SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5000 SERIES - MINIATURE TOGGLE SWITCHES A FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, 3PDT & 4PDT models with numerous options. Numerous configurations for panel, panel & p.c. and p.c. mounting. Extensive agency recognition (see below). SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30 VDC Gold plated silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plating withstands up to 100 mA at 30 VDC. 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 1500 V rms min. - between poles and terminals and frame Gold: 100,000 cycles min. Silver (at full load): SP & DP - 50,000 cycles min. 3P: 40,000 cycles min. 4P: 30,000 cycles min. -40C to +85C MATERIALS Contacts & Terminals: Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Gold plated brass, silver or gold plated silver Chrome plated brass Nickel plated brass Stainless steel or tin plated steel Diallyl phthalate (DAP) Epoxy Panel mounting models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION UL, CSA, CECC, LNZ, GAM T1, QPL (Europe), MUAHAG, NATO. Availability: Consult factory for details of recognized models. Marking: To order switches marked UL, CSA or CECC, complete the appropriate box of the ordering format. Other listings do not appear on the switches. ABOUT THIS SERIES ALSO IN THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models: Panel mounting Panel and/or p.c. mounting P.C. mounting b. 'build your own switch' order format c. Option drawings & special options d. Panel cut-outs & miscellaneous 5000 Series switches for peak currents for switching power supplies, DC-DC converters, motors, etc. See specifications on last page of completely specified models. VDE approved 5000 Series models see 55000 Series following. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 23 10/6/00, 6:39 AM A23 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 II I 1-2 EPOXY 7.00 (.275) 1.00 (.039) 12.00 (.472) 3.70 (.145) I 3 24 II 2 III 1 0.80 (.031) 10.50 8.00 (.413) (.314) III 2-3 5-6 II I 1-2 4-5 EPOXY 12.00 (.472) 12.00 (.472) 1.00 (.039) 3.70 (.145) II 24 I III * Function 4: SP in DP case. see diagram at end of section 6 2 5 1 4 0.80 (.031) 10.50 8.00 (.413) (.314) 3 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM 4.75 (.187) OFF OFF OFF ON ON ON 1.80 (.070) ON ON MOM ON ON ON ON MOM 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5646AB 5649AB 5647AB 5648AB 5642AB 5644THAB* 5644TH1RAB* 5644TH2RAB* Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts III 2-3 5-6 8-9 II I 1-2 4-5 7-8 1.80 (.070) EPOXY 16.50 (.649) 1.00 (.039) 13.10 (.516) 3.70 (.145) I II III 9 2 8 1 7 0.80 (.031) 10.50 8.00 (.413) (.314) 3 4.70 (.185) ON ON MOM MOM MOM 4.75 (.187) OFF OFF OFF - 0.50 (.019) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5656AB 5659AB 5657AB 5658AB 5652AB Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts A24 A23-A40 1.80 (.070) 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) EPOXY I II 3.70 (.145) III 10.50 8.00 (.413) (.314) 9 12 8 11 7 10 4.70 (.185) 1.00 (.039) 13.10 (.516) 0.50 (.019) Keyway 0.80 (.031) CIRCUIT ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON MOM ON ON ON ON ON MOM 21.20 (.834) MOM ON MOM III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 * Function 4: SP in DP case. see diagram at end of section. 13.20 (.519) 5666AB 5669AB 5667AB 5668AB 5662AB 5664THAB* 5664TH1RAB* 5664TH2RAB* Handle position Terminals connected: 24 MODEL NO. 3.00 DIA (.118 DIA) Four pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals -silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 24 10/6/00, 6:40 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM 4.70 (.185) OFF OFF OFF - 1.80 (.070) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5636AB 5639AB 5637AB 5638AB 5632AB Handle position (see dwg.) : Terminals connected Keyway CIRCUIT 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A 7.00 (.275) 1.00 (.039) 1-2 12.00 (.472) I 13.20 (.519) 3.70 (.145) II 3 III 2 1 4.70 (.185) I Epoxy 0.50 (.019) II 8.00 (.314) 11.40 (.448) 0.80 (.031) ON ON MOM MOM MOM 24 OFF OFF OFF - 2.54 (.100) 5636AB9 ON 5639AB9 ON 5637AB9 MOM 5638AB9 ON 5632AB9 ON Handle position (see dwg.) : III Terminals connected 2-3 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) Keyway CIRCUIT 12.00 (.472) 1.00 (.039) Epoxy 12.00 (.472) I II 4.75 (.187) 1.80 (.070) 11.40 8.00 (.448) (.314) 3.70 (.145) III * Function 4: SP in DP case. see diagram at end of section. 