Bipolar Transistor Collector 3 2 Base Description: 1 Emitter A Silicon epitaxial PNP planer transistor in a TO-39 type package designed for use as drivers for high transistors in general purpose amplifier and switching circuits. Maximum Ratings: Characteristic Collector Emitter Voltage Symbol VCEO Rating 100 Unit Collector Base Voltage (IE = 0), VCBO Emitter Base Voltage (IC = 0), VEBO 4 Collector Current IC 1 A Base Current IB 500 mA Total Device Dissipation (TC = +25C), Ptot 10 Total Device Dissipation (TA = +25C), Ptot 1 Operating Junction Temperature, TJ +200 Storage Temperature Range, Tstg -65 to +200 Thermal Resistance, Junction-to-Case, RthJC 17.4 C/W Thermal Resistance, Junction-to-Ambient, RthJA 175 C/WC V W C www.element14.com www.farnell.com www.newark.com Page <1> 23/04/13 V1.0 Bipolar Transistor Electrical Characteristics: TA = +25C unless otherwise specified) Parameter Symbol Test Conditions ICBO VCB = 100V, IE = 0 1 ICEO VCE = 70V, IB = 0 10 A ICEV VCE = 100V, VBE = -1.5V 1 mA Collector Cutoff Current Min Max - VCE = 100V, VBE = -1.5V ,TC = +150C Emitter Cutoff Current Collector-Emitter Sustaining Voltage IEBO VEB = 4V, IC = 0 VCEO(SUS) IC = 10mA, IB = 0, Note 1 VCE(Sat) Collector-Emitter Saturation Voltage A 100 - IC= 250mA, IB = 25mA, Note 1 0.6 IC = 500mA, IB = 50mA, Note 1 1 - IC = 1A, IB = 200mA, Note1 Base-Emitter Voltage VCE = 2V, IC = 250mA hFE IC = 250mA, VCE = 2V, Note 1 IC = 1A, VCE = 2V, Note 1 5 fT VCE = 10V, IC = 100mA, f = 10MHz 30 Ccbo VCB = 20V, IE = 0, f = 1MHz - 50 hfe VCE = 1.5V, IC = 200mA, f = 1kHz 40 - Transition Frequency Collector-Base Capacitance Small-Signal Current Gain V 2 VBE(on) DC Current Gain Unit 1 40 150 - MHz pF Note: 1. Pulse Duration: 300s, Duty Cycle %2% Dimensions A B C D Min. 8.5 7.74 6.09 Max. 9.39 8.5 6.6 E F G H J K L 0.4 - 2.41 4.82 0.71 0.73 12.7 42 0.53 0.88 2.66 5.33 0.86 1.02 - 48 Dimensions : Millimetres Part Number Table Pin Configuration: 1. Emitter 2. Base 3. Collector Description Part Number Transistor, PNP, 1A, 100V, TO-39 2N5679 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 23/04/13 V1.0