NPN-Silizium-Fototransistor im SMT-Gehause Silicon NPN Phototransistor in SMT Package Lead (Pb) Free Product - RoHS Compliant SFH 3201 Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 460 nm bis 1080 nm * Hohe Linearitat * Nur gegurtet lieferbar * Especially suitable for applications from 460 nm to 1080 nm * High linearity * Available only on tape and reel Anwendungen Applications * Umgebungslicht-Detektor * Lichtschranken fur Gleich- und Wechsel-lichtbetrieb * Industrieelektronik * Messen/Steuern/Regeln" * * * * Typ Type Bestellnummer Ordering Code SFH 3201 Q65110A1207 SFH 3201-2/3 Q65110A2479 2007-03-30 1 Ambient light detector Photointerrupters Industrial electronics For control and drive circuits SFH 3201 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Kollektor-Emitterspannung Collector-emitter voltage VCE 20 V Kollektor-Emitterspannung, t < 120 s Collector-emitter voltage VCE 70 V Kollektorstrom Collector current IC 50 mA Kollektorspitzenstrom, < 10 s Collector surge current ICS 100 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 7 V Verlustleistung, TA = 25 C Total power dissipation Ptot 120 mW Warmewiderstand fur Montage auf PC-Board Thermal resistance for mounting on pcb RthJA 500 K/W 2007-03-30 2 SFH 3201 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 460 ... 1080 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.55 mm2 Abmessung der Chipflache Dimensions of chip area LxB LxW 1x1 mm x mm Halbwinkel Half angle 60 Grad deg. Kapazitat, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 15 pF Dunkelstrom Dark current VCE = 20 V, E = 0 ICEO 3 ( 200) nA 2007-03-30 3 SFH 3201 Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern gekennzeichnet. The phototransistors are grouped according to their spectral sensitivity and distinguished by arabian figures. Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit -1 -2 -3 IPCE 63 ... 125 100 ... 200 160 ... 320 A IPCE 1.65 2.6 4.2 mA Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 k tr , t f 16 24 34 s Kollektor-EmitterSattigungsspannung Collector-emitter saturation voltage IC = IPCEmin1) x 0.3, Ee = 0.1 mW/cm2 VCEsat 170 ( 250) 170 ( 250) 170 ( 250) mV Fotostrom, = 950 nm Photocurrent Ee = 0.1 mW/cm2, VCE = 5 V Ev = 1000 Ix, Normlicht/ standard light A, VCE = 5 V 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 1) IPCEmin is the min. photocurrent of the specified group. Directional Characteristics Srel = f () 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2007-03-30 0.8 0.6 0.4 0 20 40 60 80 100 4 120 SFH 3201 TA = 25 C, = 950 nm Rel. Spectral Sensitivity, Srel = f () Photocurrent IPCE = f (Ee), VCE = 5 V OHF02332 100 Total Power Dissipation Ptot = f (TA) OHF00326 10 1 mA pce S rel % 1 2 3 10 0 80 100 70 10 60 OHF00309 140 Ptot mW 120 -1 80 50 60 10 -2 40 30 40 10 -3 20 20 10 0 400 500 600 700 800 900 nm 1100 Photocurrent IPCE = f (TA), VCE = 5 V, normalized to 25 C PCE OHF01524 1.6 PCE 25 10 -4 -3 10 10 -2 mW/cm 2 Ee Dark Current ICEO = f (VCE), E = 0 1.2 0 20 40 60 80 C 100 TA Dark Current ICEO = f (TA), VCE = 10 V, E = 0 OHF02341 10 2 nA OHF02342 10 3 nA CEO 1.4 0 10 0 CEO 10 1 10 2 10 0 10 1 10 -1 10 0 10 -2 10 -1 0 1.0 0.8 0.6 0.4 0.2 0 -25 0 25 50 75 C 100 TA Photocurrent IPCE = f (VCE) pce 0 10 20 30 40 50 V 70 V CE Collector-Emitter Capacitance CCE = f (VCE), f = 1 MHz OHF00327 3.0 mA C CE 1.0 mW/cm 2 2.5 OHF02344 20 pF 15 2.0 1.5 10 0.5 mW/cm 2 1.0 0.25 mW/cm 2 5 0.5 0.1 mW/cm 2 0 0 10 2007-03-30 20 30 40 50 60 V 70 Vce 0 -2 10 10 -1 10 0 10 1 V 10 2 V 5 20 40 60 80 C 100 TA SFH 3201 Mazeichnung Package Outlines 6.2 (0.244) 6 1 2 3 2.1 (0.083) 1.7 (0.067) B 5 4 0.1 M B 1 2 3 4 5 6 - - Emitter Collector - - Mae in mm (inch) / Dimensions in mm (inch). 2007-03-30 3.8 (0.150) 0.7 (0.028) 0.4 (0.016) 0.5 (0.020) 0.3 (0.012) Active area 0.55 (0.022) 4.2 (0.165) 2.54 (0.100) spacing 1.27 (0.050) spacing 0.15 (0.006) 0.13 (0.005) A 5.8 (0.228) 3.4 (0.134) 3.0 (0.118) 0...0.1 (0...0.004) 0.2 M A 6 GEOY6982 SFH 3201 0.6 (0.024) Reflow Loten Reflow Soldering 1.2 (0.047) 1.27 (0.050) 1.27 (0.050) Empfohlenes Lotpaddesign Recommended Solder Pad Padgeometrie fur verbesserte Warmeableitung Paddesign for improved Heat dissipation 3.9 (0.154) Cu-Flache >5 mm 2 Cu-area >5 mm 2 Lotstopplack Solder resist 2007-03-30 7 OHPY0030 SFH 3201 Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C 250 T Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020C) (acc. to J-STD-020C) C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-03-30 8 s 250 SFH 3201 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-03-30 9