1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 Available on commercial versions 1 Amp Schottky Barrier Rectifiers Qualified per MIL-PRF-19500/586 Qualified Levels*: JAN, JANTX, JANTXV and JANS DESCRIPTION This 1 Amp Schottky barrier rectifier is metallurgically bonded and offers military grade qualifications for the part numbers of 1N5819-1 and 1N6761-1 for high-reliability applications. This small diode is hermetically sealed and bonded into a DO-41 glass package. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * JEDEC registered 1N5818, 1N5819 and 1N6759 through 1N6761 numbers. * Hermetically sealed DO-41 glass package. DO-41 Package * Metallurgically bonded. * *1N5819-1 and 1N6761-1 only are available in JAN, JANTX, JANTXV and JANS qualifications per MIL-PRF-19500/586. (See part nomenclature for all available options.) * Also available in: DO-213AB package (surface mount) 1N5819UR-1, 1N6761UR-1 and CDLL variants RoHS compliant versions available (commercial grade only). APPLICATIONS / BENEFITS * * * * Small size for high density mounting using flexible thru-hole leads (see package illustration). Low reverse (leakage) currents. Non-sensitive to ESD per MIL-STD-750 test method 1020 (human body model). Inherently radiation hard as described in Microsemi "MicroNote 050". MAXIMUM RATINGS @ T A = +25 C unless otherwise specified Parameters/Test Conditions Storage Temperature Junction Temperature 1N5819-1 1N6761-1 Symbol T STG TJ Thermal Resistance, Junction-to-Lead @ lead length = 0.375 inch (9.52 mm) from body Thermal Resistance, Junction-to-Ambient (1) Average Rectified Output Current Surge Peak Forward Current Solder Temperature @ 10 s R JL Value -65 to +150 -65 to +125 -65 to +150 70 Unit C C 220 1.0 25 260 C/W A A o C R JA IO I FSM NOTE: 1. T L = 45C for the 1N5819-1 and T L = 55C for the 1N6761-1. C/W MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Page 1 of 6 1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 MECHANICAL and PACKAGING * * * * * * * CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Tin/lead or RoHS compliant matte/tin (commercial grade only) over copper. MARKING: Body coated in blue with part number. POLARITY: Cathode indicated by band. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: Approximately 340 milligrams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N5819 -1 (e3) Reliability Level JAN = JAN level* JANTX = JANTX level* JANTXV = JANTXV level* JANS = JANS level* RoHS Compliance e3 = RoHS compliant (on commercial grade only) Blank = non-RoHS compliant *(applicable only to 1N5819-1 and 1N6761-1 numbers) Metallurgically Bonded Blank = Commercial grade JEDEC type number (see Electrical Characteristics table) DSB 1A 20 (e3) Diode Schottky Barrier RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Amp Rating Working Peak Reverse Voltage Rating (V RWM ) SYMBOLS & DEFINITIONS Definition Symbol CT f I FSM IR IO V (BR) Total Capacitance: The total small signal capacitance between the diode terminals of a complete device. frequency Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B) Reverse Current: The dc current flowing from the external circuit into the cathode terminal at the specified voltage V R . Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. VF Forward Voltage: The positive anode-cathode voltage the device will exhibit at a specified I F current. VR Reverse Voltage: The dc voltage applied in the reverse direction below the breakdown region. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV. V RWM T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Page 2 of 6 1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 *ELECTRICAL CHARACTERISTICS @ T A = 25 C unless otherwise specified TYPE NUMBER 1N5818-1* 1N5819-1 1N6759-1 1N6760-1 1N6761-1 DSB1A20 DSB1A30 DSB1A40 DSB1A50 DSB1A60 DSB1A80 DSB1A100 WORKING PEAK REVERSE (1) VOLTAGE V RWM Volts 30 45 60 80 100 20 30 40 50 60 80 100 MAXIMUM FORWARD VOLTAGE V F @ 0.1A Volts 0.36 0.34 0.38 0.38 0.38 0.36 0.36 0.36 0.36 0.38 0.38 0.38 V F @ 1.0 A Volts 0.60 0.49 0.69 0.69 0.69 0.60 0.60 0.60 0.60 0.69 0.69 0.69 CT pF 0.9 0.8 NA NA NA 0.9 0.9 0.9 0.9 NA NA NA MAXIMUM REVERSE LEAKAGE CURRENT AT RATED VOLTAGE I RM @ 25C mA 0.10 0.05 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 I RM @ 100C mA 5.0 5.0 6.0 6.0 12.0 5.0 5.0 5.0 5.0 12.0 12.0 12.0 MAXIMUM CAPACITANCE @ VR = 5 VOLTS f 1.0 MHz CT pF 70 70 *This part number may also be ordered through the number of DSB5818. Also available with JAN, JANTX, JANTXV, and JANS military qualifications. T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Page 3 of 6 1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 IR, Reverse Current (mA) GRAPHS T J , Junction Temperature (C) IF, Forward Current, Instantaneous (Amps) FIGURE 1 Typical Reverse Leakage Current at Rated PIV (PULSED) V F , Forward Voltage, Instantaneous (Volts) FIGURE 2 Typical Forward Voltage for 1N5819-1 T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Page 4 of 6 1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 Theta (C/W) GRAPHS (continued) Time (s) FIGURE 3 Thermal impedance for 1N5819-1 and 1N6761-1 (DO-41) T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Page 5 of 6 1N5818-1, 1N5819-1, 1N6759-1 - 1N6761-1 and DSB1A20 - DSB1A100 PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. Millimeters are given for information only. 2. Package contour optional with BD and length BL. Slugs, if any, shall be included within this cylinder length but shall not be subject to minimum limit of BD. 3. Lead diameter not controlled in this zone to allow for flash, lead finish build-up, and minor irregularities other than slugs. 4. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. T4-LDS-0301, Rev. 1 (6/25/13) (c)2013 Microsemi Corporation Ltr BD BL LD LL LU DIMENSIONS INCH MILLIMETERS Min Max Min Max 0.080 0.107 2.03 2.72 0.160 0.205 4.06 5.21 0.028 0.034 0.71 0.86 1.000 25.40 0.050 1.27 Notes 2 2 3 Page 6 of 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: 1N5819-1 JANTX1N5819-1 DSB1A20 DSB1A50 DSB1A80 DSB1A40 1N6761-1 DSB1A100 DSB1A60 DSB1A30