30 * With or without tab terminations * Terminations with tin-lead coating * Q factor 30 at 1 MHz * SRF 8 MHz * L/L 1000 ppm / C * Materials meet UL94-V0 rating * Weight : 0.12 gram 1.5 1.25 1.0 0.85 0.70 0.62 0.55 0.49 0.44 0.41 0.34 0.29 0.20 0.10 29 39 54 73 100 120 150 190 230 270 390 530 1040 3800 * Max permanent DC current at + 125 C. Ambient temperature : - 40 C / + 100 C Storage temperature : - 55 C / + 125 C To Order 3 0.1 0.6 MA4 X 3.3 X 8M AX 1.0 2 "S" Version ### 1 x y Range Inductance value Version Terminations x = G for Gold x = T for Tinned y = S without tab y = A with tab Tel : + 33 (0) 3 82 59 13 33 www.microspire.com 4.40 MAX Output filtering in low power DC / DC conversion Tape and Reel (without tab): 500 pieces ; or Tray : 49 pieces Unreeling 12.0 0.3 4.0 0.1 3.38 MAX Application MPCI H01 ### 1xy 8.00 0.1 MA "A" Version MPCI H01 Packaging 0 1K 3.73 0.38 0.67 1.0 1.5 2.0 2.7 3.4 4.6 5.6 7.1 10.0 12.0 27.0 100.0 1.85 MPCI H01 K38 1xy MPCI H01 K67 1xy MPCI H01 1K0 1xy MPCI H01 1K5 1xy MPCI H01 2K0 1xy MPCI H01 2K7 1xy MPCI H01 3K4 1xy MPCI H01 4K6 1xy MPCI H01 5K6 1xy MPCI H01 7K1 1xy MPCI H01 10K 1xy MPCI H01 12K 1xy MPCI H01 27K 1xy MPCI H01 M10 1xy 4 DCR m 15% 4.14 MAX IDC* Amps .1 Inductance H 15% 4 ID Code TypicalDimensions(mm) 3.3 MAX Electrical Data ( 25C ) 5.50 0.1 .....High Grade Technologies............ .....Power Magnetics............. .....SMD Power High Reliability Inductors............ Miniature Fixed Chip Inductors - H01 Series Specifications may change without prior notice - Revised 07/09 31 Miniature Chip Inductors MSCI H01 MPCI H01 series are usually installed on Military applications and breadboards for Space applications. Since January 2003, Microspire has been manufacturing Radio Frequency Fixed Coils, MPCI H01 series fulfilling ESA ESCC Generic specification N 3201 and detail specification N 3201/008. This range is named MSCI (S for space applications). This qualification approval includes final production tests Chart II, burn-in and electrical measurements to testing level B Chart III and qualification testing Chart IV. For procurement, different quality levels are offered : * Final production tests Chart II * Burn-in and electrical measurements Chart III with level B or C (as required) * Lot acceptance testing Chart V if required Components delivered through this specification need to be processed and inspected in accordance with the Microspire Process Identification Document (P.I.D.). Each component delivered is traceable to its production lot. Microspire Non-QPL ID Code Microspire QPL ID Code ESA SCC Component Part Number MPCI H01 K38 1TS 15 MPCI H01 K67 1TS 15 MPCI H01 1K0 1TS 15 MPCI H01 1K5 1TS 15 MPCI H01 2K0 1TS 15 MPCI H01 2K7 1TS 15 MPCI H01 3K4 1TS 15 MPCI H01 4K6 1TS 15 MPCI H01 5K6 1TS 15 MPCI H01 7K1 1TS 15 MPCI H01 10K 1TS 15 MPCI H01 12K 1TS 15 MPCI H01 27K 1TS 15 MPCI H01 M10 1TS 15 MSCI H01 K38 1TS 15 MSCI H01 K67 1TS 15 MSCI H01 1K0 1TS 15 MSCI H01 1K5 1TS 15 MSCI H01 2K0 1TS 15 MSCI H01 2K7 1TS 15 MSCI H01 3K4 