3 6 2 5 1 4 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) ON ON MOM ON ON ON ON MOM III 2-3 5-6 6.35 DIA-40UNS (1/4-40UNS) 24 5646AB9 5649AB9 5647AB9 5648AB9 5642AB9 5644THAB9* 5644TH1RAB9* 5644TH2RAB9* Handle position: Terminals connected: Keyway CIRCUIT 2.54 (.100) MODEL NO. 5.00 DIA (.196 DIA) Double pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 13.20 (.519) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 5.00 DIA (.196 DIA) Single pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts I 1-2 4-5 7-8 16.50 (.649) 1.00 (.039) 1.80 (.070) Epoxy 13.10 (.516) 3.70 (.145) I II III 3 9 2 8 1 7 4.70 (.185) II 4.75 (.187) III 2-3 5-6 8-9 11.40 8.00 (.448) (.314) 0.50 (.019) ON ON MOM MOM MOM 0.80 (.031) OFF OFF OFF - 24 ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 2.54 (.100) 5656AB9 5659AB9 5657AB9 5658AB9 5652AB9 Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 13.20 (.519) MODEL NO. 5.00 DIA (.196 DIA) Three pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) 11.40 8.00 (.448) (.314) 3.70 (.145) 0.50 (.019) 1.00 (.039) I * Function 4: SP in DP case. see diagram at end of section. II III 9 12 8 11 7 10 4.70 (.185) 21.20 (.834) Epoxy 13.10 (.516) 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 24 OFF OFF OFF ON ON ON II 1.80 (.070) Keyway CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 2.54 (.100) 5666AB9 5669AB9 5667AB9 5668AB9 5662AB9 5664THAB9* 5664TH1RAB9* 5664TH2RAB9* Handle position Terminals connected: 13.20 (.519) MODEL NO. 5.00 DIA (.196 DIA) Four pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 25 10/6/00, 6:40 AM A25 5000 SERIES - MINIATURE TOGGLE SWITCHES A Single pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts II I 13.10 (.515) 7.00 (.275) 5.30 (.208) 1.00 (.039) 2 II 24 III 1 1-2 3 I 2-3 10.50 (.413) 8.00 (.314) EPOXY Double pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts 13.10 (.515) 12.00 (.472) 5.30 (.208) 4.70 (.185) 1.00 (.039) 3 I 2 III 10.50 (.413) * Function 4: SP in DP case. see diagram at end of section. 1 II 4.75 (.187) 1.57 (.061) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 8.00 (.314) EPOXY 0.78 (.030) OFF OFF OFF ON ON ON II 6.35 DIA-40UNS (1/4-40UNS) 3.00 DIA (.118 DIA) ON ON MOM ON ON ON ON MOM III 2-3 5-6 Keyway 24 5246ZA 5249ZA 5247ZA 5248ZA 5242ZA 5244THZA* 5244TH1RZA* 5244TH2RZA* Handle position Terminals connected: CIRCUIT 13.20 (.519) MODEL NO. ON ON MOM ON ON OFF OFF OFF - ON ON MOM MOM MOM III II I I 1-2 II Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 7.00 (.275) 3.70 (.145) 0.50 (.019) 11.00 (.433) 3 13.20 (.519) 2-3 Keyway 24 5636MAB 5639MAB 5637MAB 5638MAB 5632MAB Handle position (see dwg.) : Terminals connected: CIRCUIT 5.00 DIA (.196 DIA) MODEL NO. 1.80 (.070) Single pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 2 0.80 (.031) 17.50 (.688) 4.70 (.185) 1 III 11.90 (.468) A26 A23-A40 4.75 (.187) Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 11.00 (.433) 3.70 (.145) I II III 17.50 (.688) 11.90 (.468) 12.00 (.472) 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. Keyway 13.20 (.519) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) ON ON MOM ON ON ON ON MOM III 2-3 5-6 24 5646MAB 5649MAB 5647MAB 5648MAB 5642MAB 5644MTHAB* 5644MTH1RAB* 5644MTH2RAB* Handle position Terminals connected: CIRCUIT 5.00 DIA (.196 DIA) MODEL NO. 1.80 (.070) Double pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 26 10/6/00, 6:40 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE III 1.57 (.061) ON ON MOM MOM MOM 4.70 (.185) OFF OFF OFF - 6.35 DIA-40UNS (1/4-40UNS) 0.78 (.030) ON ON MOM ON ON 13.20 (.519) 5236ZA 5239ZA 5237ZA 5238ZA 5232ZA Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 3.00 DIA (.118 DIA) MODEL NO. 5000 SERIES - MINIATURE TOGGLE SWITCHES A I 1-2 4-5 7-8 11.9 DIA-32UNS (15/32-32UNS) 12.10 (.476) 3.70 (.145) I II 16.50 (.649) 17.50 (.688) 9 2 8 1 7 0.80 (.031) III 3 4.70 (.185) II Epoxy terminal seal is standard on these models. 