STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 N-channel 800 V, 3.5 typ., 2 A Zener-protected SuperMESHTM 5 Power MOSFET in DPAK, TO-220FP, TO-220 and IPAK packages Datasheet - production data Features TAB Order codes VDS RDS(on)max ID PTOT 3 STD2N80K5 1 DPAK 2 1 3 800 V 20 W 4.5 2A 45 W TO-220FP STU2N80K5 TAB * TO-220 worldwide best RDS(on) * Worldwide best FOM (figure of merit) 3 3 2 2 1 * Ultra low gate charge IPAK TO-220 STF2N80K5 STP2N80K5 TAB 1 45 W * 100% avalanche tested Figure 1. Internal schematic diagram D(2, TAB) * Zener-protected Applications * Switching applications Description G(1) S(3) AM01476v1 These devices are N-channel Power MOSFETs developed using SuperMESHTM 5 technology. This revolutionary, avalanche-rugged, high voltage Power MOSFET technology is based on an innovative proprietary vertical structure. The result is a drastic reduction in on-resistance and ultra low gate charge for applications which require superior power density and high efficiency. Table 1. Device summary Order codes Marking Package Packaging DPAK Tape and reel STD2N80K5 STF2N80K5 TO-220FP 2N80K5 STP2N80K5 TO-220 STU2N80K5 IPAK February 2014 This is information on a product in full production. DocID024993 Rev 2 Tube 1/23 www.st.com 23 Contents STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2/23 .............................................. 9 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol DPAK, Parameter Unit TO-220FP TO-220, IPAK Gate- source voltage 30 V ID Drain current (continuous) at TC = 25 C 2(1) A ID Drain current (continuous) at TC = 100 C 1.3 A 8 A VGS IDM (2) Drain current (pulsed) PTOT Total dissipation at TC = 25 C 45 20 W IAR Max current during repetitive or single pulse avalanche (pulse width limited by Tjmax) 0.5 A EAS Single pulse avalanche energy (starting TJ = 25 C, ID=IAS, VDD= 50 V) 60.5 mJ Peak diode recovery voltage slope 4.5 V/ns MOSFET dv/dt ruggedness 50 V/ns dv/dt (3) dv/dt (4) Tj Operating junction temperature C -55 to 150 Tstg Storage temperature C 1. For TO-220FP limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD 2 A, di/dt 100 A/s, peak VDS V(BR)DSS 4. VDS 640 V Table 3. Thermal data Value Symbol Parameter Unit DPAK TO-220FP TO-220 IPAK Thermal resistance junction-case 2.78 Rthj-pcb Thermal resistance junction-pcb 50(1) Rthj-amb Thermal resistance junction-amb Rthj-case 6.25 2.78 2.78 C/W 62.5 100 1. When mounted on FR-4 board of 1 inch, 2 oz Cu. DocID024993 Rev 2 3/23 Electrical characteristics 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Electrical characteristics (TCASE = 25 C unless otherwise specified). Table 4. On/off states Symbol V(BR)DSS Parameter Test conditions Drain-source breakdown voltage (VGS= 0) ID = 1 mA Min. Typ. Max. 800 Unit V VDS = 800 V 1 A VDS = 800 V Tj=125 C 50 A Gate body leakage current (VDS = 0) VGS = 20 V 10 A VGS(th) Gate threshold voltage VDS = VGS, ID = 100 A 4 5 V RDS(on) Static drain-source onresistance VGS = 10 V, ID= 1 A 3.5 4.5 Min. Typ. Max. Unit - 105 - pF - 8 - pF IDSS IGSS Zero gate voltage drain current (VGS = 0) 3 Table 5. Dynamic Symbol Parameter Test conditions Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance - 0.5 - pF Co(tr)(1) Equivalent capacitance time related - 16 - pF Co(er)(2) Equivalent capacitance energy related - 7 - pF RG Intrinsic gate resistance - 18 - Qg Total gate charge - 9.5 - nC - 1.5 - nC - 7.5 - nC VDS =100 V, f=1 MHz, VGS=0 VGS = 0, VDS = 0 to 640 V Qgs Gate-source charge Qgd Gate-drain charge f = 1 MHz, ID=0 VDD = 640 V, ID = 2 A VGS =10 V 1. Time related is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 2. Energy related is defined as a