40 Industrial Way East, Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212, Fax: (732) 460-0214
www.aeroflex.com/acc, email: acc-sales@aeroflex.com
Parameter Specification Units
Frequency Range (min) 2.0 – 4.0 GHz
Total Attenuation 15.5 dB
LSB 0.5 dB
MSB 8.0 dB
Insertion Loss (Max) 3.1 dB
VSWR (Max) 1.6 Ratio
Specifications:
Applications
• EW Systems
• Communications Systems
• Automatic Gain Control
• Test Equipment
• Electronic Simulators
• Leveling Circuits
Revision Date: 2/23/2011
ATS5A
Digital Attenuators
5 BIT
Mechanical Specifications:
Case Style: AT Outline
Finish: Gold Plate per MIL-G-45204
Bias & Control Pins: ø0.02” x 0.15” long
Connectors: SMA Female per MIL-C-39012
Weight: 19g max
Mounting: ø0.10” through holes
(4) places
Environmental Specifications:
Designed to meet:
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55°C to +85°C
Storage Temp: -65°C to +125°C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Temperature Cycle: MIL-STD-202F, M105C, Cond D
Screening:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Hermetically-sealed switches are fine and gross leak
checked per MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request.
Contact the factory to discuss your screening
requirements.
Additional Electrical Specifications:
DC Bias: +5V ±0.5V @ 160mA max
Switching Speed: 250nsec max(50%TTL-90%RF)
75nsec max (50%TTL-10%RF)
175nsec max (10%RF-90%RF)
25nsec max (90%RF-10%RF)
Operating RF Power: 1W CW max
Attenuation Accuracy: +/-0.4dB (0-20dB attenuation)
+/-2%(above 20dB attenuation)
Attenuation Flatness: +/-0.5dB max
Logic Control: TTL 0 = Low Loss
TTL 1 = Attenuation
Aeroflex Control Componen. reserves the right to make changes to any products and
services herein at any time without notice. Consult Aeroflex or an authorized sales
representative to verify that the information in this data sheet is current before using
this product. Aeroflex does not assume any responsibility or liability arising out of the
application or use of any product or service described herein, except as expressly
agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or
service from Aeroflex convey a license under any patent rights, copyrights, trademark
rights, or any other of the intellectual rights of Aeroflex or of third parties.
Copyright 2011 Aeroflex Control Components. All rights reserved.
www.aeroex.com/Microwave www.aeroex.com/ACC
Aeroflex Control Components
Aeroflex Microelectronic Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Fax: (732) 460-0214
Sales
Phone: (732) 460-0212
ACC-sales@aeroflex.com
ISO 9001:2008 certified
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Outline Drawing:
0.082.140
2.30
0.080
0.6900.85
0.80 0.10
(7) PLCS.
0.38
(REF)
0.20
0.425
0.10
0.10
(8) PLCS.
SMA FEMALE
(2) PLCS.
Ø0.020 X 0.15 LG
SOLDER PIN
(8) PLCS.
Ø0.100 THRU
(4) PLCS.
J1
ACC
XXXXX
GND
J2
+5V
E5
E4
E3
E2
E1
E6
SN:
0000
DC:
WWYY
Part Number Ordering Information:
• ATxxx: Standard version
• ATxxx-RC: RoHS-compliant
• ATxxx-H: Hermetic seal
Custom Options – Contact the Factory
• Gray epoxy paint per MIL-C-22750
• Video transient suppression
• GPO connectors
• ECL logic input
• Phase-free
• Other frequency ranges available from 1MHz to 26GHz
• Reversed logic
• Available without SMA connectors for drop-in applications
• High-rel screening
OUTLINE CASE STYLE AT
Part Number E1 E2 E3 E4 E5 E6
ATS5A 0.5dB 1.0dB 2.0dB 4.0dB 8.0dB N/C