934058124118 - NXP SEMICONDUCTORS

1. Product profile

1.1 General description

Planar passivated high commutation three quadrant triac in a SOT428 (DPAK)

surface-mountable plastic package. This "series E" triac balances the requirements of

commutatio n performance and gate sensitivity and is intended for interfacing with low

power drivers and logic ICs including microcontrollers.

1.2 Features and benefits

3Q technology for improved noise

immunity

Direct triggering from low power

drivers and logic ICs

High blocking voltage capability

High commutation capability

Planar passivated for voltage

ruggedness and reliability

Sensitive gate for easy logic level

triggering

Surface-mountable package

Triggering in three quadrants only

1.3 Applications

AC solenoids

General purpose motor control

Home appliances

1.4 Quick reference data

BTA204S-800E

3Q Hi-Com Triac

Rev. 6 — 10 May 2011 Product data sheet

DPAK

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

VDRM repetitive peak off-st ate

voltage --800V

ITSM non-repetitive peak

on-state current full sine wave; Tj(init) =25°C;

tp= 20 ms; see Figure 4;

see Figure 5

--25A

IT(RMS) RMS on-state current full sine wave; Tmb ≤107 °C;

see Figure 1; see Figure 2;

see Figure 3

--4A

Product data sheet Rev. 6 — 10 May 2011 2 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

2. Pinning information

3. Ordering information

Static characteristics

IGT gate trigger current VD=12V; I

T= 0.1 A; T2+ G+;

Tj=25°C; see Figure 7 --10mA

VD=12V; I

T= 0.1 A; T2+ G-;

Tj=25°C; see Figure 7 --10mA

VD=12V; I

T= 0.1 A; T2- G-;

Tj=25°C; see Figure 7 --10mA

Table 1. Quick reference data …continued

Symbol Parameter Conditions Min Typ Max Unit

Table 2. Pinning info rmation

Pin Symbol Description Simplified outline Graphi c sy mbol

1 T1 main terminal 1

SOT428 (DPAK)

2 T2 main terminal 2

3 G gate

mb T2 mounti n g ba se ; main terminal 2

sym051

Table 3. Orderi ng informatio n

Type number Package

Name Description Version

BTA204S-800E DPAK plastic single-ended surface-mounted package (DPAK); 3 leads

(one lead cropped) SOT428

Product data sheet Rev. 6 — 10 May 2011 3 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

4. Limiting values

Table 4. Limiting values

In accordance with the Absolute Maxi mum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VDRM repetitive peak off-state voltage - 800 V

IT(RMS) RMS on-state current full sine wave; Tmb ≤107 °C; see Figure 1;

see Figure 2; see Figure 3 -4A

ITSM non-repetitive peak on-state

current full sine wave; Tj(init) =25°C; t

p= 20 ms;

see Figure 4; see Figure 5 -25A

full sine wave; Tj(init) =25°C; t

p=16.7ms - 27 A

I2tI

2t for fusing tp= 10 ms; sine-wave pulse - 3.1 A2s

dIT/dt rate of rise of on-state current IT=6A; I

G= 0.2 A; dIG/dt = 0.2 A/µs - 100 A/µs

IGM peak gate current - 2 A

PGM peak gate power - 5 W

PG(AV) average gate power over any 20 ms period - 0.5 W

Tstg storage temperature -40 150 °C

Tjjunction temperature - 125 °C

Fig 1. RMS on-state current as a function of mounting

base temperature; maximum values Fig 2. RMS on-state current as a function of surge

duration; maximum values

Tmb (°C)

-50 150100050

003aad615

IT(RMS)

(A)

107 °C

003aag083

-2

-1

1 10

su rge duration (s )

T(RMS )

(A)

Product data sheet Rev. 6 — 10 May 2011 4 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

Fig 3. Total power dissipation as a function of RMS on-state current; maximum values

Fig 4. No n-repetitive peak on-state current as a function of pulse width ; maxi mum va lues

003aag081

Ptot

(W)

IT(RMS) (A)

120

a = 180

0 54 125

122

119

116

113

110

107

104

101

231

Tmb(max)

(°C)

conduction

angle

(degrees)

form

factor

120

180

2.8

2.2

1.9

1.57

003aag085

-5

-4

-3

-2

-1

(s)

TSM

(A)

(1)

TSM

j(init)

= 25 °C max

Product data sheet Rev. 6 — 10 May 2011 5 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

f = 50 Hz

Fig 5. No n-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum

values

003aag086

ITSM

(A)

number of cycles

1103

102

TSM

j(init)

= 25 °C max

1/f

Product data sheet Rev. 6 — 10 May 2011 6 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

