T11-811 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Circuit Breaker for Equipment thermal, Drop-in type, Reset type, Quick connect terminals See below: Approvals and Compliances Description - Applications Drop-in type Thermal circuit breaker 1pole Reset type Quick connect terminals 6.3 x 0.8 mm - Weblinks Unique Selling Proposition - Power tools Household Equipment Power supplies and chargers Industrial appliances pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Product News Compact design Positively trip-free release Available with cover Different mounting possibilities Technical Data Rated Voltage AC Rated Voltage DC Rated current range AC Conditional short circuit capacity Short circuit capacity Icn Degree of Protection Dielectric Strength Insulation Resistance Endurance typical Endurance minimum AC 240 V: 50/60 Hz 48 V 0.05 - 16 A IEC: Inc, PC1, AC 240 V: 2 kA at In < 6.5 A/240 VAC : 8 x In at In 6.5 A/240 VAC : 96 A from front side IP40 acc. to IEC 60529 50 Hz: > 1.5 kV Impulse 1.2/50 s: > 2.5 kV 500 VDC > 100 M 2 x Ir: 500 switching cycles Reset type AC : 2 x Ir , cos 0.6 : DC : 2 x Ir , L/R = 2 - 3 ms : 50 switching cycles Overload Allowable Operation Temp. Vibration Resistance Shock Resistance Tripping Type Actuation Type Weight IEC: min. 40 trips @ 6 x Ir, cos 0.6 UL / CSA: min. 50 trips @ 1.5 x Ir, cos 0.75 -5 C to 60 C 1.5 mm @ 10 - 60 Hz acc. to IEC 60068-2-6, test Fc 5 G @ 60 - 500 Hz acc. to IEC 60068-2-6, test Fc 100 G / 6 ms acc. to IEC 60068-2-27, test Ea Thermal Reset type ca. 10 g Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T11 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 99759 UL Approvals UL UL File Number: E71572 CCC Approvals CCC CCC Certificate Number: 2012010307564692 Circuit Breakers 1 T11-811 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] T11-811 <7,5A 1 O4 10 T11-811N 3 11 9.2 44 48.2 19 34.5 4 9.0 11.5 9 T11-811 >7,5 A 15.2 6.3 2 Circuit Breakers 2 T11-811 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Diagrams Rated current 7,5 A Shunt terminal T11-...N 6,5 A Rated current >7,5 A 1 1 1 2 3 2 3 Typical internal resistance Rated Current [A] Internal Resistance [] 0.05 380.000 0.50 5.200 1.00 1.350 2.00 0.300 3.00 0.130 4.00 0.080 5.00 0.040 6.00 0.040 7.00 0.020 8.00 0.012 9.00 0.012 10.00 0.011 11.00 0.0095 12.00 0.0095 13.00 0.0085 14.00 0.0085 15.00 0.0075 16.00 0.0075 Time-Current-Curves [ min ] [ sec] 10000 < 6,5 A > 6,5 A 60 30 20 10 2000 1000 500 5 Time in Seconds 200 100 1 50 20 10 5 2 1 0,5 0,3 0,2 0,1 1,05 1,35 2 3 4 5 8 10 Multiple of Rated Current In Reference Temperature +23 Circuit Breakers 3 T11-811 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Effect of ambient temperature The units are calibrated for an ambient temperature of +23C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [C] Correction factor -5 0.87 0 0.90 +10 0.95 +23 1.00 +30 1.04 +40 1.10 +50 1.15 +60 1.20 Example: Rated current = 5 A, Environmental temperature = 40 C, --> Correction factor = 1.1, Resulting current = 5.5 A --> Fount to next higher rated current: 6 A Config. Code T11|-|1|2|3|A|B|-|1.23| The characters are placeholders for the correspondingly keys of selections from the key tables. T11|-| 1 |2|3|A|B|-|1.23| = Mounting Mounting Rated current Configuration key Drop-in type 8 T11|-|1| 2 |3|A|B|-|1.23| = Actuation Type Actuation Type Configuration key Reset type 1 Quick connect terminal 6.3x0.8mm Shunt terminal 0.6 0.7 A 0.7 0.8 A 0.8 0.9 A 0.9 1.0 1 1.3 A 1.3 Configuration key 1.4 A 1.4 1.5 A 1.5 1 1.6 A 1.6 1.7 A 1.7 1.8 A 1.8 1.9 A 1.9 Configuration key 2.0 A 2 2.1 A 2.1 N 2.3 A 2.3 2.5 A 2.5 2.8 A 2.8 R T11|-|1|2|3|A|B|-| 1.23 | = Rated current Rated current 0.5 0.6 A 1.2 Configuration key Setting indication 0.4 0.5 A 1.2 A T11|-|1|2|3|A| B |-|1.23| = Setting indication Setting indication 0.3 0.4 A 1.1 T11|-|1|2|3| A |B|-|1.23| = Shunt terminal Shunt terminal 0.3 A 1.1 A T11|-|1|2| 3 |A|B|-|1.23| = Terminal Terminal Configuration key Configuration key 3.0 A 3 3.3 A 3.3 3.5 A 3.5 4.0 A 4 4.5 A 4.5 5.0 A 5 5.5 A 5.5 6.0 6 0.05 A 0.05 6.5 A 0.1 A 0.1 7.0 A 7 0.15 A 0.15 7.5 A 7.5 0.2 A 0.2 8.0 A 8 8.5 A 8.5 Other rated currents on request Other rated currents on request 4 Circuit Breakers 6.5 T11-811 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Rated current Configuration key Rated current Configuration key 9.0 A 9 13.0 A 13 9.5 A 9.5 14.0 A 14 10.0 A 10 15.0 A 15 11.0 A 11 16.0 A 16 12.0 A 12 Other rated currents on request Other rated currents on request Variants Rated current Construction variants Config. Code Order Number 3.0 A T11-811-3 4400.0112 5.0 A T11-811-5 4400.0114 Shunt terminal Setting indication 5.5 A T11-811-5.5 4400.0120 2.5 A T11-811-2.5 4400.0178 T11-811-6 4400.0179 6.0 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/ Stock-Check-SCHURTER Packaging Unit 100 Pcs Accessories Description 01.05.2019 T-Line Accessories Accessories to T-Line The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Breakers 5