STEP-PS/ 1AC/15DC/4 - PHOENIX CONTACT

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page1/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 15 V DC/4 A

Product Description

STEP POWER power supplies for distribution boards

The STEP POWER power supply range was developed especially for building automation. The low idling losses and high degree of efficiency ensure

maximum energy efficiency. They allow flexible use and can be snapped onto the DIN rail or screwed onto an even surface.

Your advantages

Flexible mounting by simply snapping onto the DIN rail or screwing onto a level surface

Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve

Energy savings thanks to maximum energy efficiency and incredibly low idling losses

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4046356308540

Weight per Piece (excluding packing) 300.000 g

Custom tariff number 85044030

Country of origin Poland

Technical data

Dimensions

Width 72 mm

Height 90 mm

Depth 61 mm

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page2/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Technical data

Dimensions

55 mm (Device depth (DIN rail mounting))

Installation distance right/left 0 mm / 0 mm

Installation distance top/bottom 30 mm / 30 mm

Ambient conditions

Degree of protection IP20

Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K)

Ambient temperature (storage/transport) -40 °C ... 85 °C

Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)

Climatic class 3K3 (in acc. with EN 60721)

Degree of pollution 2

Input data

Nominal input voltage range 100 VAC ... 240 VAC

Input voltage range 85 VAC ... 264 VAC

95 VDC ... 250 VDC

AC frequency range 45 Hz ... 65 Hz

Frequency range DC 0 Hz

Current consumption 0.8 A (120VAC)

0.5 A (230 V AC)

Nominal power consumption 118.1 VA

Inrush current < 15 A (typical)

Mains buffering time typ. 27 ms (120VAC)

typ. 120 ms (230 V AC)

Input fuse 3.15 A (slow-blow, internal)

Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K)

Power factor (cos phi) 0.58

Type of protection Transient surge protection

Protective circuit/component Varistor

Output data

Nominal output voltage 15 VDC ±1%

Setting range of the output voltage (USet)10 VDC ... 16.5 VDC (> 15 VDC, constant capacity restricted)

Nominal output current (IN)4 A (-25°C...55°C)

4.4 A (-25°C...40°C permanent )

Output current Imax 9 A

Derating 55 °C ... 70 °C (2.5%/K)

Connection in parallel Yes, for redundancy and increased capacity

Connection in series yes

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page3/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Technical data

Output data

Feedback voltage resistance ≤ 25 VDC

Protection against overvoltage at the output (OVP) < 25 VDC

Control deviation < 1 % (change in load, static 10 % ... 90 %)

< 2 % (change in load, dynamic 10 % ... 90 %)

< 0.1 % (change in input voltage ±10 %)

Residual ripple < 55 mVPP (20MHz)

Output power 60 W

Typical response time < 0.5 s

Peak switching voltages nominal load < 10 mVPP (20MHz)

Maximum power dissipation in no-load condition < 0.5 W

Power loss nominal load max. 8.6 W

General

Net weight 0.27 kg

Operating voltage display Green LED

Efficiency > 87 % (for 230 V AC and nominal values)

> 1134000 h (40°C)

Insulation voltage input/output 4 kV AC (type test)

3.75 kV AC (routine test)

Insulation voltage input / PE 3.5 kV AC (type test)

2 kV AC (routine test)

Insulation voltage output / PE 500 VDC (routine test)

Degree of protection IP20

Protection class II (in closed control cabinet)

Housing material Polycarbonate

Foot latch material POM (Polyoxymethylen)

Mounting position horizontal DIN rail NS 35, EN 60715

Assembly instructions alignable: 0mm horizontally, 30mm vertically

Connection data, input

Connection method Screw connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 2.5 mm²

Conductor cross section AWG min. 24

Conductor cross section AWG max. 12

Stripping length 6.5 mm

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page4/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Technical data

Connection data, input

Screw thread M3

Connection data, output

Connection method Screw connection

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 2.5 mm²

Conductor cross section AWG min. 24

Conductor cross section AWG max. 12

Stripping length 6.5 mm

Screw thread M3

Standards

EMC requirements for noise immunity EN61000-6-1

EN61000-6-2

EMC requirements for noise emission EN61000-6-3

EN61000-6-4

Standard - Safety of transformers EN61558-2-16

Standard - Electrical safety IEC60950-1/VDE0805 (SELV)

Standard – Electronic equipment for use in electrical power installations

and their assembly into electrical power installations EN50178/VDE0160 (PELV)

Standard – Safety extra-low voltage IEC60950-1 (SELV) and EN60204-1 (PELV)

