SDSA4GH-008G - SANDISK - Datasheet.Directory

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

SSD P4 Sol i d Sta te Driv e

Product M a nua l

Rev 1.1

October 2010

The content of this d o c ument is subje ct to chang e witho ut no t ice

Doc u ment No. 80-11-XXXX1

SanDisk Corporation

Co r p o r a te He a d qua r ter s • 601 Mc C a r thy Blvd . • Milpitas, CA 95035

Pho ne ( 4 08) 80 1-1000 • Fax (408) 801-8657

www.sandisk.com

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

SanDisk Corporation general policy does not recommend the use of its products in life support or other applications

where in a f ailure or malfunction of the product may directly t hreaten life or injury. Per SanDisk Terms and Conditions

of Sale, the user of SanDisk product s in life support or other such applications assumes all risk of such use and agrees

to indemnify, def end and hol d harmless SanDisk Corporation and its affiliates against all damages. See “Disclaimer of

Liability.”

This document and related material is for information use only and is subject to c hange without prior notice. SanDi sk

Corporation ass umes no res ponsibility for any error s that may appear in this document or rel ated material, nor for any

damages or claims resulting from the furnishing, performance or use of this document or related material. SanDisk

Corporation explicitly disclaims any express and implied warranties and indemnities of any kind that may or could be

associated with this document and related material, and any user of this document or related material agrees to such

disclaimer as a precondition to receipt and usage hereof. No part of this document may be reproduced, transmitted,

trans cribed, stored in a retri evabl e manner or translated into any language or computer language, in any form or by

any means, electronic, mechani cal, magnetic, optical, chemical, manual or otherwise, wit hout t he prior wr itten consent

of an officer of SanDisk Corporation.

All parts of the SanDisk document ation are protected by copyri ght law and all rights are reserved.

SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation, registered in the U.S. and other

countries. All other brand names mentioned herein are for identification purposes only and may be trademarks and/or

register ed t rad em ar ks of t h eir respective h older ( s).

Document No. 80-11-XXXX1 05/10 Printe d in U.S.A .

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Revision

Revision History

Description Date

0.1 • Initi al draft May 20, 2010

0.2

• Major docu ment format changes

• Updated LDE values

• Update performance values

• Updated power consumption values

• Added SanDisk SSD P4 block diagram

• Added Standard SATA with large

screw hole size form factor mechan ical

specification & order ing inform ati on

• Updated Orde ring informatio n

(decoder keys )

July 15 , 2010

0.3 • Added 4GB capacity data

• Up d ate d Reliabilit y & MTTF nu m be rs August 9, 2010

0.4 • Added detai l s of 2.5”/7mm cased SSD

P4 form-factor Aug ust 27, 2010

0.5

• Update MTTF numbers for 4GB and

128GB capacities.

• Update Identify Data table:

o Word 69 – Changed Trim

support from Determinis tic to

non-Deterministic.

o Word 83 – Set correct bit to

ind ic ate SE T MAX Sec urity

Extension Supported.

o Wor d 105 – Indicate support

for 1 sect or of LBA Range

En tr ie s ( T r im ) .

Sept e mb er 27, 20 10

1.0

• Updated 4GB power consumption

numbers.

• Rem oved “ Preliminary” docu ment

status.

Octo be r 6, 20 10

1.1

• Update Identify Data table:

o Wo rd 77 now reports th e SAT A

Phy speed per the SAT A 3.0

specification.

• Added support of “Enhanced Mode”

Se curity Erase Unit command ( w ords

90 and 128).

October 28, 2010

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Table of Contents

1. INTRODUCTION ............................................................................................................................... 8

1.1 GENERAL DESCRIPTION ................................................................................................................. 8

1.2 KEY FEATURES ............................................................................................................................ 9

1.3 FUNCTIONAL DESCRIPTION .......................................................................................................... 10

1.4 DEFECT AND ERROR MANAGEMENT ............................................................................................... 10

1.5 WEAR LEVELING ....................................................................................................................... 10

1.6 BAD BLOCK MANAGEMENT ......................................................................................................... 10

1.7 NON-VOLATILE WRITE CACHE ...................................................................................................... 11

1.8 POWER MANAGEMENT .............................................................................................................. 11

2. GENERAL PRODUCT SPECIFICATIONS ............................................................................................ 13

2.1 INTERFACE ............................................................................................................................... 13

2.2 CAPACITY ................................................................................................................................ 13

2.3 PERFORMANCE ......................................................................................................................... 14

2.4 ENDURANCE ............................................................................................................................ 14

3. POWER CHARACTERISTICS ............................................................................................................ 15

3.1 SUPPLY VOLTAGE ...................................................................................................................... 15

3.2 AVERAGE POWER CONSUMPTION ................................................................................................. 15

3.3 ACTIVE POWER CONSUMPTION .................................................................................................... 15

3.4 LOW POWER MODE CONSUMPTION .............................................................................................. 16

4. PHYSICAL SPECIFICATION .............................................................................................................. 17

4.1 HALF 1.8” - STANDARD SATA CONNECTOR .................................................................................... 17

4.1.1 Standard SATA 4GB-64GB capacity ................................................................................... 17

4.1.2 Standard SATA 128GB capacity ........................................................................................ 19

4.1.3 Standard SATA with large screw hole size ......................................................................... 21

4.2 HALF 1.8” – MICRO-SATA CONNECTOR ........................................................................................ 23

4.2.1 Micro-SATA 8GB-64GB capacity ....................................................................................... 23

4.2.2 Micro-SATA 128GB capacity ............................................................................................. 25

4.3 MSATA FORM FACTOR .............................................................................................................. 27

4.3.1 mSATA 8GB-64GB capacity ............................................................................................... 27

4.3.2 mSATA 128GB capacity .................................................................................................... 29

4.4 MSATA MINI FORM FACTOR ....................................................................................................... 31

4.4.1 mSATA Mini 8GB-32GB capacity ....................................................................................... 31

4.4.2 mSATA Mini 64GB capacity .............................................................................................. 33

4.5 7MM CASED FORM FACTOR ........................................................................................................ 35

4.5.1 2.5” 7mm Cased Form Factor 4GB-64GB ........................................................................... 35

5. ENVIRONMENTAL SPECIFICATIONS ............................................................................................... 36

5.1 TEMPERATURE ......................................................................................................................... 36

5.2 HUMIDITY ............................................................................................................................... 36

5.3 VIBRATION .............................................................................................................................. 36

5.4 SHOCK .................................................................................................................................... 36

5.5 ALTITUDE ................................................................................................................................ 36

