950B1G684K - Electrocube, Inc. and Seacor products

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)

POLYPROPYLENE AND FOIL CAPACITORS

950 SERIES

SPECIFICATIONS

The Series 950 foil capacitors offer

high frequency operation, high cur-

rent and low ESR. They are able to

handle high surge currents without

degrading. This capacitor series was

designed for high voltage AC and

pulsing applications. The units are

rated for 135, 270, 440 and 660VAC

(to 100 KHz), but may also be used

for all DC applications up to 200

VDC and 400 VDC respectively.

Units are available in axial-lead

wrap and fill, in oval and round

shapes, and in voltages of 100, 200,

400, 600 and 1000 VDC.

All capacitors feature extended foil

construction and standard tin-coated

copper leads.

Protective clear wrap is offered on

all wrap and fill units.

The potting material and endfills

of Electrocube’s capacitors meet or

exceed the flammability require-

ments of UL94VO.

Dimensional variations for all

MFD values are available with the

same volume to meet your design

requirements.

TYPICAL DIELECTRIC CHARACTERISTIC CURVES

NOTES:

For information regarding insulating

sleeves, mountings, special terminals, non-

standard leads, circuit connections and

other hardware, please consult factory.

For styles and ratings not shown, or for

unusual requirements necessitated by

special circuit applications (including

higher IR or lower DF), consult the

factory direct.

% CAPACITANCE CHANGE

% DISSIPATION FACTOR

CAPACITANCE, MFD

INSULATION RESISTANCE

(MEGOHMS TIMES MICROFARADS)

All Electrocube film capacitors have endfills and tape that

meet or exceed the flammability requirements of UL94V0.

TYPICAL ESR VALUES — 950 SERIES

NOTES: Derate Amp 30% @ 50°C.

Current ratings based on component

ambient temperature of 25°C.

Temperature: -55°C to +85°C at rated voltage; to +105°C

with 50% voltage derating.

Dielectric Voltage Test: Will withstand the application of 400 VDC,

800 VDC, 1200 VDC and 1500 VDC on 135 VAC, 270 VAC, 440 VAC

and 660VAC, respectively at 25°C for a period not to exceed

1minute; current limited to 5 mA.

DC Life Tests: Will withstand the application of 280 VDC, 560 VDC,

840 VDC and 1380 VDC, respectively, on the 135 VRMS, 270 VRMS,

440 VRMS and 660 VRMS parts at 105°C for 250 hrs., with not

more than 1 failure in in 12 permitted, current limited to 5 mA.

For life test details, contact the factory.

Dissipation Factor: Shall not exceed 0.1%

at 25°C for values to 1 mfd; 0.2% for

values 1 mfd and over.

Dielectric Absorption: Shall not

exceed 0.1% at 25°C per MIL-C-19978.

Acceptance Criteria: Measurement

frequency for capacitance and

dissipation factor shall be 1000 Hz

for values up to 1 mfd and 120 Hz

for values of 1 mfd and over.

950 SERIES

RMS CURRENT (MAX)

20 Hz to 100 KHz

CURRENT (AMPS)

200V 400V 1000V

CAP.

MFD. PART

NO.

.0010

.0015

.0022

.0033

.0047

.0068

.0082

.010

.015

.022

.033

.047

.068

.082

.10

.15

.22

.33

.47

.68

.82

1.0

2.0

5.0

.075

.100

.125

.150

.200

.300

.400

.500

.700

.825

.750

1.00

1.25

1.30

1.75

2.00

2.50

3.75

4.50

4.25

5.25

9.00

15.0

.200

.225

.300

.350

.400

.600

.700

.825

1.00

1.25

1.50

2.00

2.25

3.00

3.50

3.75

5.75

6.50

11.0

25.0

.300

.500

.600

.900

.950

.975

1.00

1.10

1.25

1.50

2.00

2.25

2.50

3.00

5.00

6.00

8.00

10.0

12.0

11.0

14.0

18.0

30.0

50.0

102

152

222

332

472

682

822

103

153

223

333

473

683

823

104

154

224

334

474

684

824

105

205

505

POLYPROPYLENE AND FOIL CAPACITORS

950 SERIES

FLAME RETARDANT

950B WRAP AND FILL, OVAL

FLAME RETARDANT

950D WRAP AND FILL, ROUND

FLAME RETARDANT

951A EPOXY CASE,

RECTANGULAR

AXIAL LEADS

FLAME RETARDANT

952A EPOXY CASE,

RECTANGULAR

RADIAL LEADS

SERIES NO. DESCRIPTION

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)