1TS 15 MSCI H01 4K6 1TS 15 MSCI H01 5K6 1TS 15 MSCI H01 7K1 1TS 15 MSCI H01 10K 1TS 15 MSCI H01 12K 1TS 15 MSCI H01 27K 1TS 15 MSCI H01 M10 1TS 15 3201008 05 b L38 L 3201008 05 b L67 L 3201008 05 b 1L0 L 3201008 05 b 1L5 L 3201008 05 b 2L0 L 3201008 05 b 2L7 L 3201008 05 b 3L4 L 3201008 05 b 4L6 L 3201008 05 b 5L6 L 3201008 05 b 7L1 L 3201008 05 b 100 L 3201008 05 b 120 L 3201008 05 b 270 L 3201008 05 b 101 L 05 b L (tolerance) 05 for SnPb Termination b = B for Chart III level B b = C for Chart III level C Tel : + 33 (0) 3 82 59 13 33 www.microspire.com L for 15% Specifications may change without prior notice - Revised 01/09 .....High Grade Technologies............ .....Power Magnetics............. .....SMD Power High Reliability Inductors............ QPL Components 32 * With or without tab terminations * Terminations with tin-lead coating * Q factor 30 at 1 MHz * SRF 8 MHz * L/L 1000 ppm / C * Materials meet UL94-V0 rating * Weight : 0.12 gram 0.38 0.67 1.0 1.5 2.0 2.7 3.4 4.6 5.6 7.1 10.0 12.0 27.0 100.0 1.5 1.25 1.0 0.85 0.70 0.62 0.55 0.49 0.44 0.41 0.34 0.29 0.20 0.10 16.0 25.0 38.0 54.0 79.0 100 129 160 200 228 335 460 900 3300 * Max permanent DC current at + 125 C. Ambient temperature : - 55C / + 175 C Storage temperature : - 55 C / + 125 C To Order MPCI 233 H01 ### 1x MPCI 233 H01 ### 1 Range Inductance value Version x Terminations x = G for Gold x = T or S for Tinned 3.8 8 K3 5 5.7 0 PCB Layout (suggested) 5.80 4.80 Application Packaging Output filtering in low power DC / DC conversion Tray Tel : + 33 (0) 3 82 59 13 33 www.microspire.com 0 MPCI 233 K38 H01 1x MPCI 233 K67 H01 1x MPCI 233 1K0 H01 1x MPCI 233 1K5 H01 1x MPCI 233 2K0 H01 1x MPCI 233 2K7 H01 1x MPCI 233 3K4 H01 1x MPCI 233 4K6 H01 1x MPCI 233 5K6 H01 1x MPCI 233 7K1 H01 1x MPCI 233 10K H01 1x MPCI 233 12K H01 1x MPCI 233 27K H01 1x MPCI 233 M10 H01 1x Typical Dimensions (mm) 0 DCR m 15% .5 IDC* Amps Specifications may change without prior notice - Revised 10/11 .4 Inductance H 15% 2 ID Code 3 Electrical Data ( 25C ) 3.30 .....High Grade Technologies............ .....Power Magnetics............. .....SMD Power High Reliability Inductors............ Miniature Fixed Chip Inductors - 233 H01 Series 33 Electrical Data ( 25C ) * Energy storage, smoothing, filtering * Applied standards : ECSS-Q-ST-70-02C , MIL-STD-202 , DO-160 and ESCC 3201 generic specification for space products * Materials meet UL94-V0 rating * Suited for IR and vapor reflow soldering * Frequency range up to 1 MHz * Operating temperature range : - 55 C to + 125 C * Weight : < 2 grams ID Code Inductance (H) permanent (ADC) DCR at 25C (m) ESI 01 2K7 1x ESI 01 4K2 1x ESI 01 7K1 1x ESI 01 12K 1x ESI 01 17K 1x ESI 01 22K 1x ESI 01 31K 1x ESI 01 48K 1x ESI 01 64K 1x ESI 01 81K 1x ESI 01 M10 1x ESI 01 M15 1x 2.68 4.20 7.10 12 16.8 22 31 48 64 81 100 151 2.1 1.7 1.2 1.1 0.93 0.76 0.63 0.49 0.41 0.39 0.33 0.26 24 35 65 86 124 184 270 440 630 710 1000 1550 To Order Tol. 10 Notes 1. Inductance at 20 mV, 10 kHz with WK 3260B impedance analyser 2. Typical inductance value at recommended full load 3. I peak max = maximum peak value of current at + 125 C ; L value not guaranted 4. 