5.6 ELECTROSTATIC DISCHARGE (ESD) ................................................................................................ 37

5.7 ACOUSTICS .............................................................................................................................. 37

5.8 EMI/RFI COMPLIANCE .............................................................................................................. 37

5.9 ROHS .................................................................................................................................... 37

5.10 REGULATIONS .......................................................................................................................... 38

6. RELIABILITY CHARACTERISTICS ...................................................................................................... 39

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

6.1 ERROR RATE ............................................................................................................................ 39

6.2 MTTF (MEAN-TIME-TO-FAILURE) ................................................................................................ 39

7. INTERFACE .................................................................................................................................... 40

7.1 SUPPORTED STANDARDS ............................................................................................................. 40

7.2 PIN ASSIGNMENTS – STANDARD SATA ........................................................................................... 40

7.3 PIN ASSIGNMENTS – MICRO-SATA ............................................................................................... 41

7.4 PIN ASSIGNMENTS – MSATA ....................................................................................................... 42

8. SUPPORTED ATA COMMANDS ...................................................................................................... 43

8.1 IDENTIFY DATA ......................................................................................................................... 46

8.2 LOG PAGES .............................................................................................................................. 50

9. ORDERING INFORMATION ............................................................................................................ 51

10. CONTACT INFORMATION ......................................................................................................... 52

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Table of Figures

FIGURE 1-1: SANDISK SSD P4 BLOCK DIAGRAM .................................................................................................. 8

FIGURE 1-2: SANDISK SSD P4 NCACHE™ TECHNOLOGY ....................................................................................... 11

FIGURE 4-1: STANDARD SATA 4GB-64GB TOP AND SIDE VIEW WITH KEEP OUT AREA ................................................. 17

FIGURE 4-2: STANDARD SATA 4GB-64GB TOP/BOTTOM VIEW WITH MORE DETAILS ................................................. 18

FIGURE 4-3: STANDARD SATA 128GB TOP/BOTTOM VIEW WITH KEEP OUT AREA ...................................................... 19

FIGURE 4-4: STANDARD SATA 128GB TOP VIEW WITH MORE DETAILS AND SIDE VIEW ................................................ 20

FIGURE 4-5: STANDARD SATA WITH LARGE SCREW HOLE SIZE TOP VIEW WITH MORE DETAILS ........................................ 21

FIGURE 4-6: STANDARD SATA WITH LARGE SCREW HOLE SIZE BOTTOM VIEW & SIDE VIEW ........................................... 22

FIGURE 4-7: MICRO-SATA 8GB-64GB TOP/BOTTOM VIEW ................................................................................ 23

FIGURE 4-8: MICRO-SATA 8GB-64GB TOP AND SIDE VIEWS WITH MORE DETAILS .................................................... 24

FIGURE 4-9: MICRO-SATA 128GB TOP/BOTTOM VIEW ..................................................................................... 25

FIGURE 4-10: MICRO-SATA 128GB TOP VIEW AND SIDE VIEW WITH MORE DETAILS ................................................. 26

FIGURE 4-11: MSATA 8GB-64GB TOP AND SIDE VIEW ...................................................................................... 27

FIGURE 4-12: MSATA 8GB-64GB BOTTOM VIEW ............................................................................................. 28

FIGURE 4-13: MSATA 128GB TOP AND SIDE VIEWS ........................................................................................... 29

FIGURE 4-14: MSATA 128GB BOTTOM VIEW ................................................................................................... 30

FIGURE 4-15: MSATA MINI 8GB-32GB TOP AND SIDE VIEWS ............................................................................. 31

FIGURE 4-16: MSATA MINI 8GB-32GB BOTTOM VIEW ..................................................................................... 32

FIGURE 4-17: MSATA MINI 64GB TOP AND SIDE VIEWS ..................................................................................... 33

FIGURE 4-18: MSATA MINI 64GB BOTTOM VIEW ............................................................................................ 34

FIGURE 4-19: 2.5” 7MM CASED FORM FACTOR ................................................................................................. 35

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Tab le of T ables

TABLE 2-1: SANDISK SSD P4 CAPACITY SPECIFICATION ........................................................................................ 13

TABLE 2-2: SANDISK SSD P4 PERFORMANCE .................................................................................................... 14

TABLE 2-3: SANDISK SSD P4 ENDURANCE ....................................................................................................... 14

TABLE 3-1: SANDISK SSD P4 SUPPLY VOLTAGE ................................................................................................. 15

TABLE 3-2: SANDISK SSD P4 AVERAGE POWER CONSUMPTION ............................................................................. 15

TABLE 3-3: SANDISK SSD P4 ACTIVE POWER CONSUMPTION ................................................................................ 15

TABLE 3-4: SANDISK SSD P4 POWER CONSUMPTION IN LOW POWER MODE ............................................................ 16

TABLE 4-1: MECHANICAL INFORMATION - STANDARD SATA FORM FACTOR ............................................................... 17

TABLE 4-2: MECHANICAL INFORMATION - STANDARD SATA WITH LARGE SCREW HOLE SIZE ........................................... 21

TABLE 4-3: MECHANICAL INFORMATION - MICRO-SATA FORM FACTOR ................................................................... 23

TABLE 4-4: MECHANICAL INFORMATION - MSATA FORM FACTOR ........................................................................... 27

TABLE 4-5: MECHANICAL INFORMATION - MSATA MINI FORM FACTOR ................................................................... 31

TABLE 4-6: MECHANICAL INFORMATION – 7MM CASED FORM FACTOR .................................................................... 35

TABLE 5-1: SANDISK SSD P4 TEMPERATURE SPECIFICATION ................................................................................. 36

TABLE 5-2: SANDISK SSD P4 HUMIDITY SPECIFICATION ....................................................................................... 36

TABLE 5-3: SANDISK SSD P4 VIBRATION SPECIFICATION ...................................................................................... 36

TABLE 5-4: SANDISK SSD P4 SHOCK SPECIFICATION ............................................................................................ 36

TABLE 5-5: SANDISK SSD P4 ALTITUDE SPECIFICATION ........................................................................................ 36

TABLE 5-6: SANDISK SSD P4 ESD SPECIFICATION .............................................................................................. 37

TABLE 5-7: SANDISK SSD P4 EMI/RFI COMPLIANCE .......................................................................................... 37

TABLE 5-8: SANDISK SSD P4 REGULATION STANDARDS ....................................................................................... 38

TABLE 6-1: SANDISK SSD P4 MTTF ............................................................................................................... 39

TABLE 7-1: STANDARD SATA CONNECTOR PIN ASSIGNMENT ................................................................................ 40

TABLE 7-2: MICRO-SATA CONNECTOR PIN ASSIGNMENT ..................................................................................... 41

TABLE 7-3: MSATA CONNECTOR PIN ASSIGNMENT ............................................................................................. 42

TABLE 8-1: SUPPORTED ATA COMMANDS ........................................................................................................ 45

TABLE 8-2: IDENTIFY DATA VALUES ................................................................................................................. 49

TABLE 8-3: SUPPORTED SMART LOG PAGES ..................................................................................................... 50

TABLE 9-1: ORDERING INFORMATION .............................................................................................................. 51

TABLE 9-2: EXAMPLES OF DECODED SKU .......................................................................................................... 51

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

1. Introduction

1.1 General Description

The SanDisk® SSD P4 builds on the momentum of the first and second generations

of pSSD and the overall trend in the market towards smaller, thinner computing

machines that e nabl e mobility and connectivity on the go.

