0705 Thin Film Chip Resistor Standard Grade, Surface Mount, Solderable PROTECTIVE ENCAPSULANT FEATURES PRECISION THIN FILM RESISTOR 99.6% ALUMINA CHIP WRAPAROUND TERMINATIONS PRETINNED * Tolerances to 0.1% * Operating temperature range : -55 C to +150 C * Pretinned (Sn60) nickel barrier terminations * TCR's to 25 ppm * Made with the same materials and process as our MIL-PRF-55342 "S" level qualified chips * Suitable for solder reflow, vapor phase, or wave solder attachment PERFORMANCE CHARACTERISTICS Resistance Range (1) Tolerances (2) Maximum Power Maximum Voltage 5W-1MW 0.1%, 0.25%, 0.5%, 1%, 2%, 5%, 10% 200 mW 50 Volts CURRENT NOISE POWER DISSIPATION ENVIRONMENTAL PERFORMANCE (3) TCR (-55 to +125 C in ppm/C) Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life < 25 ppm 0.02% 0.02% 0.02% 0.02% 0.03% 0.03% See Chart TYPICAL LIFE TEST PERFORMANCE POWER DERATING (1) Minimum resistance range at 0.1% tolerance is 100 ohms. (2) 0.05% in limited availability - consult factory (3) Typical resistance change, the maximum is the same as MIL-PRF-55342. Test methods are per MIL-PRF-55342. PART NUMBERING MECHANICAL S0705CA 150 J H B TCR E: 25 ppm H: 50 ppm K: 100 ppm TOLERANCES B: 0.1% C: 0.25% D: 0.5% F: 1% G: 2% J: 5% K: 10% M: 20% RESISTANCE VALUE Three or four digits are used with all leading digits significant. Four digits are used for 1% tolerance or lower, otherwise three digits are used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. Length Width Thickness Top Term. Bottom Term. INCHES .075 (+.010/-.001) .050 (+.005/-.005) .015 - .020 .010 - .020 .010 - .025 MM 1.91 (+.25/-.03) 1.27 (+.13/-.13) .38 - .51 .25 - .51 .25 - .64 Approx. Weight .0045 grams Solderability: Solder coating compatible with Sn60, 62 or 63 solders, provides good wetting with all types of solder attachment. All product is tested IAW Mil-Std-202, method 208, including 8 hour steam aging. OPTIONS PACKAGING Three packaging options are available: * Bulk Packaging - (5000 per Bag Max.) * Waffle Pack - (170 per Tray Max.) * Tape & Reel - (5000 per Reel Max.) SOTA offers a full line of component parts in the 0705 size including Military (MIL-PRF-55342 "S" level) and HighReliability (customer specified testing). Available options are epoxy bondable and wire bondable terminations, custom part marking, and untrimmed resistors. STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 Where Quality Isn't a Goal...It's Our Tradition 02/01/98