5. Thermal characteristics

Table 5. Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

Rth(j-mb) thermal resistance from junction to

mounting base full cycle; see Figure 6 --3K/W

half cycle; see Figure 6 --3.7K/W

Rth(j-a) thermal resistance from junction to

ambient in free air; printed circuit board

(FR4) mounted -75-K/W

(1) Unidirectional (half cycle)

(2) Bidirectional (full cycle)

Fig 6. Transient thermal impedance from junction to mounting base as a function of pulse width

003aag087

tp (s)

10-5 11010-1

10-2

10-4 10-3

10-1

Zth(j-mb)

(K/W)

10-2

(1)

(2)

Product data sheet Rev. 6 — 10 May 2011 7 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

6. Characteristics

Table 6. Characteristics

Symbol Parameter Conditions Min Typ Max Unit

Static characteristics

IGT gate trigger current VD=12V; I

T= 0.1 A; T2+ G+; Tj=25°C;

see Figure 7 --10mA

VD=12V; I

T= 0.1 A; T2+ G-; Tj=25°C;

see Figure 7 --10mA

VD=12V; I

T= 0.1 A; T2- G-; Tj=25°C;

see Figure 7 --10mA

ILlatching current VD=12V; I

G= 0.1 A; T2+ G+ ;

Tj= 25 °C; see Figure 8 --12mA

VD=12V; I

G= 0.1 A; T2+ G-; T j=25°C;

see Figure 8 --18mA

VD=12V; I

G= 0.1 A; T2- G-; Tj=25°C;

see Figure 8 --12mA

IHholding current VD=12V; T

j=25°C; see Figure 9 --12mA

VTon-state voltage IT=5A; T

j=25°C; see Figure 10 -1.41.7V

VGT gate trigger voltage VD=12V; I

T= 0.1 A; Tj=25°C;

see Figure 11 -0.71.5V

VD= 400 V; IT=0.1A; T

j=125°C;

see Figure 11 0.25 0.4 - V

IDoff-state current VD= 800 V; Tj= 125 °C - 0.1 0.5 mA

Dynamic character istics

dVD/dt rate of rise of off-state voltage VDM =536V; T

j= 125 °C; exponential

waveform; gate open circuit 30--V/µs

dIcom/dt rate of change of

commutating current VD= 400 V; Tj=125°C; I

T(RMS) =4A;

dVcom/dt = 0.1 V/µs; gate open circuit 8--A/ms

VD= 400 V; Tj=125°C; I

T(RMS) =4A;

dVcom/dt = 10 V/µs; gate open circuit 2.1--A/ms

tgt gate-controlled turn-on time ITM =12A; V

D=800V; I

G=0.1A;

dIG/dt = 5 A/µs -2-µs

Product data sheet Rev. 6 — 10 May 2011 8 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

(1) T2- G-

(2) T2+ G-

(3) T2+ G+

Fig 7. Normalized gate trigger current as a func tion of

junction temperature Fig 8. Normalized latching current as a function of

junction temperature

Vo = 1.27 V; Rs = 0.091 Ω

(1) Tj = 125 °C; typical values

(2) Tj = 125 °C; maximum values

(3) Tj = 25 °C; maximum values

Fig 9. Normalized holding current as a function of

junction temperature Fig 10. On-state current as a function of on-state

voltage

Tj (°C)

-50 150100500

003aad600

IGT

(1)

(2)

(3)

IGT(25°C)

Tj (°C)

-50 150100500

003aad604

IL(25°C)

Tj (°C)

-50 150100500

003aad606

IH(25°C)

VT (V)

0321

003aad611

(A)

(2) (3)

(1)

Product data sheet Rev. 6 — 10 May 2011 9 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

Fig 11. Normalized gate trigger voltage as a function of junction temperature

Tj (°C)

-50 150100500

003aad596

0.8

1.2

1.6

VGT

0.4

VGT(25°C)

Product data sheet Rev. 6 — 10 May 2011 10 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

7. Package outline

Fig 12. Package outline SOT428 (DPAK)

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT428 SC-63

TO-252

SOT42

06-02-14

06-03-16

DIMENSIONS (mm are the original dimensions)

lastic single-ended surface-mounted package (DPAK); 3 leads (one lead cropped)

mounting

base

b1c

0 5 10 mm

scale

UNIT

mm 0.93

0.46

5.46

5.00

0.56

0.20

6.22

5.98

6.73

6.47

10.4

9.6

2.95

2.55

2.38

2.22

1.1

0.9

b1e1

0.89

0.71

bcD

0.9

0.5

2.285 4.57

4.0

min

4.45

min

0.5

min

HDLw

0.2

max

0.2

Product data sheet Rev. 6 — 10 May 2011 11 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

8. Revision history

Table 7. Revision history

Document ID Release date Data sheet status Change notice Supersedes

BTA204S-800E v.6 20110510 Product data sheet - BTA204S_SER_D_E_F v.5

Modifications: •The format of this data sheet has been redesigned to comply with the new identity

guidelines of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Type number BTA204S-800E separated from data sheet BTA204S_SER_D_E_F v.5.