constant equivalent capacitance giving the same stored energy as Coss when VDS increases from 0 to 80% VDSS 4/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Electrical characteristics Table 6. Switching times Symbol td(on) tr Parameter Test conditions Turn-on delay time Rise time td(off) tf VDD = 400 V, ID = 1 A, RG=4.7 , VGS=10 V Turn-off delay time Fall time Min. Typ. Max. Unit - 8 - ns - 12 - ns - 19 - ns - 32 - ns Min. Typ. Max. Unit Table 7. Source drain diode Symbol Test conditions Source-drain current - 2 A (1) Source-drain current (pulsed) - 8 A (2) Forward on voltage - 1.5 V ISD ISDM VSD Parameter trr ISD= 2 A, VGS=0 Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current trr Reverse recovery time Qrr Reverse recovery charge IRRM Reverse recovery current ISD= 2 A, VDD= 60 V di/dt = 100 A/s, ISD= 2 A,VDD= 60 V di/dt=100 A/s, Tj=150 C - 255 ns - 1 C - 8 A - 285 ns - 1.45 C - 7.5 A Min. Typ. Max. Unit 30 - - V 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% Table 8. Gate-source Zener diode Symbol Parameter Test conditions V(BR)GSO Gate-source breakdown voltage IGS= 1mA, ID= 0 The built-in back-to-back Zener diodes have been specifically designed to enhance not only the device's ESD capability, but also to make them capable of safely absorbing any voltage transients that may occasionally be applied from gate to source. In this respect, the Zener voltage is appropriate to achieve efficient and cost-effective protection of device integrity. The integrated Zener diodes thus eliminate the need for external components. DocID024993 Rev 2 5/23 Electrical characteristics 2.1 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Electrical characteristics (curves) Figure 2. Safe operating area for DPAK and IPAK Figure 3. Thermal impedance for DPAK and IPAK AM18072v1 ID (A) 10 1 e ar a 10ms is S is t h RD x in n ma o ti by ra pe ed O mit i L n (o ) 100s 1ms 10ms 0.1 Tj=150C Tc=25C Single pulse 0.01 0.1 1 10 100 VDS(V) Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP AM18073v1 ID (A) 10 1 10s is ea ) a r S(on D t R x in n ma tio by a r pe ed O mit Li s hi 100s 1ms 10ms 0.1 Tj=150C Tc=25C Single pulse 0.01 0.1 1 10 100 VDS(V) Figure 6. Safe operating area for TO-220 Figure 7. Thermal impedance for TO-220 AM18074v1 ID (A) 10s ai (o n) s 100s DS Op Lim era ite tion d b in y m this ax ar R e 1 1ms 10ms 0.1 Tj=150C Tc=25C Single pulse 0.01 0.1 6/23 1 10 100 VDS(V) DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Figure 8. Output characteristics Figure 9. Transfer characteristics AM18075v1 ID (A) Electrical characteristics VGS=10, 11V AM18085v1 ID (A) VDS=20V 3.0 3 2.5 9V 2.5 2.0 2 1.5 1.5 8V 1.0 1 0.5 7V 0.5 6V 0.0 0 2 4 8 6 0 5 12 14 16 VDS(V) 10 Figure 10. Gate charge vs gate-source voltage AM18076v1 VDS VGS (V) VDS 10 500 5 8 400 4 6 300 3 4 200 2 2 100 1 4 6 8 10 VGS(V) VGS=10V 0 0.0 0.4 0.8 1.2 1.6 ID(A) Figure 13. Output capacitance stored energy AM18078v1 C (pF) 9 AM18077v1 6 0 Qg(nC) Figure 12. Capacitance variations 8 RDS(on) () (V) 600 2 7 Figure 11. Static drain-source on-resistance 12 0 0 6 AM18079v1 Eoss (J) 100 100 Ciss 2 10 Coss Crss 1 0.1 0.1 1 10 100 VDS(V) DocID024993 Rev 2 0 0 200 400 600 800 VDS(V) 7/23 Electrical characteristics STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on-resistance vs temperature AM18082v1 VGS(th) AM18081v1 RDS(on) (norm) (norm) ID=100 A 1.2 ID=1 A VGS=10 V 2.5 1.1 1 2 0.9 0.8 1.5 0.7 1 0.6 0.5 0.5 0.4 -100 -50 0 50 100 0 -100 150 TJ(C) Figure 16. Normalized VDS vs temperature 0 100 50 150 AM18084v1 VSD(V) TJ=-50C ID=1mA 1.1 1 1.05 0.9 1 0.8 0.95 0.7 0.9 0.6 0.85 -100 TJ=25C TJ=150C 0.5 -50 50 0 100 TJ(C) Figure 18. Maximum avalanche energy vs starting TJ AM18086v1 EAS (mJ) 60 50 40 30 20 10 0 0 TJ(C) Figure 17. Source-drain diode forward characteristics AM18083v1 VDS (norm) 8/23 -50 20 40 60 80 100 120 140 TJ(C) DocID024993 Rev 2 0 0.5 1 1.5 2 ISD(A) STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 3 Test circuits Test circuits Figure 19. Switching times test circuit for resistive load Figure 20. