TS4
www.vishay.com Vishay Sfernice
Revision: 05-Aug-13 1Document Number: 51053
For technical questions, contact:
sferpottrimmers@vishay.com
, see also Application Note:
www.vishay.com/doc?51001
and
www.vishay.com/doc?52029
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Cermet Trimmers, Surface Mount, 4.0 mm Square, Single Turn,
Industrial Grade
FEATURES
• 0.25 W at 70 °C
• Fully sealed to withstand board washing
• Compatible with popular vacuum
pick-and-place equipment
• J-hook and gull-wing configurations
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters (inches) ± 0.25 mm (± 0.010")
TS4YJ
TS4YL
ELECTRICAL SPECIFICATIONS
Resistance Range 10 to 2 M (see Standard Resistance table)
Tolerance ± 20 % standard
End Resistance 1 % or 2 maximum, whichever is greater
Temperature Coefficient ± 100 ppm/°C
Power Rating 0.25 W at + 70 °C (300 V maximum), 0 W at + 125 °C
Circuit Diagram
Contact Resistance Variation (CRV) 1 % or 3
Resolution Infinite
Insulation Resistance (500 VDC)100 M minimum
Dielectric Strength (RMS) Sea level 500 VAC (1 minute)
Adjustment Angle 210° nominal
Recommended PCB footprint
2.30 (0.091)
1.30 (0.051)
2 places
4.0
(0.157)
2.0 (0.079)
3 places
2.0
(0.079)
2.35 (0.093)
0.800 ± 0.100
(0.031 ± 0.004)
2 places
1.0 (0.040)
3 places
0.200 (0.008)
typ.
Adjustment cross slot
2.45 (0.096) long
x 0.510 (0.020) wide
2
3
1
4.50
(0.177)
4.50
(0.177)
2.55
(0.100)
5.00
(0.197)
5.00
(0.197)
1.30 ± 0.100
(0.051 ± 0.004)
Recommended PCB footprint
2.30 (0.091)
1.30 (0.051)
2 places
5.5
(0.217)
2.0
(0.079)
1.30 (0.051)
3 places
Adjustment cross slot
2.45 (0.096) long
x 0.510 (0.020) wide
2
3
1
4.50
(0.177)
4.50
(0.177)
0.200 (0.008)
typ.
0.600 (0.024)
typ.
5° max.
typ. 0.800 ± 0.100
(0.031 ± 0.004)
2 places
6.20
(0.244)
0.197
[5.0]
1.30 ± 0.100
(0.051 ± 0.004)
2.55
(0.100)
2.35
(0.093)
cw
2
1 3
Wiper
Clockwise
ccw
TS4
www.vishay.com Vishay Sfernice
Revision: 05-Aug-13 2Document Number: 51053
For technical questions, contact:
sferpottrimmers@vishay.com
, see also Application Note:
www.vishay.com/doc?51001
and
www.vishay.com/doc?52029
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Special resistance available
MECHANICAL SPECIFICATIONS
Mechanical Angle 240° nominal
Operating Torque (Typical) 1.8 Ncm
End Stop Torque (Typical) 3.0 Ncm
Weight Approximately 0.01 oz.
Wiper Positioned at approx. 50 %
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 55 °C to + 125 °C
MSL Level 1
PERFORMANCES
TESTS CONDITIONS TYPICAL VALUES AND DRIFTS
RT/RT (%) V1-2/V1-3 (%) OTHER
Vibration 20 g’s ± 1 % ± 1 % -
Shock 100 g’s ± 1 % ± 1 % -
Electrical Endurance At 70 °C rated power 1000 h ± 3 % - -
Mechanical Endurance 100 cycles ± 3 % - -
Change of Temperature 5 cycles ± 2 % ± 1 % -
Humidity 90 % to 98 % relative humidity
10 cycles, 240 h ± 2 % - Insulation resistance:10 M
SOLDERING RECOMMENDATIONS
Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029
TWO DIGIT DATE CODE
YEAR
1990 A 2000 M 2010 A
1991 B 2001 N 2011 B
1992 C 2002 P 2012 C
1993 D 2003 R 2013 D
1994 E 2004 S 2014 E
1995 F 2005 T 2015 F
1996 H 2006 U 2016 H
1997 J 2007 V 2017 J
1998 K 2008 W 2018 K
1999 L 2009 X 2019 L
MONTH
January 1 July 7
February 2 August 8
March 3 September 9
April 4 October O
May 5 November N
June 6 December D
STANDARD RESISTANCE ELEMENT DATA
RESISTANCE
RESISTANCE
CODE
TYPICAL TCR
(ppm/°C)
10 100
± 100
20 200
50 500
100 101
200 201
500 501
1K 102
2K 202
5K 502
10K 103
20K 203
50K 503
100K 104
200K 204
500K 504
1M 105
2M 205
TS4
www.vishay.com Vishay Sfernice
Revision: 05-Aug-13 3Document Number: 51053
For technical questions, contact:
sferpottrimmers@vishay.com
, see also Application Note:
www.vishay.com/doc?51001
and
www.vishay.com/doc?52029
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PART MARKING
- Manufacturers code
- Resistance code
- Date code
PACKAGING in millimeters (inches)
ORDERING INFORMATION (Part Number)
MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL
NUMBER
TS4 YJ
YL
From 10 to 2 M
502 = 5 k
M = ± 20 % R10 =
Reel 500 pieces
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
TS4 YL 5K 20 % TR e3
MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH
Year Month
Date code
Resistance
code
203 J5
TS4YJ, TS4YL
Tape 2.74 ± 0.100
(0.108 ± 0.004)
0.360 (0.014)
max.
5.52 ± 0.5
(0.217 ± 0.020)
1.75 ± 0.100
(0.069 ± 0.004)
2.00 ± 0.050
(0.079 ± 0.002)
4.00 ± 0.100
(0.157 ± 0.004)
1.50 + 0.100 - 0
(0.059 + 0.004 - 0)
5.26 ± 0.100 (YJ)
(0.207 ± 0.004)
6.45 ± 0.100 (YL)
(0.254 ± 0.004)
5.26 ± 0.100
(0.207 ± 0.004)
8.0 ± 0.200
(0.315 ± 0.008)
12.0 ± 0.300
(0.472 ± 0.012)
TS4YJ, TS4YL
Reel
500 pieces per 7" reel standard. Meets EIA Specifications 481.
13.0 ± 0.508
(0.512 ± 0.020)
dia.
1.78 ± 0.254
(0.070 ± 0.010)
equal spaced
3 places 21.01 ± 0.787
(0.827 ± 0.031)
dia.
2.67 ± 0.254
(0.105 ± 0.010)
59.18 ± 2.03
(2.33 ± 0.80)
12.4 + 2.01 - 0
(0.488 + 0.079 - 0)
177.8 ± 2.03
(7.0 ± 0.080)
dia.
1050 M2RLYTS4
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
