TS4 www.vishay.com Vishay Sfernice Cermet Trimmers, Surface Mount, 4.0 mm Square, Single Turn, Industrial Grade FEATURES * 0.25 W at 70 C * Fully sealed to withstand board washing * Compatible with popular vacuum pick-and-place equipment * J-hook and gull-wing configurations * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (inches) 0.25 mm ( 0.010") TS4YJ 2.30 (0.091) 1 3 Adjustment cross slot 2.45 (0.096) long x 0.510 (0.020) wide 2.35 (0.093) 1.30 (0.051) 2 places 0.800 0.100 (0.031 0.004) 2 places 1.0 (0.040) 3 places 4.50 (0.177) 4.0 (0.157) 5.00 (0.197) 0.200 (0.008) typ. 2.55 (0.100) 2 4.50 (0.177) 1.30 0.100 (0.051 0.004) 2.0 (0.079) 3 places 2.0 (0.079) Recommended PCB footprint 5.00 (0.197) TS4YL 2.30 (0.091) 1 3 5 max. typ. Adjustment cross slot 2.45 (0.096) long x 0.510 (0.020) wide 2.35 (0.093) 0.800 0.100 (0.031 0.004) 2 places 0.600 (0.024) typ. 4.50 (0.177) 1.30 (0.051) 2 places 5.5 (0.217) 6.20 (0.244) 2 4.50 (0.177) 0.200 (0.008) typ. 2.55 (0.100) 1.30 (0.051) 3 places 2.0 (0.079) 1.30 0.100 (0.051 0.004) 0.197 [5.0] Recommended PCB footprint ELECTRICAL SPECIFICATIONS Resistance Range 10 to 2 M (see Standard Resistance table) Tolerance End Resistance 20 % standard 1 % or 2 maximum, whichever is greater Temperature Coefficient Power Rating 100 ppm/C 0.25 W at + 70 C (300 V maximum), 0 W at + 125 C Wiper 2 Circuit Diagram 1 3 ccw cw Clockwise Contact Resistance Variation (CRV) Resolution Insulation Resistance (500 VDC) Dielectric Strength (RMS) Adjustment Angle Revision: 05-Aug-13 1 % or 3 Infinite 100 M minimum Sea level 500 VAC (1 minute) 210 nominal Document Number: 51053 1 For technical questions, contact: sferpottrimmers@vishay.com, see also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS4 www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical Angle 240 nominal Operating Torque (Typical) 1.8 Ncm End Stop Torque (Typical) 3.0 Ncm Weight Approximately 0.01 oz. Wiper Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range - 55 C to + 125 C MSL Level 1 PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS RT/RT (%) V1-2/V1-3 (%) OTHER Vibration 20 g's 1% 1% - Shock 100 g's 1% 1% - Electrical Endurance At 70 C rated power 1000 h 3% - Mechanical Endurance 100 cycles 3% - - Change of Temperature 5 cycles 2% 1% - 90 % to 98 % relative humidity 10 cycles, 240 h 2% - Insulation resistance:10 M Humidity SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029 STANDARD RESISTANCE ELEMENT DATA TWO DIGIT DATE CODE YEAR 1990 A 2000 M 2010 A 1991 B 2001 N 2011 B 1992 C 2002 P 2012 C 1993 D 2003 R 2013 D 1994 E 2004 S 2014 E 1995 F 2005 T 2015 F 1996 H 2006 U 2016 H 1997 J 2007 V 2017 J 1998 K 2008 W 2018 K 1999 L 2009 X 2019 L MONTH January 1 July 7 February 2 August 8 March 3 September 9 April 4 October O May 5 November N June 6 December D RESISTANCE RESISTANCE CODE 10 100 20 200 50 500 100 101 200 201 500 501 1K 102 2K 202 5K 502 10K 103 20K 203 50K 503 100K 104 200K 204 500K 504 1M 105 2M 205 TYPICAL TCR (ppm/C) 100 Note * Special resistance available Revision: 05-Aug-13 Document Number: 51053 2 For technical questions, contact: sferpottrimmers@vishay.com, see also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS4 www.vishay.com Vishay Sfernice PART MARKING Resistance code 203 - Manufacturers code - Resistance code - Date code J5 Year Month Date code PACKAGING in millimeters (inches) TS4YJ, TS4YL Tape TS4YJ, TS4YL Reel 0.360 (0.014) max. 2.74 0.100 (0.108 0.004) 1.78 0.254 (0.070 0.010) equal spaced 21.01 0.787 13.0 0.508 3 places (0.827 0.031) (0.512 0.020) dia. dia. 5.52 0.5 (0.217 0.020) 4.00 0.100 2.00 0.050 (0.157 0.004) (0.079 0.002) 1.75 0.100 (0.069 0.004) 2.67 0.254 (0.105 0.010) 1.50 + 0.100 - 0 (0.059 + 0.004 - 0) 59.18 2.03 (2.33 0.80) 5.26 0.100 (YJ) (0.207 0.004) 12.0 0.300 (0.472 0.012) 12.4 + 2.01 - 0 177.8 2.03 (0.488 + 0.079 - 0) (7.0 0.080) dia. 500 pieces per 7" reel standard. Meets EIA Specifications 481. 5.26 0.100 6.45 0.100 (YL) (0.207 0.004) (0.254 0.004) 8.0 0.200 (0.315 0.008) ORDERING INFORMATION (Part Number) T S 4 Y L 5 0 2 M R 1 0 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING TS4 YJ YL From 10 to 2 M 502 = 5 k M = 20 % R10 = Reel 500 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) TS4 YL 5K 20 % MODEL STYLE VALUE TOLERANCE Revision: 05-Aug-13 SPECIAL TR e3 PACKAGING LEAD FINISH Document Number: 51053 3 For technical questions, contact: sferpottrimmers@vishay.com, see also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000