Supertex inc. HV5623 32-Channel Serial To Parallel Converter With Open Drain Outputs Features Processed with HVCMOS technology Sink current minimum 100mA Shift register speed 16MHz Polarity and blanking inputs CMOS compatible inputs (R) Applications Inkjet and Electrostatic Print Heads AC-Electroluminescent Displays MEMS Applications General Description The HV5623 is a low-voltage serial to high-voltage parallel converter with open drain outputs. This device has been designed for use as a driver for AC-electroluminescent displays. It can also be used in any application requiring multiple output high voltage current sinking capabilities, such as driving inkjet and electrostatic print heads, plasma panels, and vacuum fluorescent or large matrix LCD displays. This device consists of a 32-bit shift register, 32 latches, and control logic to perform the polarity selection and blanking of the outputs. Data are shifted through the shift register on the high to low transition of the clock. The HV5623 shifts in a clockwise direction when viewed from the top of the package. A data output buffer is provided for cascading devices. This output reflects the current status of the last bit of the shift register. Operation of the shift register is not affected by the LE (latch enable), BL (blanking), or POL (polarity) inputs. Transfer of data from the shift register to the latch occurs when the LE (latch enable) input is high. The data in the latch is stored when LE is low. Block Diagram POL BL LE HVOUT1 DATA INPUT Latch HVOUT2 CLK Latch 32-Bit Shift Register (Outputs 3 to 30 not shown) HVOUT31 Latch HVOUT32 DATA OUTPUT Supertex inc. Latch 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com HV5623 Pin Configuration Ordering Information High Voltage Output HVOUT Device 44 44-Lead QFN (max V) 7.00x7.00mm body, 0.80mm height (max), 0.50mm pitch 220 HV5623K7-G HV5623 1 -G indicates package is RoHS compliant (`Green') Absolute Maximum Ratings Parameter Value Output voltage, HVOUT -0.5V to +230V 1 Logic input levels 44-Lead QFN (K7) -0.5V to +7.0V Supply voltage, VDD1 -0.5V to VDD +0.5V 1 Ground current2 (top view) Product Marking 1.5A Continuous total power dissipation3 Operating temperature range HV5623K7 LLLLLLLLL YYWW AAA CCC 3.4W -40C to +85C Storage temperature range -65C to +150C Maximum junction temperature +125C Thermal resistance (ja) 29 C/W Package may or may not include the following marks: Si or 44-Lead QFN (K7) O 3 L = Lot Number YY = Year Sealed WW = Week Sealed A = Assembler ID C = Country of Origin = "Green" Packaging Notes: 1. Voltages are referenced to VSS. 2. Duty cycle is limited by the total power dissipated in the package. 3. 1.0oz 4-layer 3x4" PCB. Operating Supply Voltages and Conditions Sym Parameter Min Typ Max Units Conditions VDD Logic supply voltage 4.5 - 5.5 V --- HVOUT High voltage output -0.3 - +220 V --- VIH High-level input voltage 0.8VDD - VDD V --- VIL Low-level input voltage 0 - 0.2VDD V --- fCLK Clock frequency - - 16 MHz --- TA Operating free-air temperature -40 - +85 C --- Notes: Power-up sequence should be the following: 1. Connect ground. 2. Apply VDD. 3. Set all inputs to a known state. Power-down sequence should be the reverse of the above. Supertex inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 2 HV5623 DC Electrical Characteristics Sym (Over operating supply voltages and temperature, unless otherwise noted) Parameter Min Typ Max Units Conditions IDD VDD supply current - - 25 mA IDDQ Quiescent VDD supply current - - 100 A OFF state output current - - 10 A IIH High-level logic input current - - 1.0 A VIH = VDD IIL Low-level logic input current - - -1.0 A VIL = 0V VDD -1.0V - - V IDOUT = -10mA HVOUT - - 15 V IHVOUT = +100mA DATA OUT - - 1.0 V IDOUT = +10mA - - -1.5 V IOL = -100mA Min Typ Max Units Conditions - - 16 MHz --- IO(OFF) VOH High level output VOL Low level output VOC HVOUT clamp voltage AC Electrical Characteristics (V DD Sym fCLK = 16MHz, fDATA = 8.0MHz DIN = 0V, all input logic pins = 0V, all outputs OFF All