IXGA 12N60B IXGP 12N60B HiPerFASTTM IGBT VCES IC25 VCE(sat) tfi(typ) = 600 V = 24 A = 2.1 V = 120 ns Preliminary data sheet Symbol Test Conditions Maximum Ratings VCES TJ = 25C to 150C 600 V VCGR TJ = 25C to 150C; RGE = 1 M 600 V VGES Continuous 20 V VGEM Transient 30 V IC25 TC = 25C 24 A IC90 TC = 90C 12 A ICM TC = 25C, 1 ms 48 A SSOA (RBSOA) VGE = 15 V, TVJ = 125C, RG = 33 Clamped inductive load, L = 300 H ICM = 24 @ 0.8 VCES A PC TC = 25C 100 W -55 ... +150 C TJM 150 C Tstg -55 ... +150 C TJ Md Mounting torque with screw M3 Mounting torque with screw M3.5 TO-220 AB (IXGP) C (TAB) G E TO-263 AA (IXGA) G E G = Gate, E = Emitter, C 300 Features l 4 Weight g l l l Test Conditions Characteristic Values (TJ = 25C, unless otherwise specified) min. typ. max. BVCES IC = 250 A, VGE = 0 V 600 VGE(th) IC = 250 A, VGE = VGE 2.5 ICES V CE = 0.8 VCES V GE = 0 V IGES VCE = 0 V, VGE = 20 V VCE(sat) IC = ICE90, VGE = 15 V (c) 2002 IXYS All rights reserved TJ = 25C TJ = 125C C = Collector, TAB = Collector 0.45/4 Nm/lb.in. 0.55/5 Nm/lb.in. Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Symbol C (TAB) V 5.0 V 100 1 A mA 100 nA 2.1 V Moderate frequency IGBT and antiparallel FRED in one package New generation HDMOSTM process International standard package JEDEC TO-220AB and TO-263AA High peak current handling capability Applications l l l l PFC circuit AC motor speed control DC servo and robot drives Switch-mode and resonant-mode power supplies 98909 (2/02) IXGA 12N60B IXGP 12N60B Symbol Test Conditions Characteristic Values (TJ = 25C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t 300 s, duty cycle 2 % Cies 11 S 860 pF 100 pF Cres 15 pF Qg 32 nC 10 nC 10 nC Coes Qge VCE = 25 V, VGE = 0 V, f = 1 MHz 5 IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc Inductive load, TJ = 25C 20 ns tri IC = IC90, VGE = 15 V, L = 300 H VCE = 0.8 VCES, RG = Roff = 18 20 ns tfi Eoff td(on) tri Eon td(off) tfi Eoff Pins: 2 - Collector 4 - Collector Dim. td(on) td(off) TO-220 AB Outline Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG 150 250 120 270 ns 0.5 0.8 mJ 20 ns 20 ns 0.15 mJ 200 ns 200 ns 0.8 mJ Inductive load, TJ = 125C IC = IC90, VGE = 15 V, L = 300 H VCE = 0.8 VCES, RG = Roff = 18 Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG ns A B C D E F G H J K M N Q R Millimeter Min. Max. 12.70 13.97 14.73 16.00 9.91 10.66 3.54 4.08 5.85 6.85 2.54 3.18 1.15 1.65 2.79 5.84 0.64 1.01 2.54 BSC 4.32 4.82 1.14 1.39 0.35 0.56 2.29 2.79 1 - Gate 3 - Emitter Bottom Side Inches Min. Max. 0.500 0.550 0.580 0.630 0.390 0.420 0.139 0.161 0.230 0.270 0.100 0.125 0.045 0.065 0.110 0.230 0.025 0.040 0.100 BSC 0.170 0.190 0.045 0.055 0.014 0.022 0.090 0.110 TO-263 AA Outline 1.25 K/W RthJC 0.25 RthCK K/W Min. Recommended Footprint (Dimensions in inches and mm) 1. 2. 3. 4. Gate Collector Emitter Collector Botton Side Dim. Millimeter Min. Max. Inches Min. Max. A A1 4.06 2.03 4.83 2.79 .160 .080 .190 .110 b b2 0.51 1.14 0.99 1.40 .020 .045 .039 .055 c c2 0.46 1.14 0.74 1.40 .018 .045 .029 .055 D D1 8.64 7.11 9.65 8.13 .340 .280 .380 .320 E E1 e 9.65 6.86 2.54 10.29 8.13 BSC .380 .270 .100 .405 .320 BSC L L1 L2 L3 L4 14.61 2.29 1.02 1.27 0 15.88 2.79 1.40 1.78 0.38 .575 .090 .040 .050 0 .625 .110 .055 .070 .015 R 0.46 0.74 .018 .029 IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025 6,306,728B1