13.20 (.519) III 2-3 5-6 8-9 4.75 (.187) ON ON MOM MOM MOM 0.50 (.019) OFF OFF OFF - Keyway 24 ON ON MOM ON ON 5.00 DIA (.196 DIA) 5656MAB 5659MAB 5657MAB 5658MAB 5652MAB Handle position (see dwg.) : Terminals connected: CIRCUIT 11.90 (.468) Keyway Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 12.10 (.476) 3.70 (.145) I II 21.20 (.834) 13.20 (.519) III 17.50 (.688) 3 12 2 11 1 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 0.50 (.019) OFF OFF OFF ON ON ON II 4.75 (.187) CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 0.80 (.031) 5666MAB 5669MAB 5667MAB 5668MAB 5662MAB 5664MTHAB* 5664MTH1RAB* 5664MTH2RAB* Handle position Terminals connected: 24 MODEL NO. 1.80 (.070) Four pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 5.00 DIA (.196 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 1.80 (.070) Three pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 11.90 (.468) * Function 4: SP in DP case. see diagram at end of section. III OFF OFF OFF II ON ON MOM MOM MOM 6.35 DIA-40UNS (1/4-40UNS) 7.00 (.275) 1.80 (.070) Keyway CIRCUIT ON ON MOM ON ON 1.00 (.039) 12.00 (.472) 3.70 (.145) 1-2 II 3 24 I 2-3 Epoxy terminal seal is standard on these models. I 13.20 (.519) 5636AKB 5639AKB 5637AKB 5638AKB 5632AKB Handle position (see dwg.) : Terminals connected: 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts 2 III 0.80 (.031) 8.00 (.314) 4.70 (.185) 1 10.50 (.413) 12.00 (.472) 1.00 (.039) I II 12.00 (.472) III 10.50 (.413) 8.00 (.314) 4.75 (.187) 3.70 (.145) Epoxy terminal seal is standard on these models. 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) Keyway CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 24 5646AKB 5649AKB 5647AKB 5648AKB 5642AKB 5644THAKB* 5644TH1RAKB* 5644TH2RAKB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 27 10/6/00, 6:40 AM A27 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 5-6 8-9 II I 1-2 4-5 7-8 16.50 (.649) 1.00 (.039) 13.10 (.516) 3.70 (.145) I II III 8 1 7 0.80 (.031) 8.00 (.314) 9 2 4.70 (.185) 10.50 (.413) 3 Epoxy terminal seal is standard on these models. 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) 21.20 (.834) 1.00 (.039) 13.10 (.516) 3.70 (.145) 0.50 (.019) I II III 10.50 (.413) 8.00 (.314) * Function 4: SP in DP case. see diagram at end of section. 9 12 8 11 7 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 0.80 (.031) OFF OFF OFF ON ON ON II 24"" 24 ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 3.00 DIA (.118 DIA) Keyway CIRCUIT 5666AKB 5669AKB 5667AKB 5668AKB 5662AKB 5664THAKB* 5664TH1RAKB* 5664TH2RAKB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. 1.80 (.070) Four pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts Single pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts ON - ON ON - ON ON OFF ON III II I 5636AB-2V 9.00 (.354) 2 locked positions 2-3 1-2 3V 12.00 (.472) 5639AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 3 locked positions 0.50 (.019) 0.80 (.031) 14.85 (.584) 5636AB-1V 14.75 (.580) 1 locked position 15.10 (.594) CIRCUIT 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. Epoxy 1V Keyway Double pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts ON - ON ON - ON ON OFF ON III 2-3 5-6 II I 1-2 4-5 2 locked positions 5646AB-2V 0.50 (.019) 0.80 (.031) Epoxy Keyway A28 A23-A40 3V 12.00 (.472) 3.70 (.145) 5649AB-3V Handle position (see dwg.) : Terminals connected: 9.00 (.354) 3 locked positions 4.75 (.187) 14.85 (.584) 5646AB-1V 14.75 (.580) 1 locked position 15.10 (.594) CIRCUIT 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 1V APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 28 10/6/00, 6:40 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM Epoxy terminal seal is standard on these models. 