MCC 1N5268 THRU 1N5276 omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * * * * * * 500 mW Zener Diode 82 to 150 Volts Wide Voltage Range Available Glass Package High Temp Soldering: 260C for 10 Seconds At Terminals Marking : Cathode band and type number Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Moisture Sensitivity: Level 1 per J-STD-020C Maximum Ratings * * * * * DO-35 Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C 500 mWatt DC Power Dissipation Power Derating: 4.0mW/C above 50C Forward Voltage @ 200mA: 1.1 Volts Figure 1 - Typical Capacitance D 100 A Cathode Mark pf 10 B At zero volts At -2 Volts V R D 1 0 100 C 200 VZ Typical Capacitance (pf) - versus - Zener voltage (VZ) Figure 2 - Derating Curve 400 DIMENSIONS mW DIM A B C D 200 INCHES MIN ------1.000 MAX .166 .079 .020 --- MM MIN ------25.40 MAX 4.2 2.00 .52 --- NOTE 0 50 100 150 Temperature C Power Dissipation (mW) - Versus - Temperature C Note: 1. Lead in Glass Exemption Applied, see EU Directive Annex 5. Revision: 8 www.mccsemi.com 1 of 3 2010/12/02 MCC 1N5268 thru 1N5276 TM Micro Commercial Components ELECTRICAL CHARACTERISTICS @25C MCC PART NUMBER 1N5268 1N5269 1N5270 1N5272 1N5273 1N5274 1N5275 1N5276 NOMINAL ZENER VOLTAGE VZ @ IZT VOLTS 82 87 91 110 120 130 140 150 TEST CURRENT I ZT mA 1.5 1.4 1.4 1.1 1.0 0.95 0.90 0.85 MAXIMUM ZENER IMPEDANCE `B' SUFFIX ONLY Z ZT @ IZT Z ZK @I ZK = 0.25mA OHMS OHMS 330 2000 370 2200 400 2300 750 3000 900 4000 1100 4500 1300 4500 1500 5000 MAXIMUM REVERSE LEAKAGE CURRENT IR @ VR A VOLTS 0.1 62 0.1 68 0.1 69 0.1 84 0.1 91 0.1 99 0.1 106 0.1 114 MAX. ZENER VOLTAGE TEMP COEFFICIENT `B' SUFFIX ONLY % / C +0.098 +0.099 +0.099 +0.110 +0.110 +0.110 +0.110 +0.110 NOTE 1: Table as shown lists type numbers, which indicate a tolerance of 20% with guaranteed limits on only Vz, IR, and V F. Devices with guaranteed limits on all six parameters are indicated by suffix "A" for 10%, "B" for 5%, "C" for 2% tolerance NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds. NOTE 3: Temperature coefficient (aVZ). Test conditions for temperature coefficient are as follows: a. IZT = 7.5mA, TI = 25oC T2 = 125oC (1N5221 thru 1N5242) b. IZT = Rated IZT , TI = 25oC, T2 = 125oC (1N5243 thru 1N5276) Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature. Revision: 8 www.mccsemi.com 2 of 3 2010/12/02 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel; 10Kpcs/Reel (Part Number)-AP Ammo Packing;5Kpcs/AmmoBox (Part Number)-BP Bulk;500pcs/Bag ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 8 3 of 3 2010/12/02 3