0705 Thin Film Chip Resistor
Standard Grade, Surface Mount, Solderable
STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401
Where Quality Isn't a Goal...It's Our Tradition
Three packaging options are available:
• Bulk Packaging - (5000 per Bag Max.)
• Waffle Pack - (170 per Tray Max.)
• Tape & Reel - (5000 per Reel Max.)
PACKAGING
PERFORMANCE CHARACTERISTICS
(1) Minimum resistance range at 0.1% tolerance is 100 ohms.
(2) ±0.05% in limited availability - consult factory
(3) Typical resistance change, the maximum is the same
as MIL-PRF-55342. Test methods are per MIL-PRF-55342.
Resistance Range (1)
Tolerances (2)
Maximum Power
Maximum Voltage
5W-1MW
0.1%, 0.25%, 0.5%, 1%, 2%, 5%, 10%
200 mW
50 Volts
PART NUMBERING
TCR
E: ±25 ppm H: ±50 ppm K: ±100 ppm
S0705CA 150 J H B
TOLERANCES
B: 0.1% C: 0.25% D: 0.5% F: 1% G: 2% J: 5% K: 10% M: 20%
RESISTANCE VALUE
Three or four digits are used with all leading digits significant. Four digits
are used for 1% tolerance or lower, otherwise three digits are used. The last
digit specifies the number of zeros to add. The letter "R" is used to
represent the decimal for fractional ohmic values. Example: 5R6 is 5.6
ohms.
MECHANICAL
Length
Width
Thickness
Top Term.
Bottom Term.
Approx. Weight
INCHES
.075 (+.010/-.001)
.050 (+.005/-.005)
.015 - .020
.010 - .020
.010 - .025
.0045 grams
MM
1.91 (+.25/-.03)
1.27 (+.13/-.13)
.38 - .51
.25 - .51
.25 - .64
POWER DERATING
CURRENT NOISE
TYPICAL LIFE TEST PERFORMANCE
POWER DISSIPATION
• TCR's to ± 25 ppm
• Made with the same materials and
process as our MIL-PRF-55342 "S"
level qualified chips
• Suitable for solder reflow, vapor
phase, or wave solder attachment
FEATURES
• Tolerances to ± 0.1%
• Operating temperature range :
-55 C to +150 C
• Pretinned (Sn60) nickel barrier
terminations
°°
Solderability: Solder coating compatible with Sn60, 62 or
63 solders, provides good wetting with all types of solder
attachment. All product is tested IAW Mil-Std-202,
method 208, including 8 hour steam aging.
SOTA offers a full line of component parts in the 0705 size
including Military (MIL-PRF-55342 "S" level) and High-
Reliability (customer specified testing). Available options
are epoxy bondable and wire bondable terminations,
custom part marking, and untrimmed resistors.
OPTIONS
<25ppm
±0.02%
±0.02%
±0.02%
±0.02%
±0.03%
±0.03%
See Chart
ENVIRONMENTAL PERFORMANCE (3)
TCR (-55 to +125 C in ppm/ C)
Thermal Shock
Low Temperature Operation
Short-time Overload
Resistance to Bonding Exposure
Moisture Resistance
High Temperature Exposure
Life
°°
02/01/98
PROTECTIVE
ENCAPSULANT
WRAPAROUND
TERMINATIONS
PRETINNED
99.6% ALUMINA CHIP
PRECISION
THIN FILM
RESISTOR