Using NAND flash based storage to replace Hard Disk Drives, SSD P4 provides a

much improved user experience. In addition to being rugged and reliable, the third

generation modular SSD beats HDDs in every possible metric – power cons umption,

sequential and random read performances as well as sequential and random write

performances. The SATA interface aligns with the global transition in the industry,

which is enforced by the platform’s chipsets.

Using the advanced 32nm memory geometry provides for a low cost product which

beats the HDDs price in the capacity ranges of 4GB-32GB and provides a very

competitive product at capacities of 64GB and 128GB. In addition, the small form

factor enables further miniaturization of Netbooks, SmartBooks and Tablets

desi gns and opens doors for a whole range of other applications.

The SSD P4 product electrically complies with the SATA-II v er. 2.6 standards and i s

electrically compatible with a serial ATA disk drive.

In addition to the mass storage-specific NAND flash memory chips, th e SSD includes

an on-boa rd int elligent cont roller for ma naging i nterf ace pr otocols , data s tora ge and

retrieval, error-correcting code (ECC), defect handling and diagnostics, advance

power management and clock control. Using innovative data management

algorithms, the SSD P4 provides superior sequential and random IO performance,

and ensures data rel iability.

NAND Flash

SSD Controller

16-bit wide

NAND

Flash

Array - 1

High-Speed

NAND Flash I/F

NAND

Flash

Array - 0

16-bit wide

SATA Gen-II

Interface

SanDisk SSD P4

Figure 1-1: SanDisk SSD P4 Block Diagram

Unlike an HDD, the SSD P4 has no moving parts. It keeps working in environments

such as classrooms, kiosks and in space-restricted server racks. The patented flash

management technology brings top data integrity to the SSD, even during power

losses. Dynamic bad block management, dynamic and static wear-leveling, and

robust error detection and correction code (EDC/ECC) ensure data integrity.

Once the SSD has been configured by the host, it appears to the host as a standard

ATA (IDE) disk drive.

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

1.2 Key Features

High capacity, ultra-sma ll f orm f actor supp orting un forma tte d c apaci ties1

o Half 1 .8 ” wit h a 2.5” Standard SATA connector, complies to the Jedec-

297 standard

of 4GB,

8GB, 16GB, 32GB, 64GB and 12 8G B:

o Half 1.8” with a micro SATA connector

o Standard mSATA form factor with a Mini-PCIe connector, complies to

the J ed ec MO -30 0A standard

o mSATA Mini form f a ctor wit h a Mini-PCIe connector

Interface to host

o SATA II revisio n 2 . 6, 3.0Gbps

High performance2

o Host trans fer ra te : 300 MB/s

o Sustain e d Read: 160 MB/s

o Sustaine d Write : 100 MB/s

o 4K Rando m Write (Sustained): 135 IOPS

o 4K Random Wri te (Recovered): 690 IO P S

o 4K Random Read: 2200 IOPS

Low powe r consumption

o Typi cal read /write3

o Slumber mode: 60mW

: 0.18W

Highly reliable

o Mean time to failure (MTTF): 4,530,805 hours, based on Part Stress

Analysis

o Operating shock: 1,500G, 0. 5 mse c half sine

o Operating vibration: 5gRMS, 10-2000 Hz

o Ope ratin g temperatur e: 0˚C to 70˚C

o Non-operating temperature and storage: -55˚C to +85˚C

1 The logical capacity of the drive conforms to the IDEMA HDD Specification. See www.idema.org for

deta ils. S ome of the liste d cap a city is used f or f o rmatting a nd othe r f u nctions, an d thus is not av a ila b le f or

data storage. 1 megab yte (MB ) = 1 million b y te s; 1 g ig a b y te (GB ) = 1 b ill ion b ytes.

2 These performance numbers refer to the 32GB product. Based on internal testing; performance may

vary

3 Average (typical) power while running MobileMarkTM 2007 with Device Initiated Power Management

(DIPM) enable d .

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

1.3 Functional Description

SSD P4 contains a high level, intelligent subsystem. This intelligent (microprocessor)

subsystem provides many capabilities not found in other types of memory cards.

These ca p a bili ties include t he following:

• Standard ATA register and command set

• Supp o rt fo r Trim command

• S.M.A.R.T. feature supported

• Hos t independ en ce from det a ils of erasing and prog rammin g fla sh memory

• Sophisticated system for managing defects (similar to systems found in

magnetic disk drives)

• Sophisticated system for error recovery including a powerful error correction

code (ECC)

• Advanced power m ana gement for low power opera tion

• Implementation of dynamic and static wear-le veling to ex tend ca r d ’ s li f e

1.4 Defect and Error Management

SSD P4 contains a sophisticated defect and error management system that is similar

to the systems found in magnetic disk drives, and in many cases, offers

enhancements. If necessary, the SSD card will rewrite data from a defective sector

to a good sector. This action is completely transparent to the host and does not

consume any user data space.

The SSD soft error rate specification is much better than the magnetic disk drive

specification. In the extremely rare case that a read error does occur, the SSD P4

products have innovative algorithms to recover the data by using error detection

code and error correction code (EDC/ECC). These defect and error management

systems, coupled with the solid state construction, give SSD P4 unparalleled

reliability.

1.5 Wear Leveling

Wear leveling is an intrinsic part of the erase pooling functionality of SSDs using

NAND memory. Advanced features of dynamic and static wear-leveling, and

automatic block management are used to ensure an even distribution of write erase

cycle throughout the entire device, regardless of how dynamic or static the data

written is. This guarantees high data reliability and maximizes flash life expect ancy.

