FGG-EGG Crimp contacts
Part number
male female
for plug for socket
Section
(mm2)
Note: These positioners are suitable for use with both manual and pneumatic
crimping tools according to the MIL-C-22520/7-01 standard.
Male Female
Tooling
CAT.MM.LEN.P0508 CHF 1.50 / EURO 1 / USD 1.1 / RMB 10 Data subject to change, printed in Switzerland, May 2008
www.lemo.com
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
Connector
Series Type
302-303
0M 304-305
305
1M 307-308
308-310
2M 312-319
0.9 1.10
0.7 0.85
0.9 1.10
0.7 0.85
0.9 1.10
0.7 0.85
24 20 0.25 0.50
26 22 0.14 0.34
24 20 0.25 0.50
26 22 0.14 0.34
24 20 0.25 0.50
26 22 0.14 0.34
FGN.0M.560.ZZC EGN.0M.660.ZZM
FGN.0M.555.ZZC EGN.0M.655.ZZM
FGN.0M.560.ZZC EGN.0M.660.ZZM
FGN.0M.555.ZZC EGN.0M.655.ZZM
FGN.0M.560.ZZC EGN.0M.660.ZZM
FGN.0M.555.ZZC EGN.0M.655.ZZM
Part
ø A ø C
DCE Positioners for crimp contacts
Postioners part number
For male For female
contacts contacts
Connector
Series Type
302-303
0M 304-305
305
1M 307-308
308-310
2M 312-319
0.9 1.10
0.7 0.85
0.9 1.10
0.7 0.85
0.9 1.10
0.7 0.85
DCE.91.090.MVC DCE.91.090.MVM
DCE.91.070.MVC DCE.91.070.MVM
DCE.91.090.MVC DCE.91.090.MVM
DCE.91.070.MVC DCE.91.070.MVM
DCE.91.090.MVC DCE.91.090.MVM
DCE.91.070.MVC DCE.91.070.MVM
Note: 1) modified elastomer resistant to fluids with hot melt sealant.
2) elastomer resistant to fluids. We recommend a thermosetting sealant with this
type of boot.
Extractors
part number
DCF.93.090.4LT
DCF.93.070.4LT
0.9
0.7
Contact
ø
DCF Extractors for crimp contacts
Part Numbering System
Tightening/Untightening torque (plug-socket) Mounting nut torque (on panel)
Torque (N.cm)
Tightening Untightening
2.8-3.9 4.6-5.9
3.0-4.0 4.5-6.0
7.0-12.0 9.0-14.0
Series
0M
1M
2M
Torque (N.m)
1.0
1.5
2.0
Series
0M
1M
2M
FM N 1M 307 XLC
.. .
Model
N = blue (standard)
Keyway (color code): P = yellow
U = green
Series: 0M to 2M Insert configuration
Optional: T = Mold stop, P = Potted
C = Male to crimp
Contact type: M = Female to crimp
N = Female to print
Part Number Example
FMN.1M.307.XLCT = Straight plug with key (N), 1M series, multipole type with 7 male crimp contacts, with mold stop.
Note: this model is used for male and
female contacts.