VS-10CTQ150SPbF, VS-10CTQ150-1PbF Vishay High Power Products Schottky Rectifier, 2 x 5 A FEATURES VS-10CTQ150-1PbF VS-10CTQ150SPbF * * * * * Base common cathode 2 Base common cathode 2 * * 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 * * * 175 C TJ operation Center tap configuration Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2x5A VR 150 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM VALUES UNITS 10 A 150 V IFSM tp = 5 s sine 620 A VF 5 Apk, TJ = 125 C (per leg) 0.73 V TJ Range - 55 to 175 C VS-10CTQ150SPbF VS-10CTQ150-1PbF UNITS 150 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS per leg VALUES UNITS 5 IF(AV) 50 % duty cycle at TC = 155 C, rectangular waveform per device A 10 Following any rated load condition and with rated VRRM applied Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 1 A, L = 10 mH 5 mJ IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 1 A Repetitive avalanche current per leg Document Number: 94116 Revision: 23-Mar-10 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse For technical questions, contact: diodestech@vishay.com 620 A 115 www.vishay.com 1 VS-10CTQ150SPbF, VS-10CTQ150-1PbF Vishay High Power Products Schottky Rectifier, 2 x 5 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 5A Maximum forward voltage drop per leg See fig. 1 VFM (1) 5A IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Maximum junction capacitance per leg 1.10 TJ = 25 C V 0.73 TJ = 125 C 0.86 0.05 VR = Rated VR TJ = 125 C UNITS 0.93 TJ = 25 C 10 A 10 A Maximum reverse leakage current per leg See fig. 2 VALUES mA 7 TJ = TJ maximum CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C Typical series inductance per leg LS Measured lead to lead 5 mm from package body Maximum voltage rate of change dV/dt Rated VR 0.468 V 28 m 200 pF 8.0 nH 10 000 V/s Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case per leg C DC operation RthCS Mounting surface, smooth and greased C/W 0.50 2 g 0.07 oz. minimum 6 (5) kgf * cm maximum 12 (10) (lbf * in) Approximate weight www.vishay.com 2 - 55 to 175 1.75 Typical thermal resistance, case to heatsink (only for TO-220) Marking device UNITS 3.50 RthJC Maximum thermal resistance, junction to case per package Mounting torque VALUES Case style D2PAK Case style TO-262 For technical questions, contact: diodestech@vishay.com 10CTQ150S 10CTQ150-1 Document Number: 94116 Revision: 23-Mar-10 VS-10CTQ150SPbF, VS-10CTQ150-1PbF Schottky Rectifier, 2 x 5 A Vishay High Power Products 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 100 TJ = 175 C TJ = 125 C TJ = 25 C 10 1 TJ = 175 C 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 100 C 0.01 TJ = 75 C TJ = 50 C 0.001 TJ = 25 C 0.0001 0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 100 TJ = 25 C 10 0 20 40 60 80 100 120 140 160 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.01 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC Single pulse (thermal resistance) 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94116 Revision: 23-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-10CTQ150SPbF, VS-10CTQ150-1PbF Vishay High Power Products Schottky Rectifier, 2 x 5 A 5 170 Average Power Loss (W) Allowable Case Temperature (C) 180 DC 160 150 Square wave (D = 0.50) 80 % rated VR applied 140 130 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 4 3 RMS limit 2 DC 1 See note (1) 0 120 0 2 4 6 0 8 1 2 3 4 5 6 7 8 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 10 000 1000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94116 Revision: 23-Mar-10 VS-10CTQ150SPbF, VS-10CTQ150-1PbF Schottky Rectifier, 2 x 5 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- 10 C T Q 150 S 1 2 3 4 5 6 7 TRL PbF 8 1 - HPP product suffix 2 - Current rating (10 A) 3 - Circuit configuration: C = Common cathode 4 - T = TO-220 5 - Schottky "Q" series 6 - Voltage rating (150 = 150 V) 7 - 9 S = D2PAK -1 = TO-262 8 - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95014 Part marking information www.vishay.com/doc?95008 Packaging information www.vishay.com/doc?95032 Document Number: 94116 Revision: 23-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR D2PAK in millimeters and inches Conforms to JEDEC outline D2PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb 0.004 M B 0.010 M A M B Plating 2x e Base Metal (4) b1, b3 H Gauge plane Seating plane Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode SYMBOL MILLIMETERS MIN. c1 (4) (c) B 0 to 8 MAX. L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail "A" Rotated 90 CW Scale: 8:1 INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch Document Number: 95014 Revision: 31-Mar-09 e (7) 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Outline conforms to JEDEC outline TO-263AB For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Outline Dimensions D2PAK, TO-262 Vishay High Power Products DIMENSIONS FOR TO-262 in millimeters and inches Modified JEDEC outline TO-262 (Datum A) (2) (3) E A A c2 B E A (3) L1 Seating plane D 1 2 3 C L2 B D1 (3) B C L (2) A c 3 x b2 3xb E1 A1 (3) Section A - A 2xe Plating 0.010 M A M B (4) b1, b3 Base metal Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip SYMBOL c1 c (4) (b, b2) Section B - B and C - C Scale: None MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.06 4.83 0.160 0.190 A1 2.03 3.02 0.080 0.119 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 NOTES 4 4 4 D 8.51 9.65 0.335 0.380 D1 6.86 8.00 0.270 0.315 3 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 e 2.54 BSC 0.100 BSC L 13.46 14.10 0.530 0.555 L1 - 1.65 - 0.065 L2 3.56 3.71 0.140 0.146 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Controlling dimension: inches www.vishay.com 2 2 (6) 3 Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) and D1 (minimum) where dimensions derived the actual package outline For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com Document Number: 95014 Revision: 31-Mar-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000