outputs high, all switches parallel = 5.0V, Tj = 25OC) Parameter fCLK Clock frequency tW Clock high / low pulse width 31 - - ns --- tSU Data setup time before clock falls 25 - - ns --- tH Data hold time after clock falls 10 - - ns --- tON Turn ON time, HVOUT from Enable - - 400 ns RL = 2.0k to VPP max tDHL Delay time clock to data high to low - - 35 ns CL = 15pF tDLH Delay time clock to data low to high - - 35 ns CL = 15pF tDLE Delay time clock to LE low to high 20 - - ns --- tWLE Width of LE pulse 20 - - ns --- tSLE LE set-up time before clock falls 20 - - ns --- CIN Digital logic input capacitance - - 15 pF --- Input and Output Equivalent Circuits VDD VDD HVOUT DATA OUTPUT DATA INPUT VSS VSS VSS Logic Inputs Supertex inc. Logic Data Output High Voltage Outputs 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 3 HV5623 Switching Waveforms DATA INPUT 50% Data Valid tSU CLK 50% VIH 50% VIL tH 50% 50% tWH 50% tWL VOL tDLH VOH 50% VOL tDHL VIH 50% 50% LE tWLE tDLE VIL VOH 50% DATA OUTPUT VIH VIL tSLE HV OUT w/ S/R HIGH VOH 10% VOL tON Function Table Inputs Function Outputs Shift Reg 1 2...32 HV Outputs 1 2...32 Data CLK LE BL POL All ON X X X L L * *...* ON All OFF X X X L H * *...* OFF Invert mode X X L H L * *...* Load S/R H or L L H H H or L X H or L H H * X H or L H L L H H H H H Load latches Transparent latch mode ON...ON * OFF...OFF * * *...* * * *...* * *...* * *...* * * *...* * *...* * H L *...* OFF *...* * H H *...* ON *...* * *...* Notes: H = high level, L = low level, X = irrelevant, = high-to-low transition, = low-to-high transition * = dependent on previous stage's state before the last CLK or last LE high. Supertex inc. Data Out * 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 4 HV5623 Pin Description Pin # Function 1 HVOUT22 2 HVOUT21 3 HVOUT20 4 HVOUT19 5 HVOUT18 6 HVOUT17 7 HVOUT16 8 HVOUT15 9 HVOUT14 10 HVOUT13 11 HVOUT12 12 HVOUT11 13 HVOUT10 14 HVOUT9 15 HVOUT8 16 HVOUT7 17 HVOUT6 18 HVOUT5 19 HVOUT4 20 HVOUT3 21 HVOUT2 22 HVOUT1 23 DATA OUT 24 N/C 25 N/C 26 N/C 27 POL Description High voltage outputs. Data output pin. No internal connection. Inverts the polarity of the HVOUT pins 28 CLK Clock pin, shift registers shifts data on falling edge of input clock. 29 VSS Reference voltage, usually ground. 30 VDD Logic supply voltage. 31 LE 32 DATA IN Latch enable pin, data is shifted from shift register to latches on logic input high. Data input pin. 33 BL Blanking pin sets all HVout pins ON or OFF depending upon state of polarity. See function table. 34 N/C No internal connection. 35 HVOUT32 36 HVOUT31 37 HVOUT30 38 HVOUT29 39 HVOUT28 40 HVOUT27 41 HVOUT26 42 HVOUT25 43 HVOUT24 44 HVOUT23 Center Tab High voltage outputs. Connect to VSS Supertex inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 5 HV5623 44-Lead QFN Package Outline (K7) 7.00x7.00mm body, 0.80mm height (max), 0.50mm pitch D2 D 44 Note 1 (Index Area D/2 x E/2) 44 Note 1 (Index Area D/2 x E/2) 1 1 E2 E Top View View B Bottom View Note 3 x4 L A A3 Seating Plane L1 Note 2 A1 b e Side View View B Notes: 1. A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or a printed indicator. 2. Depending on the method of manufacturing, a maximum of 0.15mm pullback (L1) may be present. 3. The inner tip of the lead may be either rounded or square. Symbol Dimension (mm) A A1 MIN 0.70 0.00 NOM 0.75 0.02 MAX 0.80 0.05 A3 0.20 REF b D D2 E E2 0.18 6.85* 5.00 6.85* 5.00 0.25 7.00 5.15 7.00 5.15 0.30 7.15* 5.25 7.15* 5.25 e 0.50 BSC L L1 0.45 0.00 0O 0.55 - - 0.65 0.15 14O JEDEC Registration MO-220, Variation WKKD-3, Issue K, June 2006 * This dimension is not specified in the JEDEC drawing. This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc. #: DSPD-44QFNK77X7P050, Version A122309. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate "product liability indemnification insurance agreement." Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. (c)2011 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-HV5623 A062111 6 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com