1.6 Bad Block Management

Bad blocks are occasionally created during the life cycle of a flash component, in a

phenomenon called dynamic bad-block accumulation. These bad blocks must be

marked and replaced dynamically in order to prevent read/write f ailures. When a bad

block is detected, the embedded Bad Block Mapping algorithm maps out the block,

wh ich wi ll be not used for storag e any more.

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

1.7 Non-Volatile Write Cache

The third generation of modular SSD, the SSD P4 supports a unique feature to

improve random write performance and ensure very positive user experience.

Studies show that modern operating systems mostly access the storage device using

small access bl ocks, wi th the majority being a 4KB access blocks.

The small logical access blocks conflict with the physical block structure (>1MB) for

the newer generation flash memory technology. Therefore, to bridge this difference,

SSD P4 employs a non-volatile SLC Flash write cache, nCacheTM

. The nCache™ is

used to accumulate these small writes (called segments) at high speed and then

flush & consolidate them to larger MLC section of the NAND Flash memory array in

the background during idle time.

Controller

SATA-II

I/F

MLC NAND Flash

nCache™

SLC Flash

nCache™

SLC Flash

Figure 1-2: SanDisk SSD P4 nCache™ technology

The cache size of the SSD P4 is over 500MB4

Also nCache™ is a non-vo latile ca che and he n c e the re is no e xp o sure to data lo ss

- an order of magnitude larger than

other competing solutions that use DRAM based cache. Due to its large size, for most

part of daily user activity nCache™ never overflows and the end users experience

high SLC burst performance rather than the sustained performance. Once the

nCache™ becomes full, the performance of SSD P4 drops to the steady state

condition. 5

1.8 Power Management

.

SSD P4 supports an advanced power management system that includes both Host

Initiated Power Management (HIPM) and Device Initiated Power Management

(DIPM).

Upon completion of a command, the SSD will ask the host to enter into Slumber

Mode to conserve power if no further commands are received within 20msec. By

directly entering Slumber mode and skipping partial mode will minimize power

consumption. In order to further enhance the SSD performance, the flash

management can utilize the time when the card is idle for performing internal house-

keeping operations. Doing those activities, i.e. – freeing up space in the nCache,

while the card is idle will not increase overall power consumption, since these

operations will have to be executed eventually. Executing them during idle time will

prevent stalling the host while they are taking place and will enable a better

utilization of the Data Cache, as it will have additional free space when the host will

4 The cache size scales with ca pacity . Fo r 3 2GB p r oduct th e cach e si ze is o v er 500M B .

5 In order to prevent any data loss during removal of the power supp ly (with Host Write Cache disabled),

the time it tak e s the in p ut v oltag e to d rop f rom the n ominal v oltag e d own to 2V must b e at le ast 5ms.

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

access the device. These operations are executed internally, while the card is

indi cating status ready to the host. At the moment a new command i s received from

the host the internal operations will be terminated and the host command will be

serviced with minimal delay. If n o comman d is received the execution of the h ouse-

keeping activities will be limited to 30 secon ds, to preserve power consumption.

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

2. General Product Specifications

2.1 Interface

The SSD P4 interface complies with the Serial ATA standard publi shed by A NSI. The

device complies with the SATA II, ver. 2.6 specifications an d supports ATA-8 ACS.

For more information, refer to the American National Standard X3.221: AT

Attachment for Interface for Disk Drives document. Documentation can be ordered

from IHS by calling 1-800-854-7179 or accessing their Web site:

http://global.ihs.com

2.2 Capacity

Table 2-1: SanDisk SSD P4 Capacity Specification

6 1 gigab yte (GB) = 1 billion b ytes. S ome of the listed cap acity is use d for f ormatting an d other f unction s,

and thus is not available for data storage.

7 1 Sector = 512 bytes.

Unformatted

Capacity6Total Number of

User-

Addressable

Sectors in LBA

Mode

7

Number of

Logical

Cylinders

Number of

Logical

Heads

Number of

Logical

Sectors per

Track

4GB 7,835,183 7,772 16 63

8GB 15,649,200 15,525 16 63

16GB 31,277,232 16,383 16 63

32GB 62,533,296 16,383 16 63

64GB 125,045,424 16,383 16 63

128GB 250,069,680 16,383 16 63

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

2.3 Performance

Table 2-2: SanDisk SSD P4 Performance

2.4 Endurance

Table 2-3: SanDisk SSD P4 Endurance

8 Using HDBench on Windows7™ OS based PC as a secondary drive with host write cache enabled. File

size of 100MB.

9 Using IOMETER 2006.07.27 with host write cache enabled. The mea surement is of 4KB aligned random

accesses across 100% of th e driv e ’ s ca p a ci ty.

10 LDE is calculated based on typical workload based on Windows OS. LDE is a direct function of user

work lo ad and acce ss p a t tern. LDE i s d e f in e d in te rms of Terab ytes Written, “TBW .”

Parameter Unit 4GB 8GB 16GB 32GB 64GB 128GB

Host transfer rate

SATA II,

3.0Gbps MB/s 300 300 300 300 300 300

Tra n s f er ra te s

Sequential

Read8MB/s

60 130 140 160 160 160

Sequential

Write MB/s 12 25 50 100 100 100

Random Read

[4KB]9IOPs

2600 2400 2300 2200 2200 2200

Rando m W rite –

Sustained [4KB] IOPs 50 100 135 135 135 120

Rando m W rite –

Recovered

[4KB]

IOPs 600 680 680 690 690 690

Typical p o we r-

on read y t ime msec. 250

typical;

500 max

250

typical;

500 max

250

typical;

500 max

250

typical;

500 max

250

typical;

500 max

250

typical;

500 max

Parameter 4GB 8GB 16GB 32GB 64GB 128GB

Long Term Data

Endurance (LDE)10 2.5TBW

5TBW 10TBW 20TBW 40TBW 80TBW

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

3. P ower Chara c teristics

3.1 Supply Voltage

Table 3-1: SanDisk SSD P4 Su pply Volt a ge

3.2 Average Power Consumption11

Table 3-2: SanDisk SSD P4 Averag e Power Con s umpt ion

3.3 Active Powe r Consumption12

Input Voltage Parameter 4GB 8GB 16GB 32GB 64GB 128GB

5V ± 5% Read [ mW ] 475 500 550 700 725 725

Write [mW ] 500 600 900 1425 1450 1450

3.3V ± 5% Read [ mW ] 375 450 500 650 650 650

Write [mW ] 400 500 850 1200 1400 1400

Table 3-3: SanDisk SSD P4 Active Power Consumption

11 Average (typical) power while running MobileMarkTM 2007 with Device Initiated Power Management

(DIPM) enable d .

