Document Number: 31517
Revision 06-Aug-02
www.vishay.com
124
DFM 14
Vishay Dale
For Technical Questions, contact: ff2aresistors@vishay.com
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ030, Schematics A (11), B (12), J (15)
FEATURES
• 11, 12, 15 Schematics; hot-solder dipped
• MIL-PRF-83401 qualified
• Highly stable thick film
• TCR available in "K" (± 100ppm/°C) or "M" (± 300ppm/°C)
characteristic
• 100% screen tested per Group A, Subgroup 1 of
MIL-PRF-83401
• 0.065" [1.65mm] height for high density packaging
Derating
11 Schematic 12 Schematic 15 Schematic
Power Rating (Watts)
0.400
0.350
0.200
0.050
- 55 + 25 + 70 + 125 + 150
Ambient Temperature °C
DFM14-11
Package
Single
Resistor
DFM14-12
Package
- 55 + 25 + 70 + 125 + 150
Single
Resistor
- 55 + 25 + 70 + 125 + 150
DFM14-15
Package
0.400
0.350
0.200
0.015
0.400
0.325
0.200
0.025
Single
Resistor
MODEL POWER RATING CIRCUIT LIMITING ELEMENT TEMPERATURE1) STANDARD2) RESISTANCE
P70°CP70°CSCHEMATIC VOLTAGE COEFFICIENT TOLERANCE RANGE
ELEMENT PACKAGE MAX
WW V 쓖ppm/°C%Ω
DFM 0.050 0.350 11 50 “K” = 100 / “M” = 300 2 10R0 – 1M0
0.025 0.325 12 50 “K” = 100 / “M” = 300 2 10R0 – 1M0
0.015 0.350 15 50 “K” = 100 / “M” = 300 2 see table
STANDARD ELECTRICAL SPECIFICATIONS
1)Temperature Range: - 55°C to + 125°C
2) ± 1% and ± 5% tolerance available
• Consult factory for stocked values
Power Rating (Watts)
Ambient Temperature °C
Power Rating (Watts)
Ambient Temperature °C
www.vishay.com
125
DFM 14
Vishay Dale
Document Number: 31517
Revision 06-Aug-02
For Technical Questions, contact: ff2aresistors@vishay.com
DIMENSIONS in inches [millimeters]
0.825 [20.96]
Max.
0.250 [6.35]
Min. 0.250 [6.35]
Min.
0.075
[1.91]
Max.
0.305
[7.75]
Max.
0.019 ± 0.006
[0.483 ± 0.15]
0.365 [9.27] Min.
0.385 [9.78] Max.
0.050 [1.27]
Typ.
Pin #1
0.005 + 0.004
- 0.002
[0.127 + 0.102
- 0.051]
Thick Film Resistor Networks, Flat Pack
* The J-schematic resistance values are specified by a 4-digit code, which comes from MIL-PRF-83401.
The codes and corresponding resistance values are:
CODE R1 (Ohms) R2 (Ohms)
A001 82 130
A002 120 200
A003 130 210
A004 160 260
A005 180 240
A006 180 390
A007 220 270
A008 220 330
A009 330 390
DFM14-11, 12, 15 = Type G (hot-solder dipped).
Hot-solder dipped leads supplied as standard finish.
11 SCHEMATIC
12 SCHEMATIC
15 SCHEMATIC
M8340103
M8340103
M8340103
DETAIL SPEC. NO.
"K" = ± 100ppm/°C
"M" = ± 300ppm/°C
M
M
K
CHARACTERISTIC
G
G
G
TOLERANCE
The first three digits are
significant figures and the last
digit specifies the number of
zeros to follow = 11 and 12
schematics. For 15
schematic see footnote (*).
6801
6801
A001*
RESISTANCE VALUE
EXAMPLE:
M8340103KA001GJ = A flat pack
resistor network with 14 pins, a TCR
of ± 100ppm/°C, R1 resistance value of 82
ohm, R2 resistance value of 130 ohm,
tolerance of ± 2% and schematic "J".
EXAMPLE:
M8340103M6801GB = A flat pack
resistor network with 14 pins, a TCR
of ± 300ppm/°C, resistance value of
6.8k ohm, tolerance of ± 2% and to
schematic "B".