BTA204S_SER_D_E_F v.5 20060216 Product data sheet - BTA204S_SER_D_E_F v.4

Product data sheet Rev. 6 — 10 May 2011 12 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

9. Legal information

9.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of dev ice(s) desc r ibed in this document may have changed since this document was published and may differ in case of multiple devices. The latest product

status information is available on the Internet at URL http://www.nxp.com.

9.2 Definitions

Preview — The document is a preview version only. The document is still

subject to formal approval, which may result in modificat ions or additions.

NXP Semiconductors does not give any representations or warranties as to

the accuracy or completeness of informati on included herein and shall have

no liability for the consequences of use of such info rmation.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short data sheet is an extr act from a full data sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not b e relied u pon to cont ain det ailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semicond uctors sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall pre va il.

Product specifica t io n — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to off er functions and qualities beyond those described in the

Product data sheet.

9.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warrant ies, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information.

In no event shall NXP Semiconductors be liable for any indirect, incidental,

punitive, special or consequ ential damages (including - wit hout limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ aggregat e and cumulative liabil ity towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersed es an d r eplaces all inf ormation supplied pri or

to the publication hereof.

Suitability for use — NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in life support , life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expect ed

to result in perso nal injury, death or severe property or envi ronmental

damage. NXP Semiconductors accepts no liab ility for inclusion and/or use of

NXP Semiconductors products in such equipment or application s and

therefore such inclusion and/or use is at the customer’s own risk.

Quick reference data — The Quick reference dat a i s an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using NXP Semiconductors product s, and NXP Semiconductors

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suit able and fit for the custome r’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Custo mers should provide appropriate

design and operating safeguards to minimize the risks associate d with t heir

applications and products.

NXP Semiconductors does not accept any liabil i ty related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the appl ication or use by customer’s

third party custo m er(s). Customer is responsible for doing all necessary

testing for the customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications and

the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Document status [1] [2] Product status [3] Definition

Objective [short] data sheet Development This document contai ns data from the objective specification for product development.

Preliminary [shor t] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

Product data sheet Rev. 6 — 10 May 2011 13 of 14

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercia l

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individual agreement. In case an individual

agreement is concluded only the terms and conditions of the respecti ve

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

No offer to sell or license — Nothing in this document ma y be interpret ed or

construed as an of fer to se ll product s that is op en for accept ance or the grant ,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) d escribed herein may

be subject to export control regulat i ons. Export might require a pr ior

authorization from national authorities.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific NXP Semiconductors prod uct is automotive qualified,

the product is not suitable for automo tive use. It i s neit her qua lif ied nor test ed

in accordance with automotive testing or application requirements. NXP

Semiconductors accepts no liability for inclusion and/or use of

non-automotive qualified products in automotive equipment or applications.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and st andards, customer

(a) shall use the product without NXP Semiconductors’ warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

NXP Semiconductors’ specifications such use shall be solely at customer’s

own risk, and (c) customer fully indemnifies NXP Semiconduct ors for an y

liability, damages or failed product cl aims resulting from custome r design and

use of the product for automotive applications beyond NXP Semiconductors’

standard warranty and NXP Semiconductors’ product specif ications.

9.4 Trademarks

Notice: All referenced b rands, produc t names, service names and trademarks

are the property of their respective ow ners.

Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,

FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE,

ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse,

QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET,

TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V.

HD Radio and HD Radio logo — are trademarks of iBiquity Digital

Corporation.

10. Contact information

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

NXP Semiconductors BTA204S-800E

3Q Hi-Com Triac

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 10 May 2011

Document identifier: BTA204S-800E

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

11. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.1 General description . . . . . . . . . . . . . . . . . . . . . .1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . .1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . .1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . .2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . .2

4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3

5 Thermal characteristics . . . . . . . . . . . . . . . . . . .6

6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . .7

7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . .10

8 Revision history. . . . . . . . . . . . . . . . . . . . . . . . .11

9 Legal information. . . . . . . . . . . . . . . . . . . . . . . .12

9.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . .12

9.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

9.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . .12

9.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .1 3

10 Contact information. . . . . . . . . . . . . . . . . . . . . .13