Standard - Safe isolation DINVDE0100-410

Standard – Protection against shock currents, basic requirements for

protective separation in electrical equipment EN50178

Standard – Limitation of mains harmonic currents EN61000-3-2

Rail applications EN50121-4

Conformance/approvals

UL approvals UL/C-UL listed UL 508

UL/C-UL Recognized UL 60950-1

UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T3C

(Hazardous Location)

CSA CSA-C22.2 No.107.1-01

Shipbuilding approval DNVGL(EMCB)ABS, NK

EMC data

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU

Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page5/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Technical data

EMC data

Electrostatic discharge EN 61000-4-2

Contact discharge 6 kV (Test Level 3)

Discharge in air 8 kV (Test Level 3)

Electromagnetic HF field EN61000-4-3

Frequency range 80 MHz ... 1 GHz

Test field strength 10 V/m

Frequency range 1 GHz ... 2 GHz

Test field strength 10 V/m

Frequency range 2 GHz ... 3 GHz

Test field strength 10 V/m

Comments Criterion A

Fast transients (burst) EN61000-4-4

Input 4 kV (Test Level 4 - asymmetrical)

Output 2 kV (Test Level 3 - asymmetrical)

Comments Criterion B

Surge voltage load (surge) EN61000-4-5

Input 2 kV (Test Level 3 - symmetrical)

4 kV (Test Level 4 - asymmetrical)

Output 1 kV (Test Level 2 - symmetrical)

0.5 kV (Test Level 1 - asymmetrical)

Comments Criterion B

Conducted interference EN61000-4-6

Frequency range 10 kHz ... 15 kHz

0.15 MHz ... 80 MHz

Voltage 3 V (Test Level 2)

10 V (Test Level 3)

Comments Criterion A

Criterion A

Voltage dips EN61000-4-11

Environmental Product Compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 25;

For details about hazardous substances go to tab “Downloads”, Category

“Manufacturer's declaration”

Drawings

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page6/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Block diagram

N(-)

L (+)

–

Schematic diagram

OutputDC

12V 5A

STEP-PS/1AC/12DC/5

Order-No.:2868583

100-240V

85-264V~

-25...+70°C

Industrial

Information

ReadmanualNo.

9038813before

connectingtomains

www.interface.phoenixcontact.com

Control

Technology

Equipment

43KA

(>+55°C/>+131°F

Derating:2,5%/k)

-15...+158°F

95-250V

12V

50-60Hz

1.4-0.65A

INPUT

OUTPUT

TEMPERATURE

APPROVALS

AC:

DC:

OperationalVoltage:

LISTED

-26

Classifications

eCl@ss

eCl@ss 10.0.1 27040701

eCl@ss 11.0 27040701

eCl@ss 4.0 27040700

eCl@ss 4.1 27040700

eCl@ss 5.0 27242200

eCl@ss 5.1 27242200

eCl@ss 6.0 27049000

eCl@ss 7.0 27049002

eCl@ss 9.0 27040701

ETIM

ETIM 2.0 EC001039

ETIM 3.0 EC001039

ETIM 4.0 EC002540

ETIM 6.0 EC002540

ETIM 7.0 EC002540

UNSPSC

UNSPSC 6.01 30211502

UNSPSC 7.0901 39121004

UNSPSC 11 39121004

UNSPSC 12.01 39121004

UNSPSC 13.2 39121004

UNSPSC 18.0 39121004

UNSPSC 19.0 39121004

UNSPSC 20.0 39121004

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page7/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Classifications

UNSPSC

UNSPSC 21.0 39121004

Approvals

DNV GL / NK / ABS / UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed

Ex Approvals

UL Listed / cUL Listed / cULus Listed

Approval details

DNV GL https://approvalfinder.dnvgl.com/ TAA00001YD

NK http://www.classnk.or.jp/hp/en/ 09A024

ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1797199_PDA

UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528

UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596

cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596

https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page8/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Approvals

IECEE CB Scheme http://www.iecee.org/ DK-14416-M1

cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528

EAC  EAC-Zulassung

EAC  RU*DE*08.B.01873/19

cULus Recognized  

cULus Listed  

Accessories

Device protection

Type 3 surge protection device-PLT-SEC-T3-230-FM-UT-2907919

Type2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power

supply network with integrated status indicator and remote signaling. Nominal voltage: 230VAC/DC



https://www.phoenixcontact.com/us/products/2868619

04/20/2021Page9/9

Power supply unit-STEP-PS/ 1AC/15DC/4-2868619

Accessories

Type 3 surge protection device-PLT-SEC-T3-24-FM-UT-2907916

Type3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote

signaling for single-phase power supply networks. Nominal voltage: 24VAC/DC



http://www.phoenixcontact.com