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F IG=CONST VDD VGS 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01468v1 Figure 21. Test circuit for inductive load switching and diode recovery times A A AM01469v1 Figure 22. Unclamped inductive load test circuit L A D G D.U.T. FAST DIODE B B VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 23. Unclamped inductive waveform Figure 24. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 DocID024993 Rev 2 10% AM01473v1 9/23 Package mechanical data 4 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 10/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data Figure 25. DPAK (TO-252) type A drawing 0068772_M_type_A DocID024993 Rev 2 11/23 Package mechanical data STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Table 9. DPAK (TO-252) type A mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.80 L2 0.80 L4 0.60 1.00 R V2 12/23 Max. 0.20 0 8 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data Figure 26. DPAK (TO-252) type A footprint (a) Footprint_REV_M_type_A a. All dimensions are in millimeters DocID024993 Rev 2 13/23 Package mechanical data STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Figure 27. TO-220FP drawing 7012510_Rev_K_B 14/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data Table 10. TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID024993 Rev 2 15/23 Package mechanical data STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Figure 28. TO-220 drawing BW\SH$B5HYB7 16/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data Table 11. TO-220 mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 DocID024993 Rev 2 17/23 Package mechanical data STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Figure 29. IPAK (TO-251) drawing 0068771_K 18/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Package mechanical data Table 12. IPAK (TO-251) mechanical data mm. DIM min. typ. max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10 DocID024993 Rev 2 1.00 19/23 Packaging information 5 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Packaging information Figure 30. Tape for DPAK 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 20/23 DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Packaging information Figure 31. Reel for DPAK T REEL DIMENSIONS 40mm min. Access hole At slot location B D C N A Full radius G measured at hub Tape slot in core for tape start 25 mm min. width AM08851v2 Table 13. DPAK tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID024993 Rev 2 18.4 22.4 21/23 Revision history 6 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Revision history Table 14. Document revision history Date Revision 11-Jul-2013 1 First release. 2 - - - - - - - - 18-Feb-2014 22/23 Changes Added: IPAK package Modified: EAS value in Table 2 Modified: Rthj-case in Table 3 Modified: typical values in Table 5, 6 and 7 Added: Section 2.1: Electrical characteristics (curves) Updated: Figure 25, 26 and Table 9 Added: Table 12 and Figure 29 Minor text changes DocID024993 Rev 2 STD2N80K5, STF2N80K5, STP2N80K5, STU2N80K5 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID024993 Rev 2 23/23 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STD2N80K5 STP2N80K5 STF2N80K5 STU2N80K5