Bosch Sensort ec BHI160 Shuttle Board GENERAL DESCRIPTION The Bosch Sensortec BHI160 shuttle board is a PCB with the BHI160 Smart Sensor Hub mounted on it. Additionally, it includes up to four external magnetometers, an AKM09911, AKM09912, BMM150, and a YAS532 which can be connected to the BHI160 using the available jumpers on the PCB. All magnetic sensors are enabled by default (Jumper J15 can be used to switch off the power supply of individual sensors, in case this is needed). Additional sensors can be attached to the shuttle board, using the TFR-Card connector interface (J10) provided on the board, next to the jumpers. The shuttle board allows easy access to the sensor's pins via a simple socket. As all Bosch Sensortec sensor shuttle boards have identical footprint, they can be plugged into Bosch Sensortec's advanced development tools (e.g. the Development Board or Application Board). Shuttle board outline dimensions (all dimensions in mm) Note: Product photo may differ from real product's appearance. Bosch Sensort ec | BHI160 2|3 BHI160 shuttle board schematic BHI160 shuttle board layout - placement Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves al l ri ghts in the event of i ndustrial property ri ghts. We reserve al l rights of disposal such as copyi ng and passing on to third parti es. BOSCH and the symbol s are registered trademarks of Robert Bosch GmbH, Germany. Doc.-Number: BST-DHW-FLO23-01 / Version_1.0_290615 Bosch Sensort ec | BHI160 3|3 TFR Card Extension Interface DELIVERABLES Pin Pin No. Name Description 1 VDD Analog power supply voltage (1.6 V ... 3.3 V) 2 VDDIO 3 SDA 4 GND 5 SCK 6 ASCK BHI160 shuttle board Digital I/O power supply voltage (1.6 V ... 3.3 V) I2 C serial data (Host interface) Analog power supply ground I2 C serial clock (Host interface) I2 C Master serial clock, for connection of external sensors I2 C Master serial data, 7 ASDA for connection of external sensors 8 INT Host interrupt Headquarters Bosch Sensortec GmbH Gerhard-Ki ndler-Strasse 9 72770 Reutl i ngen * Germany Tel ephone +49 7121 3535 900 Fax +49 7121 3535 909 www.bosch -sensortec.com Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves al l ri ghts in the event of i ndustrial property ri ghts. We reserve al l rights of disposal such as copyi ng and passing on to third parti es. BOSCH and the symbol s are registered trademarks of Robert Bosch GmbH, Germany. Doc.-Number: BST-DHW-FLO23-01 / Version_1.0_290615