-750: Method 2031 260C, 10 seconds Solderability ANSI/J-STD-002, Category 3, Test A Lead Bend MIL-STD-750: Method 2036, Condition E (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-220AB (R Package) -- Non-isolated Mounting Tab TC MEASURING POINT AREA (REF.) 0.17 IN2 O A O E Dimension 8.13 .320 P MT2 B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H N K J M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). MT1 MT2 GATE Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions -- TO-220AB (L Package) -- Isolated Mounting Tab TC MEASURING POINT O A O E P Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H K N J MT1 MT2 GATE Qxx25xx & Qxx25xHx Series M Inches AREA (REF.) 0.17 IN2 Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 123 Revised: June 24, 2011 04:57 PM Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.66 2.92 C 0.230 0.250 5.85 6.35 D 0.590 0.620 14.98 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.80 3.30 G 0.540 0.575 13.71 14.60 H 0.025 0.035 0.63 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 1.78 2.16 N 0.018 0.024 0.45 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.53 R 0.038 0.048 0.97 1.22 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-263 (N Package) -- D2Pak Surface Mount TC MEASURING POINT B Dimension E MT2 7.01 .276 A 8.41 .331 S W U J K GATE MT1 G 8.13 .320 H D F 2.16 .085 11.68 .460 7.01 .276 7.01 .276 16.89 .665 8.89 .350 Inches AREA: 0.11 IN2 C V 1.40 .055 3.81 .150 Min Millimeters Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 Min Max Min A 0.810 0.835 20.57 21.21 B 0.610 0.630 15.49 16.00 2.03 .080 6.60 .260 Dimensions -- TO-218AC (K Package) -- Isolated Mounting Tab TC Measurement Point U (diameter) B Dimension C D A F E W Gate J P MT1 MT2 M Q R G N K L Qxx25xx & Qxx25xHx Series H Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 124 Revised: June 24, 2011 04:57 PM Inches Millimeters Max C 0.178 0.188 4.52 4.78 D 0.055 0.070 1.40 1.78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.74 H 0.075 0.095 1.91 2.41 J 0.575 0.625 14.61 15.88 K 0.211 0.219 5.36 5.56 L 0.422 0.437 10.72 11.10 M 0.058 0.068 1.47 1.73 N 0.045 0.055 1.14 1.40 P 0.095 0.115 2.41 2.92 Q 0.008 0.016 0.20 0.41 R 0.008 0.016 0.20 0.41 U 0.164 0.165 4.10 4.20 W 0.085 0.095 2.17 2.42 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Dimensions -- TO-218X (J Package) -- Isolated Mounting Tab C B Tc Measurement Point U (diameter) A D F E Z MT1 X W J Gate N R S P T M Y K G MT2 H L V Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Dimension A B C D E F G H J K L M N P R S T U V W X Y Z Inches Millimeters Min Max Min Max 0.810 0.610 0.178 0.055 0.487 0.635 0.022 0.075 0.575 0.256 0.220 0.080 0.169 0.034 0.113 0.086 0.156 0.164 0.603 0.000 0.003 0.028 0.085 0.835 0.630 0.188 0.070 0.497 0.655 0.029 0.095 0.625 0.264 0.228 0.088 0.177 0.042 0.121 0.096 0.166 0.165 0.618 0.005 0.012 0.032 0.095 20.57 15.49 4.52 1.40 12.37 16.13 0.56 1.91 14.61 6.50 5.58 2.03 4.29 0.86 2.87 2.18 3.96 0.410 15.31 0.00 0.07 0.71 2.17 21.21 16.00 4.78 1.78 12.62 16.64 0.74 2.41 15.88 6.71 5.79 2.24 4.49 1.07 3.07 2.44 4.22 0.420 15.70 0.13 0.30 0.81 2.42 Dimensions -- TO-3 (P Package) Fastpak -- Isolated Mounting Tab A Dimension B D A B C D E F G H I J K L M N O P Q R S T (MT1) T (MT2) T (Gate) U (MT1) U (MT2) U (Gate) V W MT2 H F MT1 Gate G E TC Measuring Point C I J (MT1, MT2) T U M L V W R K (Gate) 5-N S Q O P Thickness off all three copper-alloy terminals is .032" (0.81 mm). Inches Millimeters Min Max Min Max 1.531 1.177 0.843 0.780 0.783 0.874 0.161 0.386 0.508 0.079 0.047 0.307 0.372 0.043 0.315 0.098 0.846 0.244 0.106 0.321 0.321 0.220 0.246 0.246 0.183 0.120 0.175 1.543 1.185 0.850 0.795 0.791 0.906 0.169 0.465 0.587 0.087 0.055 0.319 0.396 0.059 0.331 0.106 0.886 0.256 0.130 0.329 0.329 0.228 0.254 0.254 0.191 0.130 0.185 38.90 29.90 21.40 19.80 19.90 22.20 4.10 9.80 12.90 2.00 1.20 7.80 9.45 1.10 8.00 2.50 21.50 6.20 2.70 8.15 8.15 5.60 6.25 6.25 4.65 3.05 4.45 39.20 30.10 21.60 20.20 20.10 23.00 4.30 11.80 14.90 2.20 1.40 8.10 10.05 1.50 8.40 2.70 22.50 6.50 3.30 8.35 8.35 5.80 6.45 6.45 4.85 3.30 4.70 Maximum torque to be applied to mounting tab is 8 in-lbs (0.904Nm). Qxx25xx & Qxx25xHx Series 125 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs Product Selector Part Number Voltage Gate Sensitivity Quadrants Package 400V 600V 800V 1000V I - II - III IV Qxx25R5 X X X X 50 mA 120 mA (TYP) TO-220R Qxx25N5 X X X X 50 mA 120 mA (TYP) TO-263 D2-Pak X X 50 mA 120 mA (TYP) Fastpak Qxx25P5 Qxx25RH5 X X X 50 mA TO-220R Qxx25LH5 X X X 50 mA TO-220L Qxx25NH5 X X X 50 mA TO-263 D2-Pak Qxx25R6 X X X 80 mA TO-220R X Qxx25L6 X X X X 80 mA TO-220L Qxx25NH6 X X X X 80 mA TO-263 D2-Pak 80 mA TO-218X X 80 mA TO-218AC Qxx25J6 X X X Qxx25K6 X X X Packing Options Part Number Marking Weight Packing Mode Base Quantity Qxx25R5 Qxx25R5 2.20g Bulk 500 Qxx25R5TP Qxx25R5 2.20g Tube 500 (50 per tube) Qxx25N5TP Qxx25N5 1.60g Tube 500 (50 per tube) Qxx25N5RP Qxx25N5 1.60g Embossed Carrier 500 Qxx25RH5 Qxx25RH5 2.20g Bulk 500 Qxx25RH5TP Qxx25RH5 2.20g Tube 500 (50 per tube) Qxx25LH5 Qxx25LH5 2.20g Bulk 500 Qxx25LH5TP Qxx25LH5 2.20g Tube 500 (50 per tube) Qxx25NH5TP Qxx25NH5 1.60g Tube 500 (50 per tube) Qxx25NH5RP Qxx25NH5 1.60g Embossed Carrier 500 Qxx25P5 Qxx25P5 21.4g Bulk 200 Qxx25R6 Qxx25R6 2.20g Bulk 500 Qxx25R6TP Qxx25R6 2.20g Tube 500 (50 per tube) Qxx25L6 Qxx25L6 2.20g Bulk 500 Qxx25L6TP Qxx25L6 2.20g Tube 500 (50 per tube) Qxx25NH6TP Qxx25NH6 1.60g Tube 500 (50 per tube) Qxx25NH6RP Qxx25NH6 1.60g Embossed Carrier 500 Qxx25J6TP Qxx25J6 5.23g Tube 250 (25 per tube) Qxx25K6TP Qxx25K6 4.40g Tube 250 (25 per tube) Qxx25xx & Qxx25xHx Series 126 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 25 Amp Standard & Alternistor (High Commutation) Triacs TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Gate MT1 / Cathode * * Cover tape MT2 / Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Part Numbering System Part Marking System Q 60 25 N H6 DEVICE TYPE Q: Triac or Alternistor VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 25: 25A TO-218AC (K Package) TO-218X (J Package) SENSITIVITY Standard Triac 5: 50mA Alternistor H5: 50mA 6: 80mA H6: 80mA Q6025R5 YM Q6025K6 (R) PACKAGE TYPE L : TO-220AB Isolated R : TO-220AB Non-Isolated N : TO-263 (D2 -Pak) K : TO-218AC Isolated J : TO-218X Isolated P : Fastpak (R) YMLXX Q6025L5 MY (R) Fastpak (P Package) Q6025P5 (R) Qxx25xx & Qxx25xHx Series 127 Revised: June 24, 2011 04:57 PM YMXXX (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.