.0010 950B1C102* .09 .18 .56 26 950B1E102* .14 .24 .75 24

.0015 950B1C152* .09 .18 .56 26 950B1E152* .18 .27 .75 24

.0022 950B1C222* .09 .18 .56 26 950B1E222* .18 .28 .75 24

.0033 950B1C332* .09 .18 .56 26 950B1E332* .18 .28 .75 24

.0047 950B1C472* .09 .18 .56 26 950B1E472* .18 .28 .75 24

.0068 950B1C682* .11 .20 .56 26 950B1E682* .18 .28 .75 24

.0082 950B1C822* .11 .21 .56 26 950B1E822* .20 .29 .75 24

.010 950B1C103* .13 .22 .56 26 950B1E103* .22 .31 .75 24

.015 950B1C153* .16 .25 .56 24 950B1E153* .29 .38 .75 24

.022 950B1C223* .19 .29 .56 24 950B1E223* .20 .30 1.00 22

.033 950B1C333* .18 .28 .69 24 950B1E333* .26 .36 1.00 22

.047 950B1C473* .22 .31 .69 24 950B1E473* .32 .42 1.00 22

.068 950B1C683* .23 .32 .81 24 950B1E683* .27 .43 1.25 22

.082 950B1C823* .25 .34 .81 24 950B1E823* .30 .46 1.25 22

.10 950B1C104* .28 .37 .81 24 950B1E104* .34 .50 1.25 22

.15 950B1C154* .30 .40 .95 22 950B1E154* .43 .60 1.25 20

.22 950B1C224* .27 .44 1.21 22 950B1E224* .54 .71 1.25 20

.33 950B1C334* .34 .51 1.21 22 950B1E334* .56 .73 1.50 20

.47 950B1C474* .41 .58 1.21 20 950B1E474* .54 .70 2.00 20

.68 950B1C684* .39 .56 1.72 20 950B1E684* .67 .83 2.00 20

.82 950B1C824* .43 .60 1.72 20 950B1E824* .74 .91 2.00 20

1.0 950B1C105* .49 .66 1.72 20 950B1E105* .83 .99 2.00 20

2.0 950B1C205* .66 .83 1.96 20 950B1E205* 1.21 1.37 2.00 20

5.0 950B1C505* 1.18 1.35 1.96 20 950B1E505* - - - -

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. T W L (AWG) PART NO. T W L (AWG)

POLYPROPYLENE AND FOIL

950B SERIES

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

WRAP AND FILL

OVAL CONFIGURATION

LEAD LENGTH: 2.0” ± .50”

For max. T, W and L dimensions, allow +.050”.