M8340103 =14 Pin
Flat Pack
RZ030
F = ± 1%
G = ± 2%
J = ± 5%
A
B
J
SCHEMATIC
EXAMPLE:
M8340103M6801GA = A flat pack
resistor network with 14 pins, a TCR
of ± 300ppm/°C, resistance value of
6.8k ohm, tolerance of ± 2% and to
schematic "A".
ORDERING INFORMATION - MILITARY PART NUMBER
CODE R1 (Ohms) R2 (Ohms)
A010 330 470
A011 330 680
A012 1.5k 3.3k
A013 3k 6.2k
A014 180 270
A015 270 270
A016 560 560
A017 560 1.2k
A018 620 2.7k
Document Number: 31517
Revision 06-Aug-02
www.vishay.com
126
DFM 14
Vishay Dale
For Technical Questions, contact: ff2aresistors@vishay.com
Thick Film Resistor Networks, Flat Pack
CIRCUIT APPLICATIONS
12 Schematic
11 Schematic
15 Schematic
DFM14-11 (M8340103xxxxxxA)
7 isolated resistors
The DFM14-11 provides the user with 7 nominally equal resistors with each resistor
isolated from all others. Commonly used in the following applications:
•"Wired OR" Pull-up •Line Termination •LED Current Limiting
•Power Driven Pull-up •ECL Output Pull-down •Power Gate Pull-up
• TTL Input Pull-down •Long-line Impedance balancing
DFM14-15
DFM14-12
Pin #1
Pin #1
DFM14-12 (M8340103xxxxxxB)
13 resistors with one pin common
The DFM14-12 provides the user with a choice of 13 nominally equal resistors,
each connected to a common pin. Commonly used in the following applications:
•MOS/ROM Pull-up/ • "Wired OR" Pull-up •Digital Pulse Squaring
• Pull-down •Power Driven Pull-up •TTL Input Pull-down
•Open Collector Pull-up •TTL Unused Gate Pull-up •High Speed Parallel Pull-up
DFM14-15 (M8340103xxxxxxJ)
12 pairs of resistors
The DFM14-15 provides the user with a choice of 12 pairs of R1/R2 resistor values for
pulse squaring and TTL dual-line terminating requirements.
DFM14-11
••••
•
••
14 R1 R1 R1 R1 R1 R1
R2 R2R2 R2 R2
R1 R1 R1 R1 R1 R1
R2
R2 R2 R2
R2 R2 R2
1
www.vishay.com
127
DFM 14
Vishay Dale
Document Number: 31517
Revision 06-Aug-02
For Technical Questions, contact: ff2aresistors@vishay.com
MAX. ∆R (Typical Test Lots)
± 0.50% ∆R
± 0.50% ∆R
± 0.25% ∆R (Char. K)
± 0.50% ∆R (Char. M)
± 0.25% ∆R (Char. K)
± 0.50% ∆R (Char. M)
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.50% ∆R (Char. K)
± 2.0% ∆R (Char. M)
± 0.25% ∆R
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
CONDITIONS
1.5 x rated power, applied 1.5 hours “ON” and 0.5 hours “OFF”
for 100 hours ± 4 hours at + 25°C ambient temperature
5 cycles between - 65°C and + 125°C
2.5 x rated working voltage, 5 seconds
45 minutes at full rated working voltage at - 65°C
240 hours with humidity ranging from 80% RH to 98% RH
Leads immersed in + 260°C solder to within 1/16" of body for 10 seconds
Total of 18 shocks at 100 g's
12 hours at maximum of 20 g's between 10 and 2,000 Hz
1000 hours at + 70°C, rated power applied 1.5 hours “ON”,
0.5 hour “OFF” for full 1000 hour period
1.5 pound pull for 30 seconds
10,000 Megohm (minimum)
No evidence of arcing or damage (200 V RMS for 1 minute)
Thick Film Resistor Networks, Flat Pack
Marking Resistance to Solvents Permanency testing per MIL-PRF-83401
Solderability Per MIL-PRF-83401.
Terminals Per MIL-STD-1276
DFM14-11, 12, 15 = Type G (hot solder dipped)
Hot solder dipped leads supplied
as standard finish.
Body Epoxy filled ceramic sandwich
MECHANICAL SPECIFICATIONS
