OX-041 Oven Controlled Crystal Oscillator OX-041 Features Applications * Low Phase Noise * High Stability * SC-Cut Crystal Standard * Frequency Range: 5 MHZ to 20 MHZ * Previous Model: C4710, CO-724, CO-725, 6012, MC886 series, CO-714, CO-717 * * * * Test Equipment Frequency Synthesizers Position Location Satellite Communications Performance Specifications Parameter Min Typ Max Units Condition 1 Frequency Stabilities vs. operating temperature range (referenced to +25C) -30 -25 -20 -10 +30 +25 +20 +10 ppb ppb ppb ppb -40... +85C -40... +70C -20... +70C 0... +70C Initial Tolerance vs. supply voltage change vs. load change vs. aging / daily vs. aging / 1 year vs. aging / year (following years) Warm-up Time -100 -2.0 -2.0 -1.0 -100 -50 +100 +2.0 +2.0 +1.0 +100 +50 5 ppb ppb ppb ppb ppb ppb minutes at time of shipment, nominal EFC Vs 5% Load 5% after 72 hours of operation after 72 hours of operation to 10ppb of final frequency (1 hour reading) @ +25C Supply Voltage (Vs) Supply voltage (Standard) 11.4 12.0 12.6 VDC Supply voltage (Option) 14.25 15.0 15.75 VDC Oscillator Power Consumption 0.5 Watts Oven Power Consumption 6.0 2.0 Watts Watts during warm-up steady state @ +25C Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Parameter Min Typ Max Units Condition RF Output Signal (Standard) Sinewave Load 50 Output Power +3.0 ohm +5.5 Harmonics 40 Duty cycle +8.0 dBm 50 ohm load -30 dBc 50 ohm load 60 % HCMOS Signal (Option) 15 Load pF Signal Level (Vol) +0.5 +4.5 Signal Level (Voh) VDC 45 Duty cycle VDC 55 % @ (Voh-Vol)/2 Frequency Tuning (EFC) Tuning Range 0.75 1.25 Linearity 2.0 ppm 20 % Positive Tuning Slope Control Voltage Range 0.0 2.5 5.0 VDC Additional Parameters1 Reference Voltage 4.9 5.1 VDC Phase Noise (Standard) @10 MHZ -80 -120 -140 -145 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz Phase Noise3 (Option) @ 10 MHZ -95 -125 -150 -160 -165 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz Weight 100 g 3 5.0 Processing & Packing Handling & processing note Absolute Maximum Ratings Supply voltage (Vs) 28 V Output Load 50 25 pF ohm Operable temperature range -55 +85 C Storage temperature range -55 +125 C with HCMOS signal with Sinewave signal Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Dimensions in [mm] inches Type A Code Height "H" Pin Length "L" 0 26.42 6.35 1 20.00 6.35 Pin Connections 1 Oven Return 2 Oscillator Supply 3 Electronic Frequency Control (EFC) 4 Oven Supply 5 RF Output 6 Oscillator and Case Ground 7 Ground (Case) Dimensions in [mm] inches Type B Code Height "H" Pin Length "L" 2 26.42 6.35 3 20.00 6.35 Pin Connections 1 Electronic Frequency Control (EFC) 2 Reference Voltage Output 3 RF Output 4 Ground (Case) 5 Supply Voltage Input (Vs) Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Dimensions in [mm] inches Type C Code Height "H" Pin Length "L" 4 26.42 6.35 5 20.00 6.35 6 25.40 6.35 Pin Connections 1 Electronic Frequency Control (EFC) 2 Reference Voltage Output 3 RF Output 4 Ground (Case) 5 Supply Voltage Input (Vs) Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information OX - 041 0 - B A T-108 0 - 10M0000000 Frequency Product Family OX: OCXO Phase Noise Option 0: Standard 1: Option Package 50 x 50 mm Height 0: A26.42mm 1: A20.00mm 2: B26.42mm 3: B20.00mm 4: C26.42mm 5: C20.00mm 6: C25.40mm Supply Voltage A: 15 Vdc B: 12 Vdc Temperature Range / Stability Code E-308: -40C to +85C, 30ppb D-258: -40C to +70C, 25ppb J-208: -20C to +70C, 20ppb T-108: 0C to +70C, 10ppb RF Output Code A: HCMOS E: Sinewave Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 3/24/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com