https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/4 A Product Description STEP POWER power supplies for distribution boards The STEP POWER power supply range was developed especially for building automation. The low idling losses and high degree of efficiency ensure maximum energy efficiency. They allow flexible use and can be snapped onto the DIN rail or screwed onto an even surface. Your advantages Flexible mounting by simply snapping onto the DIN rail or screwing onto a level surface Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve Energy savings thanks to maximum energy efficiency and incredibly low idling losses Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356308540 Weight per Piece (excluding packing) 300.000 g Custom tariff number 85044030 Country of origin Poland Technical data Dimensions Width 72 mm Height 90 mm Depth 61 mm 04/20/2021Page1/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Technical data Dimensions 55 mm (Device depth (DIN rail mounting)) Installation distance right/left 0 mm / 0 mm Installation distance top/bottom 30 mm / 30 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 C ... 70 C (> 55 C derating : 2.5%/K) Ambient temperature (storage/transport) -40 C ... 85 C Max. permissible relative humidity (operation) 95 % (at 25 C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Input data Nominal input voltage range 100 VAC ... 240 VAC Input voltage range 85 VAC ... 264 VAC 95 VDC ... 250 VDC AC frequency range 45 Hz ... 65 Hz Frequency range DC 0 Hz Current consumption 0.8 A (120VAC) 0.5 A (230 V AC) Nominal power consumption 118.1 VA Inrush current < 15 A (typical) Mains buffering time typ. 27 ms (120VAC) typ. 120 ms (230 V AC) Input fuse 3.15 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Power factor (cos phi) 0.58 Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 15 VDC 1% Setting range of the output voltage (USet) 10 VDC ... 16.5 VDC (> 15 VDC, constant capacity restricted) Nominal output current (IN) 4 A (-25C...55C) 4.4 A (-25C...40C permanent ) Output current Imax 9A Derating 55 C ... 70 C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes 04/20/2021Page2/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Technical data Output data Feedback voltage resistance 25 VDC Protection against overvoltage at the output (OVP) < 25 VDC Control deviation < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage 10 %) Residual ripple < 55 mVPP (20MHz) Output power 60 W Typical response time < 0.5 s Peak switching voltages nominal load < 10 mVPP (20MHz) Maximum power dissipation in no-load condition < 0.5 W Power loss nominal load max. 8.6 W General Net weight 0.27 kg Operating voltage display Green LED Efficiency > 87 % (for 230 V AC and nominal values) > 1134000 h (40C) Insulation voltage input/output 4 kV AC (type test) 3.75 kV AC (routine test) Insulation voltage input / PE 3.5 kV AC (type test) 2 kV AC (routine test) Insulation voltage output / PE 500 VDC (routine test) Degree of protection IP20 Protection class II (in closed control cabinet) Housing material Polycarbonate Foot latch material POM (Polyoxymethylen) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: 0mm horizontally, 30mm vertically Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 6.5 mm 04/20/2021Page3/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Technical data Connection data, input Screw thread M3 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 6.5 mm Screw thread M3 Standards EMC requirements for noise immunity EN61000-6-1 EN61000-6-2 EMC requirements for noise emission EN61000-6-3 EN61000-6-4 Standard - Safety of transformers EN61558-2-16 Standard - Electrical safety IEC60950-1/VDE0805 (SELV) Standard - Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN50178/VDE0160 (PELV) Standard - Safety extra-low voltage IEC60950-1 (SELV) and EN60204-1 (PELV) Standard - Safe isolation DINVDE0100-410 Standard - Protection against shock currents, basic requirements for protective separation in electrical equipment EN50178 Standard - Limitation of mains harmonic currents EN61000-3-2 Rail applications EN50121-4 Conformance/approvals UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T3C (Hazardous Location) CSA CSA-C22.2 No.107.1-01 Shipbuilding approval DNVGL(EMCB)ABS, NK EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC 04/20/2021Page4/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Technical data EMC data Electrostatic discharge EN 61000-4-2 Contact discharge 6 kV (Test Level 3) Discharge in air 8 kV (Test Level 3) Electromagnetic HF field EN61000-4-3 Frequency range 80 MHz ... 1 GHz Test field strength 10 V/m Frequency range 1 GHz ... 2 GHz Test field strength 10 V/m Frequency range 2 GHz ... 3 GHz Test field strength 10 V/m Comments Criterion A Fast transients (burst) EN61000-4-4 Input 4 kV (Test Level 4 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Comments Criterion B Surge voltage load (surge) EN61000-4-5 Input 2 kV (Test Level 3 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output 1 kV (Test Level 2 - symmetrical) 0.5 kV (Test Level 1 - asymmetrical) Comments Criterion B Conducted interference EN61000-4-6 Frequency range 10 kHz ... 15 kHz 0.15 MHz ... 80 MHz Voltage 3 V (Test Level 2) 10 V (Test Level 3) Comments Criterion A Criterion A Voltage dips EN61000-4-11 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 04/20/2021Page5/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Block diagram L (+) N (-) Schematic diagram + + - - Ou 12 tput V DC 5A /5 12DC 1AC/ 3 -PS/ 6858 STEP o.: 28 r-N Orde T 0V INPU 0-24 10 0Hz -6 : AC 50 0.65A : 1.4 ltage l Vo ~ iona 64V erat 85-2 V Op 50 95-2 T PU OUT V 12 : 5A RE DC TU RA MPE .+70C TE -25.. 58F .+1 -15.. -26 1F >+13 /k) 5C/ (>+5 :2,5% LS ing Derat ROVA ustrial Indntrol nt APP Co me Equip 43KA tion ma y Infor nolog Tech ment Equip UL D TE LIS No. nual ma before ins t.com Read813 g to ma ontac 9038ectin enixc conn e.pho erfac w.int ww Classifications eCl@ss eCl@ss 10.0.1 27040701 eCl@ss 11.0 27040701 eCl@ss 4.0 27040700 eCl@ss 4.1 27040700 eCl@ss 5.0 27242200 eCl@ss 5.1 27242200 eCl@ss 6.0 27049000 eCl@ss 7.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC002540 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 UNSPSC 18.0 39121004 UNSPSC 19.0 39121004 UNSPSC 20.0 39121004 04/20/2021Page6/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Classifications UNSPSC UNSPSC 21.0 39121004 Approvals Approvals Approvals DNV GL / NK / ABS / UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details DNV GL https://approvalfinder.dnvgl.com/ TAA00001YD NK http://www.classnk.or.jp/hp/en/ 09A024 http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1797199_PDA ABS UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596 04/20/2021Page7/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Approvals IECEE CB Scheme http://www.iecee.org/ DK-14416-M1 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528 EAC EAC-Zulassung EAC RU*DE*08.B.01873/19 cULus Recognized cULus Listed Accessories Accessories Device protection Type 3 surge protection device-PLT-SEC-T3-230-FM-UT-2907919 Type2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230VAC/DC 04/20/2021Page8/9 https://www.phoenixcontact.com/us/products/2868619 Power supply unit-STEP-PS/ 1AC/15DC/4-2868619 Accessories Type 3 surge protection device-PLT-SEC-T3-24-FM-UT-2907916 Type3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24VAC/DC Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 04/20/2021Page9/9