12 Active power consump tion is measure d during lon g se q ue n tial (e ith e r re ad o r write ) op e ra tion s.

Parameter Specifications

Input Voltage Form Factor

Standard SATA connector 5V ± 5%

Micro S ATA con n e ctor 3.3V ± 5%

mSATA / mSATA Mini 3.3V ± 5%

Maximum Ripple 70mV (peak to p ea k ),

0 – 30MHz

Sup p ly R ise Time 7 msec to 100 m sec

Input Voltage Parameter 4GB 8GB 16GB 32GB 64GB 128GB

5V ± 5% Read/Write

[mW] 170 180 180 200 200 200

3.3V ± 5% Read/Write

[mW] 140 140 140 175 175 175

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

3.4 Low Power Mode Consumption

Input

Voltage Parameter 4GB 8GB 16GB 32GB 64GB 128GB

5V ± 5% Partial / S lu mb e r

Mode [mW] 60 60 60 60 60 60

3.3V ± 5% Partial / S lu mb e r

Mode [mW] 57 57 57 57 57 57

Table 3-4: SanDisk SSD P4 Power Con sum ptio n in Low Power Mode

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4. Physical Specification

4.1 Ha lf 1.8” - Standard SATA Connector

Co m p lies w ith SFF-8156/ MO-2 97 s ta nd a rds

Parameter Specifications

Width 54mm

Length 39mm

Thickn e ss (ma x) 3.08m m ( 4-64GB), 4.38mm (128GB)

Connector 4.00mm

Typical W e ight 6.4g (8-32GB), 7.4g (64GB), 8.7g (128GB)

Table 4-1: Mechanical Information - Standard SATA form factor

4.1.1 St a nd ar d SAT A 4GB-64 GB capaci ty

Figure 4-1: Standard SATA 4GB-64GB Top an d Side view with keep out area

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-2: Standard SATA 4GB-64GB Top/Bottom View with more details

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.1.2 St a nd ar d SAT A 128GB capacity

Figure 4-3: Standard SATA 128GB Top/Bottom view with keep out area

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-4: Standard SATA 128GB Top view with more details and Side view

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.1.3 Standard SATA with large screw hole size

Parameter Specifications

Width 54mm

Length 38.75mm

Thickn e ss (ma x) 3.08mm

Connector 4.00m m

Typical W e ight 6.4g (8-32GB)

Table 4-2: Mechanical Information - Standard SATA with lar ge screw hole size

Figure 4-5: Standard SATA with large screw hole size Top View with more details

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-6: Standard SATA with large screw hole size Bottom View & Side view

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.2 Ha lf 1.8” – Micro-SATA Connector

Parameter Specifications

Width 54mm

Length 39mm

Thickn e ss (ma x) 3.08m m ( 8-64GB), 4.38mm (128GB)

Connector 4.00mm

Typical W e ight 5.9g (8-32GB), 6.9g (64GB), 8.1g (128GB)

Table 4-3: Mechanical Information - Micro-SATA form fa ctor

4.2.1 Micro-SATA 8GB-64GB capacity

Figure 4-7: Micro-SAT A 8GB-64GB Top/Bottom View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-8: Micro-SAT A 8GB-64GB Top and Side Views with more details

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.2.2 Micro-SATA 128GB capaci ty

Figure 4-9: Micro-SATA 128GB Top/Bottom View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-10: Micro-SATA 128GB Top View and Side View with more details

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.3 mSATA Form Facto r

Complies with MO-300 Standard

Parameter Specifications

Width 30mm

Length 50.95mm

Thickn e ss (ma x) 3.4mm (8-64GB), 3.7mm (128GB)

Typical W e ight 5g (8-32G B ), 6g (64G B ), 7.2g (128GB)

Table 4-4: Mechanical Information - mSATA form factor

4.3.1 mSATA 8GB-64GB capaci ty

Figure 4-11: mSATA 8GB-64GB Top and Side View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-12: mSATA 8GB-64GB Bottom View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.3.2 mSATA 128GB capacity

Figure 4-13: mSATA 128GB Top and Side views

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-14: mSATA 128GB Bottom view

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.4 mSATA Mini Form Factor

Complies with MO-300 Standard

Parameter Specifications

Width 30mm

Length 26.80mm

Thickn e ss (ma x) 3.4mm (8-32GB), 3.7m m (64 GB)

Typical W e ight 3.4g (8-32GB), 4.0g (64GB)

Table 4-5: Mechanical Information - mSATA Mini form factor

4.4.1 mSATA Mini 8GB-32GB capacity

Figure 4-15: mSATA Mini 8GB-32GB Top and Side Views

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-16: mSATA Mini 8GB-32GB Bottom View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.4.2 mSATA Mini 64GB capacity

Figure 4-17: mSATA Mini 64GB Top and Side Views

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Figure 4-18: mSA TA Mini 64 GB Bottom View

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

4.5 7mm Ca sed Form Factor

Co m p lies to SFF-xxxx

Parameter Specifications

Width 100.49mm

Length 69.85mm

Thickn e ss (ma x) 7mm

Typical W e ight TBD

Table 4-6: Mechanical Information – 7mm Case d form factor

4.5.1 2.5” 7mm Cased Form Factor 4GB-64GB

Figure 4-19: 2.5” 7mm cased Form Factor

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

5. Environmental Specifications

5.1 Temperature

Parameter Specifications

Operational 0°C to 70°C

Storage -55°C to 85°C

Maximu m te mp e ra ture g ra d ie n t 1°C pe r minute

Table 5-1: SanDisk SSD P4 Temperature Specification

5.2 Humidity

Parameter Specifications

Operational

Humidit y (N on condensation) 5% to 95%

Max imum w e t b u lb 35°C

Non-operational

Humidity (Non condensation) 5% to 95%

Max imum w e t b u lb 40°C

Maximu m re lati v e hu mid ity grad ie n t 20% p e r hour

Table 5-2: SanDisk SSD P4 Humidity Specification

5.3 Vibration

Parameter Specifications

Operational / Non-operational 5gRMS, 10-2000 Hz, 3 axes

Table 5-3: SanDisk SSD P4 Vibration Specification

5.4 Shock

Parameter Accele rat io n Fo rce H alf Sin e pu ls e duratio n

Opera tion al /

Non ope ra tional

1000G 1ms

1500G 0.5ms

Table 5-4: SanDisk SSD P4 Shock Specification

5.5 Altitude

Parameter Specifications

Non-Operational -1500ft (-457 m) to 40,000ft (12,192m)

Operational -1500ft (-457 m) to 10,000ft (3048m)

Table 5-5: SanDisk SSD P4 Altitude Specification

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

5.6 Electrostatic Discharge (ESD)

The SanDisk SSD P4’s are ESD tested per IEC 61000-4-2 Standard.

