ATS5A Digital Attenuators 5 BIT Applications * EW Systems * Communications Systems * Automatic Gain Control * Test Equipment * Electronic Simulators * Leveling Circuits Specifications: Parameter Specification Units 2.0 - 4.0 GHz Total Attenuation 15.5 dB LSB 0.5 dB MSB 8.0 dB Insertion Loss (Max) 3.1 dB VSWR (Max) 1.6 Ratio Frequency Range (min) Mechanical Specifications: Screening: Case Style: AT Outline Finish: Gold Plate per MIL-G-45204 Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65 C to +100 C, 10 cycles Bias & Control Pins: o0.02" x 0.15" long Connectors: SMA Female per MIL-C-39012 Weight: 19g max Mounting: o0.10" through holes (4) places Hermetically-sealed switches are fine and gross leak checked per MIL-STD-883, Method 1014. Optional High-Rel screening available upon request. Contact the factory to discuss your screening requirements. Additional Electrical Specifications: Environmental Specifications: DC Bias: Switching Speed: Operating RF Power: Attenuation Accuracy: Attenuation Flatness: Logic Control: Designed to meet: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -55C to +85C Storage Temp: -65C to +125C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B +5V 0.5V @ 160mA max 250nsec max(50%TTL-90%RF) 75nsec max (50%TTL-10%RF) 175nsec max (10%RF-90%RF) 25nsec max (90%RF-10%RF) 1W CW max +/-0.4dB (0-20dB attenuation) +/-2%(above 20dB attenuation) +/-0.5dB max TTL 0 = Low Loss TTL 1 = Attenuation Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/acc, email: acc-sales@aeroflex.com Revision Date: 2/23/2011 Outline Drawing: 2.30 2.140 0.080 0.20 0.10 0.08 XXXXX ACC 0.690 0.425 J2 DC: WWYY SN: 0000 GND +5V E5 E4 E3 E2 E1 E6 0.85 J1 SMA FEMALE (2) PLCS. O0.020 X 0.15 LG SOLDER PIN (8) PLCS. O0.100 THRU (4) PLCS. 0.38 (REF) 0.10 (8) PLCS. 0.10 (7) PLCS. 0.80 OUTLINE CASE STYLE AT Part Number E1 E2 E3 E4 E5 E6 ATS5A 0.5dB 1.0dB 2.0dB 4.0dB 8.0dB N/C Part Number Ordering Information: * * * ATxxx: Standard version ATxxx-RC: RoHS-compliant ATxxx-H: Hermetic seal Custom Options - Contact the Factory * * * * * * * * * Gray epoxy paint per MIL-C-22750 Video transient suppression GPO connectors ECL logic input Phase-free Other frequency ranges available from 1MHz to 26GHz Reversed logic Available without SMA connectors for drop-in applications High-rel screening ISO 9001:2008 certified Aeroflex Control Components Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 ACC-sales@aeroflex.com www.aeroflex.com/Microwave www.aeroflex.com/ACC Aeroflex Control Componen. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex Control Components. All rights reserved. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.