200 VOLT DC/135 VAC 400 VOLT DC/270 VAC

600 VOLT DC/440 VAC 1000 VOLT DC/660 VAC

.0010 950B1F102* .14 .24 .75 26 950B1G102* .11 .20 .75 22

.0015 950B1F152* .18 .27 .75 26 950B1G152* .13 .22 .75 22

.0022 950B1F222* .28 .75 .75 26 950B1G222* .17 .26 .75 22

.0033 950B1F332* .19 .29 .75 24 950B1G332* .21 .31 .75 22

.0047 950B1F472* .32 .41 .75 24 950B1G472* .23 .33 .75 20

.0068 950B1F682* .22 .31 .95 24 950B1G682* .19 .29 1.00 20

.0082 950B1F822* .23 .31 .95 24 950B1G822* .26 .36 1.00 20

.010 950B1F103* .27 .36 .95 24 950B1G103* .29 .39 1.00 20

.015 950B1F153* .33 .43 .95 22 950B1G153* .35 .45 1.00 20

.022 950B1F223* .28 .45 1.25 20 950B1G223* .25 .42 1.25 20

.033 950B1F333* .36 .57 1.25 20 950B1G333* .32 .49 1.25 20

.047 950B1F473* .43 .60 1.25 20 950B1G473* .33 .50 1.50 20

.068 950B1F683* .53 .70 1.25 20 950B1G683* .42 .59 1.50 18

.082 950B1F823* .49 .65 1.50 18 950B1G823* .47 .63 1.50 18

.10 950B1F104* .55 .71 1.50 18 950B1G104* .58 .71 1.50 18

.15 950B1F154* .59 .77 1.75 18 950B1G154* .67 .83 1.50 18

.22 950B1F224* .49 .66 1.75 18 950B1G224* .83 .99 1.50 18

.33 950B1F334* .62 .78 1.75 18 950B1G334* 1.04 1.20 1.50 18

.47 950B1F474* .67 .84 2.00 18 950B1G474* 1.23 1.67 1.50 18

.68 950B1F684* .82 .98 2.00 18 950B1G684* 1.18 1.35 2.00 18

.82 950B1F824* .90 1.07 2.00 18 950B1G824* 1.31 1.48 2.00 18

1.0 950B1F105* .90 1.09 2.50 18 950B1G105* 1.46 1.63 2.00 18

2.0 950B1F205* 1.29 1.49 2.50 18 950B1G205* 1.67 1.84 2.75 18

5.0 950B1F505* 1.68 1.98 3.00 18 950B1G505* 2.70 2.87 2.75 18

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. T W L (AWG) PART NO. T W L (AWG)

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (A: 04/03)

.0010 950D1C102* .15 .56 24 950D1E102* .21 .75 24

.0015 950D1C152* .15 .56 24 950D1E152* .24 .75 24

.0022 950D1C222* .15 .56 24 950D1E222* .24 .75 24

.0033 950D1C332* .15 .56 24 950D1E332* .24 .75 24

.0047 950D1C472* .15 .56 24 950D1E472* .24 .75 24

.0068 950D1C682* .16 .56 24 950D1E682* .24 .75 24

.0082 950D1C822* .17 .56 24 950D1E822* .26 .75 24

.010 950D1C103* .19 .56 24 950D1E103* .28 .75 24

.015 950D1C153* .22 .56 24 950D1E153* .35 .75 24

.022 950D1C223* .25 .56 24 950D1E223* .26 1.00 22

.033 950D1C333* .24 .69 24 950D1E333* .32 1.00 22

.047 950D1C473* .28 .69 24 950D1E473* .38 1.00 22

.068 950D1C683* .29 .81 24 950D1E683* .38 1.25 22

.082 950D1C823* .31 .81 24 950D1E823* .41 1.25 22

.10 950D1C104* .34 .81 24 950D1E104* .45 1.25 22

.15 950D1C154* .36 .95 22 950D1E154* .54 1.25 20

.22 950D1C224* .37 1.21 22 950D1E224* .65 1.25 20

.33 950D1C334* .44 1.21 22 950D1E334* .67 1.50 20

.47 950D1C474* .52 1.21 20 950D1E474* .65 2.00 20

.68 950D1C684* .51 1.72 20 950D1E684* .78 2.00 20

.82 950D1C824* .56 1.72 20 950D1E824* .85 2.00 20

1.0 950D1C105* .60 1.72 20 950D1E105* .94 2.00 20

2.0 950D1C205* .77 1.96 20 950D1E205* 1.32 2.00 20

5.0 950D1C505* 1.20 1.96 20 950D1E505* - - -

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. D L (AWG) PART NO. D L (AWG)

POLYPROPYLENE AND FOIL

950D SERIES

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

200 VOLT DC/135 VAC 400 VOLT DC/270 VAC

WRAP AND FILL

ROUND CONFIGURATION

For max. D and L dimensions, allow +.050”. LEAD LENGTH: 2.0” ± .50”