Parameter Test Voltage

Contact 2kV, 4kV

Air 4kV , 8kV

Table 5-6: SanDisk SSD P4 ESD Specification

5.7 Acoustics

The SSD P4 does not generate any acoustics noise (0dB).

5.8 EMI/RFI Compliance

The SanDisk SSD P4 is ce rtifie d to comply with the following standards.

Standard

FCC Part 15 Class B

IECS-003 Class B

EN 55022 Class B

EN 55024

KCC No. 2008-39

KCC No. 2008-38

CNS 13438

VCCI: 2006

AS/NZS CISPR 22: 2006

Table 5-7: SanDisk SSD P4 EMI/RFI Compliance

5.9 RoHS

European union’s restriction on use of hazardous substances in electrical and

electronic equi pment (EU RoHS) Directi ve 2002/95/E C.

China’s management methods for controlling pollution by electronic information

products (China RoHS).

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

5.10 Regulations

The SanDisk SSD P4 i s certifi ed with th e f ollowing certifications:

Standard

CE

UL (with file n umb e r)

CSA (or ULc)

CE

WEEE

TUV/SEMKO/UL/etc.

MIC (Korea) (with certif ication numbe r)

BSMI (Taiwa n) (with applicant code numb e r)

VCCI (Japan)

C-Tick (Australia)

FCC

China RoHS

HF (Halogen Free)

EuP

Table 5-8: SanDisk SSD P4 Regulation Standards

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

6. Reliability Characteristics

6.1 Error Rate

Non-recoverable error rate is 1 error per 1014

6.2 MTTF (Mean-Time-To-Failure)

bits read .

The rel iability figure of merit most often used for electronic equipment is Mean-Time-

To-Failure (MTTF). San Disk estimates MTTF using a prediction methodology base d in

accordance with the Telcordia Special Report SR-332. The prediction is based on a

Parts Stress An alysis.

Quality levels were defined as industrial grade (I) for all of the components. The

detailed prediction for the system was performed at a temperature of 25°C in a GB

environment.

The following table sum marize s the estimated M TTF re su lts fo r each capacity.

Capacity Condition MTTF ( H ours) Estimated FITs

4GB Telcord ia S R-332, GB , 25°C 5,100,000 196

8GB Telcord ia S R-332, GB , 25°C 4,958,071 202

16GB Telcord ia S R-332, GB , 25°C 4,806,968 208

32GB Telcord ia S R-332, GB , 25°C 4,530,805 215

64GB Telcord ia S R-332, GB , 25°C 4,063,862 221

128GB Telcord ia S R-332, GB , 25°C 2,912,038 343

Table 6-1: SanDisk SSD P4 MTTF

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

7. Interface

7.1 Supported Standards

The SSD P4 complie s w ith the following standards:

SAT A II, ver . 2.6

ATA-8 co mmand set

7.2 Pin Assignments – Standard SATA

S IGNA L Connec tor Pi nout:

Pin # Signal Name Description

S1 GND 2nd ma te

S2 A+ RxP

S3 A- RxM

S4 GND 2nd ma te

S5 B- TxM

S6 B+ TxP

S7 GND 2nd ma te

POWER Connector Pinout:

Pin # Signal Name Description

P1 V33 Not connected

P2 V33 Not connected

P3 V33 Not connected

P4 GND 1st mate

P5 GND 2nd mate

P6 GND 2nd mate

P7 V5 5V power input, pre-charge, 2nd mate

P8 V5 5V power input

P9 V5 5V power input

P10 GND 2nd mate

P11 DAS/RSS Device Activity S ig n al

P12 GND 1st mate

P13 V12 Not connected

P14 V12 Not connected

P15 V12 Not connected

Table 7-1: Standard SATA Connector Pin Assi gnment

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

7.3 Pin As signments – Micro-SATA

S IGNA L Connec tor Pi nout:

Pin # Signal Name Description

S1 GND 2nd ma te

S2 A+ RxP

S3 A- RxM

S4 GND 2nd ma te

S5 B- TxM

S6 B+ TxP

S7 GND 2nd ma te

POWER Connector Pinou t:

Pin # Signal Name Description

P1 V33 3.3V p ower

P2 V33 3.3V p ower – pre cha rg e

P3 GND GND

P4 GND GND

P5 V5 Not Connected

P6 V5 Not Connected

P7 DAS Device A ctiv ity Sig na l

P8 GND GND

P9 Optional N ot Conne cte d

Table 7-2: Micro-SATA Connect o r Pin Assignmen t

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

7.4 Pin As signments – mSATA

Pin # Assignment Description Pin # Assignment Description

1 No Connect 2 +3.3V 3.3V Source

3 No Connect 4 GND Return Current Path

5 No Connect 6 No Connect

7 No Connect 8 No Connect

9 GND Return Current Path 10 No Conn ect

11 No Connect 12 N o Conn e ct

13 No Connect 14 No Connect

15 GND Return Current Path 16 No Conne ct

17 No Connect 18 GND Return Current Path

19 No Connect 20 No Connect

21 GND Return Current Path 22 No Conne ct

23 +B - TXP Transmitter

Differential Signal

Pair

24 +3.3V 3.3V Source

25 -B - TXN Transmitter

Differe n tia l S ig n al

Pair

26 GND Return Current Path

27 GND Return Current Path 28 No Conne ct

29 GND Return Current Path 30 No Conne ct

31 -A - RXN Receiver Diff e re n tial

Sign al Pa ir 32 No Connect

33 +A - RXP Recei v e r Diff e re n tial

Sign al Pa ir 34 GND Return Current Path

35 GND Return Current Path 36 No Conne ct

37 GND Return Current Path 38 No Conne ct

39 +3.3V 3.3V Source 40 GND Return Current Path

41 +3.3V 3.3V Source 42 No Conne ct

43 No Connect 44 No Conn e ct

45 No Connect 46 No Conn e ct

47 No Connect 48 No Conn e ct

49 DA/DSS Device A ctiv ity 50 GND Return Current Path

51 Presence

Detection Pulled low by the

device 52 +3.3V 3.3V Source

Table 7-3: mSATA Connect o r Pin Assignme nt

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

8. Supported AT A Commands

The following table defines some of the common ATA commands supported by the

SSD P4. Specifics of each ATA command’s operation can be found in the AT

Attachm ent 8 – ATA/ATAPI Command Set (ATA-8 ACS) document .