10 % admissible I ripple over I rated at f = 200 kHz 5. Isolation voltage 150 Vdc - 1 min - Ri > 100 M between winding and magnetic core I I ripple ESI01 ### 1x ESI01 SMD Energy Storage Inductor ### Value code 2K7 = 2,7 H M10 = 100 H 1 Version x x = J J leaded x = W W Terminals I peak I rated t 1/f Marking ESI 01 xxx 1x yy/ww 5 8 Connections Dimensions (mm) J leaded 1-4 4 8.40 MAX 1 W terminals 5-8 2.0 Max , 1.50typ yyww : Date code 7.50 7.50 +0,3 -0 0.15 0.10 +0.2 -0 7.40 5.334 = 8.40 MAX 0.80 3 x 1.778 0.80 8.50 MAX Packaging Tape and Reel: J leaded - 600 units per reel of diameter 330 mm W terminals - 400 units per reel of diameter 330 mm F So Unreeling P1 Tel : + 33 (0) 3 82 59 13 33 W Po www.microspire.com J leaded W terminals F: 11.5 P1: 12 Po: 4.0 W: 24.0 So: none F: 11.5 P1: 18 Po: 4.0 W: 24.0 So: none 9,20 0,30 PCB Layout (suggested) J leaded W terminals 3.50 7.9 1.1 9.50 Specifications may change without prior notice - Revised 07/09 12,5 0,5 1.1 13.9 .....High Grade Technologies............ .....Power Magnetics............. .....SMD Power High Reliability Inductors............ SMD Power Inductors - ESI 01 34 .....High Grade Technologies............ .....Power Magnetics............. .....SMD Power High Reliability Inductors............ SMD Power Inductors - ESI7 * Energy storage, smoothing, filtering * Applied standards : ECSS-Q-ST-70-02C , MIL-STD-202 , DO-160 and ESCC 3201 generic specification for space products * Materials meet UL94-V0 rating * Suited for IR and vapor reflow soldering * Frequency range up to 1 MHz * Operating temperature range : - 55 C to + 125 C * Weight : 2 grams Electrical Data ( 25C ) ID Code Inductance (H) permanent (ADC) Ipeak A DCR at 25C (m) ESI 7 K42 1S ESI 7 K65 1S ESI 7 1K2 1S ESI 7 2K1 1S ESI 7 3K7 1S ESI 7 5K0 1S ESI 7 8K4 1S 0.42 0.65 1.27 2.10 3.74 5.09 8.42 2.9 2.4 1.6 1.3 1.0 0.78 0.60 6.0 5.0 3.6 2.8 2.0 1.8 1.4 7.5 11 23 36 59 107 177 To Order Tol. 25 Notes 1. Inductance at 10 mV, 10 kHz with WK 3260B impedance analyzer 2. Typical inductance value at recommended full load 3. I peak max = maximum peak value of current at + 125 C ; L value not guaranted 4. 10 % admissible I ripple over I rated at f = 200 kHz 5. Isolation voltage 150 Vdc - 1 min - Ri > 100 M between winding and magnetic core ESI 7 ### 1S ESI7 SMD Energy Storage Inductor ### Value code K42 = 0,42 H 2K1 = 2.1 H 1 Version S SMD Terminals I I ripple I rated I peak t 1/f PCB Layout (suggested) Dimensions (mm) 10.0 Bottom view 9.0 -0.60 2 5.60 +0.20 4.50 3 0.6 2.50 1 4 3.0 Pin section 1.0 x 0.25 Connections 1-2 7.10 +0.20 3.80 +0.20 MAX 3-4 Packaging Marking Tape and Reel: 1300 units per reel of diameter 330 mm 7 xxx F So Unreeling P1 Tel : + 33 (0) 3 82 59 13 33 W Po www.microspire.com F: 11.5 P1: 12 Po: 4.0 W: 24.0 So: none yy/ww /M yyww : Date code M : Microspire Specifications may change without prior notice - Revised 06/09