.0010 950D1F102* .25 .75 24 950D1G102* .19 .75 22

.0015 950D1F152* .26 .75 24 950D1G152* .23 .75 22

.0022 950D1F222* .28 .75 24 950D1G222* .27 .75 20

.0033 950D1F332* .32 .75 22 950D1G332* .32 .75 20

.0047 950D1F472* .39.75 22 950D1G472* .38 .75 20

.0068 950D1F682* .33 .9520 950D1G682* .28 1.00 20

.0082 950D1F822* .35 .9520 950D1G822* .30 1.00 20

.010 950D1F103* .34.9520 950D1G103* .33 1.00 20

.015 950D1F153* .44 .9520 950D1G153* .39 1.00 20

.022 950D1F223* .39 1.25 20 950D1G223* .39 1.25 20

.033 950D1F333* .47 1.25 18 950D1G333* .46 1.25 20

.047 950D1F473* .53 1.25 18 950D1G473* .46 1.50 20

.068 950D1F683* .55 1.25 18 950D1G683* .55 1.50 18

.082 950D1F823* .48 1.50 18 950D1G823* .59 1.50 18

.10 950D1F104* .50 1.50 18 950D1G104* .65 1.50 18

.15 950D1F154* .51 1.7518 950D1G154* .79 1.50 18

.22 950D1F224* .62 1.75 18 950D1G224* .94 1.50 18

.33 950D1F334* .73 1.75 18 950D1G334* 1.15 1.50 18

.47 950D1F474* .82 2.0018 950D1G474* 1.36 1.50 18

.68 950D1F684* .95 2.00 18 950D1G684* 1.31 2.00 18

.82 950D1F824* 1.05

.96

2.00 18 950D1G824* 1.42 2.00 18

1.0 950D1F105* 2.50 18 950D1G105* 1.58 2.00 18

2.0 950D1F205* 2.50

18 950D1G205* 1.79 2.75 18

5.0 950D1F505*

1.34

1.90 .00 18 950D1G505* 2.81 2.75 18

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. D L (AWG) PART NO. D L (AWG)

600 VOLT DC/440 VAC 1000 VOLT DC/660 VAC

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)

POLYPROPYLENE AND FOIL

951A SERIES

.0010 951A1C102* .17 .29 .55 26 951A1E102* .29 .42 .67 24

.0015 951A1C152* .17 .29 .55 26 951A1E152* .29 .42 .67 24

.0022 951A1C222* .17 .29 .55 26 951A1E222* .29 .42 .67 24

.0033 951A1C332* .17 .29 .55 26 951A1E332* .29 .42 .67 24

.0047 951A1C472* .17 .29 .55 26 951A1E472* .29 .42 .67 24

.0068 951A1C682* .17 .29 .55 26 951A1E682* .29 .42 .67 24

.0082 951A1C822* .23 .36 .55 26 951A1E822* .29 .42 .67 24

.010 951A1C103* .23 .36 .55 26 951A1E103* .29 .42 .67 24

.015 951A1C153* .23 .36 .55 26 951A1E153* .29 .42 .67 24

.022 951A1C223* .29 .42 .55 24 951A1E223* .39 .54 1.04 22

.033 951A1C333* .29 .42 .67 24 951A1E333* .39 .54 1.04 22

.047 951A1C473* .29 .42 .67 24 951A1E473* .39 .54 1.04 22

.068 951A1C683* .29 .42 .82 24 951A1E683* .39 .54 1.24 22

.082 951A1C823* .39 .54 .82 24 951A1E823* .39 .54 1.24 22

.10 951A1C104* .39 .54 .82 24 951A1E104* .39 .54 1.24 22

.15 951A1C154* .39 .54 1.04 22 951A1E154* .56 .72 1.24 22

.22 951A1C224* .39 .54 1.24 22 951A1E224* .56 .72 1.24 22

.33 951A1C334* .56 .72 1.24 20 951A1E334* .56 .72 1.50 20

.47 951A1C474* .56 .72 1.24 20 951A1E474* .56 .72 1.95 20

.68 951A1C684* .56 .72 1.80 20 951A1E684* - - - -

.82 951A1C824* .56 .72 1.80 20 951A1E824* - - - -

1.0 951A1C105* .56 .72 1.80 20 951A1E105* - - - -

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. T W L (AWG) PART NO. T W L (AWG)