Command Name ATA8 Code

Check Powe r M od e M E5h

Data Set Management O 06h

Trim 01h

Device Con f ig u ration Ov e rla y O B1h

DCO sub-

commands: Restore C0h

Freeze Lock C1h

Identify C2h

Set C3h

Id ent ify DMA C4h

Set DM A C5h

Download M icrocode O 92h

Download (without of f sets) and sav e microc od e . 07h

Execute Device Diagnostic M 90h

Flush Cache M E7h

Flush Cache Ext O EAh

Identify Device M ECh

Idle M E3h

Id le Im me d i a te M E1h

Initialize Drive Pa rame te rs Obs 91h

NOP O 00h

Read Buffer O E4h

Read DMA M C8h

Read DMA Ext O 25h

Read DMA w/o Re try Obs C9h

Read Log Ext O 2Fh

Read M ultiple M C4h

Read M ultiple Ex t O 29h

Read Native Max Address O F8h

Read Native Max Addr Ext O 27h

Rea d Secto rs M 20h

Rea d Secto rs E xt O 24h

Read S e ctors w/o Retry Obs 21h

Read Verify Sectors M 40h

Read V e rif y Sectors Ext O 42h

Read V e rif y Sectors w/o Retry Obs 41h

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Recalibrate Obs 1Xh

Security Disable P assword O F6h

Security Erase Pre pare O F3h

Security Erase Unit O F4h

Security Freeze Lock O F5h

Se cu rit y Set P a ssw ord O F1h

Security Unlock O F2h

Seek Obs 7Xh

Set Features M EFh

Set Featu res

sub-

commands:

Enab le write cache 02h

Set transfer mode 03h

Enable SATA features 10h

Device-Initiated Interface Power Management 03h

Soft ware S e t ting Preserv a tion 06h

Disable re ad lo ok -ahead 55h

Disable re v e rting to powe r-on de f aults 66h

Disable write cache 82h

Disable SATA features 90h

Device-Initiated Interface Power Management 03h

Soft ware S e t ting Preserv a tion 06h

Enab le re ad l ook -ahead AAh

Enab le re v e rtin g to p ow e r-on def aults CCh

Set Max Address O F9h

Security

Ext e ns ion

sub-

commands:

Set Ma x S e t Password 01h

Set Max Lock 02h

Set Max Unlock 03h

Set Max Freeze Lock 04h

Set Max Set Password DMA 05h

Set Max Unlock DMA 06h

Set Max Address Ext O 37h

Set M ult ip le M od e M C6h

Sleep M E6h

Smart O B0h

Smart sub-

commands:

Read Attribute Values (Read Data) D0h

Read A tt rib ute Thre sholds Obs D1h

Enab le /Disab le A ttribute A ut osav e O D2h

Save Attribute Values D3h

Execute

Offline

Immediate:

LBA

Low D4h

Execute off-line imme d ia te rout ine 00h

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Execute Short Self-test rou tine ( Of f lin e ) 01h

Execute Extended Self-test routine (O f f line ) 02h

Abort of f -lin e imme d ia te routi ne 7Fh

Execute Short Self-test routine (Cap tiv e ) 81h

Execute Extended Self-test routine (Captiv e ) 82h

Re a d Log D5h

Write Log D6h

Enab le Op e ra tions D8h

Disable Op e ra tions D9h

Read S ta tus DAh

Disable A uto Of f lin e Obs DBh

Standby M E2h

Standby Immediate M E0h

Write B u f f e r O E8h

Write DMA M CAh

Write DMA E x t O 35h

Write DMA FUA E x t M 3Dh

Write DMA w/o Re try Obs CBh

Write Log Ex t O 3Fh

Write M ultiple M C5h

Write M ultiple FUA Ext M CEh

Write M ultiple Ex t O 39h

Write S e ctors M 30h

Write S e ctors Ext O 34h

Write Se ctors w/o Retry Obs 31h

Write Uncorrecta b le Ext O 45h

Pseudo-UEC C with Logging 55h

M = Manda tory . O = Op tional. Obs = Obsolete

Table 8-1: Supported ATA Commands

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

8.1 Identify Data

The followin g ta b le defines the specifics of the Identify Data returned by the SSD P4.

Word

Address Default Value Total

Bytes Data Field Type Information

0 0040h 2 ATA Gen e ral con f ig ura tion : bit-signifi can t inf orma tion

1 3FFFh 2 ATA Default numb e r of cy lin d e rs (depends on capacity)

2 C837h 2 Reserved

3 0010h 2 Default number of heads

4-5 0000h 4 Obsolete

6 003Fh 2 Defaul t n u mb er of se cto rs p e r tra ck

7-9 0000h 6 Obsolete

10-19 ASCII 20 S e ria l n umb e r in A S CI I (left-justified)

20-22 0000h 6 Obsolete

23-26 SSD 8.XX 8 Firmware re v ision in A S CI I (left-justified)

27-46 SanDisk SSD P4

XXGB 40 Mod e l n umb e r in ASCII (left-justified)

47 8001h 2 Ma x imu m N o. o f se cto rs in Re a d /W rit e Mu ltip le command

48 0000h 2 Reserved

49 2F00h 2 LBA and MWDMA modes supported

50 4000h 2 Capabilities

51 0200h 2 PIO data tra nsfe r cy cle timing mode

52 0000h 2 Obsolete

53 0007h 2 Fie ld validit y

54 3FFFh 2 C urre nt n umb e r of cylind e rs (depends on capacity)

55 0010h 2 Current number of heads

56 003Fh 2 Curre nt se ctors pe r tra ck

57-58 XXXXh 4 Current ca p a ci ty in se ctors (LB As)

59 0101h 2 Multiple sector se tting is v al id (M ultiple = 1)

60-61 XXXXh 4 Total number of se ctors add re ssab l e in LBA Mode

62 0000h 2 Obsolete

63 0007h 2 Bits:15-8: Multiwo rd DMA mod e a ctive

Bits: 0-7: Multiword DMA modes supported

64 0003h 2 Advanced PIO modes supported

65 0078h 2 Min imum multiword DMA tran sfe r cy cle time per word (ns)

66 0078h 2 Re comme nd e d multi w ord DMA transf e r cy cle time p e r word

in ns

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Word

Address Default Value Total

Bytes Data Field Type Information

67 0078h 2 Min imum PIO t ran sfe r wi thout f low control

68 0078h 2 Min imum PIO t ran sfe r wi th IORDY flow control

69 1200h 2 ATA8-ACS2 Additional Supported

70-74 0000h 10 Reserved

75 0000h 2 Queue Depth

76 0206h 2 SATA capabilities

77 000Xh 2 SATA Additional capabilities (0002=1.5Gbps,

0004=3.0Gbps)

