QUICK CONNECT
`MAINS` CONNECTOR
The ULTEMate electrical `Mains` connection solution
for harsh environments.
Being constructed from Ultem®, a high temperature
and corrosion resistant composite material, makes
this the ‘ULTEMate’ electrical connection solution.
The Quick Connect 3 way `Mains` connector is
designed to meet BS EN 60320-2-2, a specification
covering the use of `Interconnection Couplers for
Household and similar equipment.`
It is also chemical resistant and environmentally
sealed to IP68.
It is ideal for the most rigorous `Mains` applications.
GENERAL SPECIFICATION
FEATURES
240V AC 13Amp rated
Early mate / late break leading Earth contact
Quick latch mechanism
Universal mounting
Choice of wire seal, gland nut & over moulding
Standard sealing O-ring
Constructed from Ultem®, a high temperature
resistant composite material
Meets UL94 Class V-0 flammability requirements
Sealed against dust and moisture to IP68
Crimp contacts, insertion / extraction tools,
dust caps and back fittings
Materials
Shell / Insulators: Temperature and corrosion
resistant composite, Ultem®
Contacts: Copper Alloy / Gold Plated
for 0.5 – 1.0mm2 wire
Back Fitting Options:
Cable Compression Seal and/or Wire Seal
Overmould
Panel and Flange mount
Can be used with Conduit, Heat Shrink Tube/Boots
(see separate Back Fittings data sheet for details)
Contact Rating
Current Rating: 13 Amps
Working Voltage: 240Vac
Insulation resistance: 1000 MΩ
Temperature Rating [connector]
-55°C to 150°C (The upper limit is the maximum internal
Hot spot temperature resulting from the combination of ambient
temperature and heating due to current)
BENEFITS
Same size contact in each position
Designed to BS EN 60320-2-2
Positive location
Flexible panel mounting of both halves
Variety of options for maximum design-in flexibility
Cost effective
Can be washed, sterilised and autoclaved without
performance degradation
Withstands heat, dust and moisture
Picture of 3 way