200 VOLT DC/135 VAC 400 VOLT DC/270 VAC

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

EPOXY CASE

RECTANGULAR

CONFIGURATION

For max. T and W dimensions, allow + .010”.

For max. L dimension, allow + .030”. LEAD LENGTH: 2.0” ± .50”

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)

POLYPROPYLENE AND FOIL

952A SERIES

.0010 952A1C102* .18 .30 .55 .400 22 952A1E102* .30 .43 .67 .500 22

.0015 952A1C152* .18 .30 .55 .400 22 952A1E152* .30 .43 .67 .500 22

.0022 952A1C222* .18 .30 .55 .400 22 952A1E222* .30 .43 .67 .500 22

.0033 952A1C332* .18 .30 .55 .400 22 952A1E332* .30 .43 .67 .500 22

.0047 952A1C472* .18 .30 .55 .400 22 952A1E472* .30 .43 .67 .500 22

.0068 952A1C682* .18 .30 .55 .400 22 952A1E682* .30 .43 .67 .500 22

.0082 952A1C822* .18 .30 .55 .400 22 952A1E822* .30 .43 .67 .500 22

.010 952A1C103* .18 .30 .55 .400 22 952A1E103* .30 .43 .67 .500 22

.015 952A1C153* .24 .37 .55 .400 22 952A1E153* .30 .43 .67 .500 22

.022 952A1C223* .30 .43 .55 .400 22 952A1E223* .40 .55 1.04 .800 20

.033 952A1C333* .30 .43 .67 .500 22 952A1E333* .40 .55 1.04 .800 20

.047 952A1C473* .30 .43 .67 .500 22 952A1E473* .40 .55 1.04 .800 20

.068 952A1C683* .30 .43 .82 .600 22 952A1E683* .40 .55 1.24 1.100 20

.082 952A1C823* .40 .55 .82 .600 20 952A1E823* .40 .55 1.24 1.100 20

.10 952A1C104* .40 .55 .82 .600 20 952A1E104* .40 .55 1.24 1.100 20

.15 952A1C154* .40 .55 1.04 .800 20 952A1E154* .57 .73 1.24 1.100 20

.22 952A1C224* .40 .55 1.24 1.100 20 952A1E224* .57 .73 1.24 1.100 20

.33 952A1C334* .57 .73 1.24 1.100 20 952A1E334* .57 .73 1.75 1.600 20

.47 952A1C474* .57 .73 1.24 1.100 20 952A1E474* - - - - -

.68 952A1C684* .57 .73 1.75 1.600 20 952A1E684* - - - - -

.82 952A1C824* .57 .73 1.75 1.600 20 952A1E824* - - - - -

1.0 952A1C105* .57 .73 1.75 1.600 20 952A1E105* - - - - -

DIMENSIONS LEAD DIMENSIONS LEAD

SIZE SIZE

MFD PART NO. T H L S (AWG) PART NO. T H L S (AWG)

200 VOLT DC/135 VAC 400 VOLT DC/270 VAC

*Add tolerance designator to complete part number: F = ±1%, G = ±2%, J = ±5%, K = ±10%, M = ±20%

EPOXY CASE

RECTANGULAR

CONFIGURATION

For max. T, H and L dimensions, allow +.010”.

For max. S dimensions, allow +.015”.

3366 Pomona Blvd. • Pomona, CA 91768 • TEL: (909) 595-4037 • FAX: (909) 595-0186

e-mail: esales@electrocube.com • Internet: www.electrocube.com • (IR: 9/99)