Transistors
1
Publication date: January 2003 SJC00061BED
2SB0873 (2SB873)
Silicon PNP epitaxial planar type
For low-frequency power amplification
For DC-DC converter
For stroboscope
■Features
•Low collector-emitter saturation voltage VCE(sat)
•Large collector current IC
■Absolute Maximum Ratings Ta = 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO −30 V
Collector-emitter voltage (Base open) VCEO −20 V
Emitter-base voltage (Collector open) VEBO −7V
Collector current IC−5A
Peak collector current ICP −10 A
Collector power dissipation PC1W
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
■Electrical Characteristics Ta = 25°C ± 3°C
Unit: mm
Note) The part number in the parenthesis shows conventional part number.
1: Emitter
2: Collector
3: Base
EIAJ: SC-51
TO-92L-A1 Package
5.9
±0.2
0.7
±0.1
4.9
±0.2
8.6
±0.2
0.7
+0.3
–0.2
13.5
±0.5
2.54
±0.15
(3.2)
(1.27)(1.27)
0.45
+0.2
–0.1
0.45
+0.2
–0.1
132
Parameter Symbol Conditions Min Typ Max Unit
Collector-emitter voltage (Base open) VCEO IC = −1 mA, IB = 0 −20 V
Emitter-base voltage (Collector open) VEBO IE = −10 µA, IC = 0 −7V
Collector-base cutoff current (Emitter open)
ICBO VCB = −10 V, IE = 0 −100 nA
Emitter-base cutoff current (Collector open)
IEBO VEB = −5 V, IC = 0 −100 nA
Forward current transfer ratio *1, 2 hFE VCE = −2 V, IC = −2 A 90 625
Collector-emitter saturation voltage *1VCE(sat) IC = −3 A, IB = − 0.1 A −1V
Transition frequency fTVCB = −6 V, IE = 50 mA, f = 200 MHz 120 MHz
Collector output capacitance Cob VCB = −20 V, IE = 0, f = 1 MHz 85 pF
(Common-emitter reverse transfer)
Rank P Q R
hFE 90 to 135 120 to 205 180 to 625
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *1: Pulse measurement
*2: Rank classification
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SB0873
2SJC00061BED
VCE(sat) IChFE ICfT IE
PC TaIC VCE IC VBE
Cob VCB Safe operation area
0 16040 12080 14020 10060
0
1.2
1.0
0.8
0.6
0.4
0.2
Collector power dissipation P
C
(W)
Ambient temperature T
a
(°C)
0−12−10−8−2−6−4
0
−6
−5
−4
−3
−2
−1
Ta = 25°C
−35 mA −30 mA
−25 mA
−20 mA
−15 mA
−10 mA
−5 mA
−1 mA
IB = −40 mA
Collector current IC (A)
Collector-emitter voltage VCE (V)
0−2.0−1.6− 0.4 −1.2− 0.8
0
−12
−10
−8
−6
−4
−2
V
CE
= −2 V
T
a
= 75°C−25°C
25°C
Base-emitter voltage V
BE
(V)
Collector current I
C
(A)
− 0.01
− 0.1 −1−10
− 0.01
− 0.1
−1
−10
−100 I
C
/ I
B
= 30
T
a
= 75°C
25°C
−25°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(A)
− 0.01
− 0.1 −1−10
0
600
500
400
300
200
100
V
CE
= −2 V
T
a
= 75°C
25°C
−25°C
Forward current transfer ratio h
FE
Collector current I
C
(A)
1 10 100
0
240
200
160
120
80
40
VCB = −6 V
Ta = 25°C
Transition frequency fT (MHz)
Emitter current IE (mA)
−1−10 −100
Collector output capacitance
(Common base, input open circuited) Cob (pF)
0
200
160
120
80
40
I
E
= 0
f = 1 MHz
T
a
= 25°C
Collector-base voltage VCB (V)
− 0.1 −1−10 −100
− 0.01
− 0.1
−1
−10
−100 Single pulse
Ta = 25°C
t = 10 ms
t = 1 s
ICP
IC
Collector current IC (A)
Collector-emitter voltage VCE (V)
This product complies with the RoHS Directive (EU 2002/95/EC).
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