78 0048h 2 SATA Features Supported

79 0040h 2 SATA Features Enabled

80 01F0h 2 Ma jor Ve rsion numb e r

81 0107h 2 Min or V e rsion n umb e r

82 746Bh 2 Command set supported

83 7D01h 2 C omm an d sets suppor ted

84 4163h 2 Command set/f e a ture supported extension

85 7469h 2 Command set/feature enabled

86 BC01h 2 Command set/feature enabled

87 4163h 2 Command set/feature default

88 007Fh 2 Ultra DMA Mode supported and selected

89 0001h 2 Time re q ui red for security erase -unit comp le tion (all

capa ci ti e s comp l e t e < 2 mi nu t e s)

90 0001h 2 Time re q uire d for Enh an ced security e rase comple tion (all

capa ci ti e s comp l e t e < 2 mi nu t e s)

91 0000h 2 Current advanced p ower management value

92 FFFEh 2 Master Password Iden tif ie r

93 0000h 2 Hardware Reset Result

94 0000h 2 Current A A M V a lue

95 0000h 2 Stre a m Min Re q u e st S ize

96 0000h 2 Streaming Transfer Time-DMA

97 0000h 2 St re a m in g Access Late n cy

98-99 0000h 4 Streamin g Pe rformance Granularity

100-103 XXXXh 8 48-bit # of LBA' s

104 0000h 2 Streaming Transfer Time-PIO

105 0001h 2 Max # 512-byte B lock s in LBA R an g e En trie s

106 4000h 2 P hy sical Sector Size /Logical

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Word

Address Default Value Total

Bytes Data Field Type Information

107 0000h 2 Inter-Seek Delay f or ISO7779

108-111 5001B440XXXX

XXXXh 8 WWN

112-115 0000h 8 Reserved

116 0000h 2 Reserved for TLC

117-118 0000h 4 Logical Sector S ize

119 4004h 2 Command/Feature Sets Supported #4

120 4004h 2 Command/Feature Sets Enabled

121-126 0000h 12 Reserved

127 0000h 2 Obsolete

128 0021h 2 S e curity S ta tus

129-159 0000h 62 Reserved vendor-unique bytes

160-167 0000h 16 Reserved

168 0004h 2 Device N omina l Form Factor

169 0001h 2 ATA8-ACS2 Data Set Management Support

170-175 0000h 12 Reserved

176-205 0000h 60 Curre nt M e d ia S e rial Number (not supported )

206 0000h 2 SCT Comman d Transp ort

207-208 0000h 4 Reserved for CE-ATA

209 4000h 2 Alignment-Logical within Ph y sical B lock

210-211 0000h 4 Wr/Rd/V f y S e ctor Coun t Mod e 3

212-213 0000h 4 Wr/Rd/V f y S e ctor Coun t Mod e 2

214 0000h 2 NV Cache Ca p a b ilit ie s

215-216 0000h 4 NV Cache Size in Logical B lock s

217 0001h 2 Nominal Media Rotation Rate

218 0000h 2 Reserved

219 0000h 2 NV Cache Op tion s

220 0000h 2 Wr/Rd/V f y Fe ature S e t-Curre n t Mode

221 0000h 2 Reserved

222 1011h 2 Transport Major Version Number

223 0000h 2 Transpor t M inor Version Numb e r

224-233 0000h 20 Reserved for CE-ATA

234 0000h 2 Min Sector Count f or D L Microcode Mod e 3

235 0000h 2 Max S e ctor Count f or DL Mi crocode M od e 3

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

Word

Address Default Value Total

Bytes Data Field Type Information

236-254 0000h 38 Reserved for CE-ATA

255 XXXXh 2 Integrity W ord -Checksum

Table 8-2: Ident if y Data Values

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

8.2 Log Pages

The foll owing tab le d efine s th e list of supported Log Pages accessibl e through SMART

Write Log , SMART Read Log, Read Log Ext and Write Log Ext commands.

Log

Address Total

Pages Log Address Description

0 1 Gen e ral P urp ose Log Directory

3 ‘n’ Ext Comp re he n siv e S M A RT Error Log

6 1 SMART Self-Test Log

80h-9Fh 16 Host Vend or-sp ecif ic Logs

Table 8-3: Supported SMART Log Pages

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

9. Ordering informat ion

SDSA4XH-CCCG-YYYY

SD SanDisk

SA SATA

4 Generation: 3

X Form fa ctor:

A – Half 1.8" form factor, Standard SATA connector

B – Half 1.8" form factor, Standard SATA connector with lar g e scre w hole

D – mSATA form factor

E – Half 1.8" form factor, micro SATA connector

F – mSATA Mini f orm fa ctor

G – 2. 5” / 7 mm ca se d pro d u ct

H Flash Memory u se d: 32nm 32Gb MLC ABL

CCC Capacity:

004

008

016

032

064

128

G Units: GB

YYYY Customer code reference

Table 9-1: Ordering Information

Refer to the examples below as reference for ordering SKUs.

SKU # Details

SDSA4AH-032G-YYYY 32GB SSD P4 in Half 1.8" form f a ctor, Standard SATA connector

SDSA4DH-064G-YYYY 64GB SSD P4 in mSATA form factor

SDSA4EH-128G-YYYY 128GB SSD P4 in Half 1.8" f orm f actor, Micro-SATA connector

SDSA4FH-016G-YYYY 16GB SSD P4 in mSATA Min i f orm f actor

Table 9-2: Examples of decoded SKU

SSD P4 Solid S ta te Drive Product Manual

Rev 1.1

10. Contact information

USA

T el: +1-408-470-4440

Fax: +1-408-470-4470

OEMinfo@sandisk.com

Taiwan

T el: +886-2-2515-2522

Fax: + 886-2-2515-2295

OEMAsia@sandisk.com

Japan

T el: +81-3-5423-8101

Fax: + 81-3-5423-8102

OEMJapan@sandisk.com

Rest of the World & Israel

T el: +972-9-764-5000

Fax: + 972-3-548-8666

China

T el: +86-755-8348-5218

Fax: + 86-755-8348-5418

OEMChina@sandisk.com

Korea

T el: +82-2-3452-9079

Fax: + 82-2-3452-9145

Europe

T el: +33-(1)-43-37-2131

Fax: + 33-(1)-43-37-2111

OEMEurope@sandisk.com

For more information, please visit www.sandisk.com/SSD