4.75 (.187) OFF OFF OFF - 0.50 (.019) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5656AKB 5659AKB 5657AKB 5658AKB 5652AKB Handle position (see dwg.) : Terminals connected: 1.80 (.070) Keyway CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A Three pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts CIRCUIT ON - ON ON - ON ON OFF ON III 2-3 5-6 8-9 II I 1-2 4-5 7-8 9.00 (.354) 5656AB-2V 3 locked positions 3V 13.00 (.511) 5659AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 0.80 (.031) 0.50 (.019) 4.75 (.187) Epoxy Keyway 1V Four pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts CIRCUIT ON - ON ON - ON ON OFF ON III 2-3 5-6 8-9 11-12 II I 1-2 4-5 7-8 10-11 2 locked positions 5666AB-2V 3V 13.00 (.511) 5669AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 3 locked positions 0.80 (.031) 0.50 (.019) 4.75 (.187) Epoxy 14.85 (.584) 5666AB-1V 14.75 (.580) 1 locked position 15.10 (.594) 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 9.00 (.354) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2 locked positions 14.85 (.584) 5656AB-1V 14.75 (.580) 1 locked position 15.10 (.594) 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 1V Keyway II ON ON MOM MOM MOM 4.70 (.185) 7.00 (.275) 1.00 (.039) 13.30 (.523) 4.00 (.157) I Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. II 3 2 III 1 10.50 (.413) 8.00 (.314) 0.80 (.031) 1-2 24 I 2-3 1.60 DIA (.063 DIA) 4.70 (.185) III OFF OFF OFF - 6.35 DIA-40UNS (1/4-40UNS) 1.10 (.043) ON ON MOM ON ON Epoxy terminal seal is standard on these models. 13.20 (.519) 5236CDB 5239CDB 5237CDB 5238CDB 5232CDB Handle position (see dwg.) : Terminals connected: CIRCUIT 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts Keyway Double pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts 6.35 DIA-40UNS (1/4-40UNS) 4.75 (.187) 4.75 (.187) 12.00 (.472) I II 13.30 (.523) III 10.50 (.413) 8.00 (.314) Keyway 4.70 (.185) 4.00 (.157) 0.50 (.019) 1.00 (.039) 1.60 DIA (.063 DIA) 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. Epoxy terminal seal is standard on these models. 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 24 OFF OFF OFF ON ON ON II 1.10 (.043) CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 3.00 DIA (.118 DIA) 5246CDB 5249CDB 5247CDB 5248CDB 5242CDB 5244THCDB* 5244TH1RCDB* 5244TH2RCDB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 29 10/6/00, 6:40 AM A29 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 5-6 8-9 II I 1-2 4-5 7-8 Epoxy terminal seal is standard on these models. 16.50 (.649) 4.75 (.187) 1.10 (.043) 14.40 (.567) 1.00 (.039) 4.70 (.185) 4.00 (.157) I II Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. III 8.00 (.314) 3 9 2 8 1 7 4.70 (.185) 0.80 (.031) 10.50 (.413) 1.60 DIA (.063 DIA) 1.60 DIA (.063 DIA) 4.75 (.187) Epoxy terminal seal is standard on these models. 4.70 (.185) 4.75 (.187) 21.20 (.834) I II 4.00 (.157) 14.40 (.567) 1.00 (.039) 0.50 (.019) III 10.50 (.413) * Function 4: SP in DP case. see diagram at end of section. 8.00 (.314) 9 12 8 11 7 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 24 OFF OFF OFF ON ON ON II 6.35 DIA-40UNS (1/4-40UNS) 0.80 (.031) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 3.00 DIA (.118 DIA) 5266CDB 5269CDB 5267CDB 5268CDB 5262CDB 5264THCDB* 5264TH1RCDB* 5264TH2RCDB* Handle position Terminals connected: 13.20 (.519) MODEL NO. Keyway 1.10 (.043) Four pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terms. - gold or silver contacts 2-3 0.60 (.023) 13.10 (.515) 7.00 (.275) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 5.08 (.200) I 1-2 16.90 (.665) 1.00 (.039) I 3 II ON ON MOM MOM MOM II 2 III OFF OFF OFF - III 10.50 (.413) 8.00 (.314) EPOXY Keyway 0.60 1 (.023) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5236MIWRCD 5239MIWRCD 5237MIWRCD 5238MIWRCD 5232MIWRCD Handle position (see dwg.) : Terminals connected: 5.08 (.200) 1.10 DIA (.043 DIA) CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts A30 A23-A40 0.60 (.023) 13.10 (.515) 12.00 (.472) 16.90 (.665) 5.08 (.200) 1.00 (.039) II 3 I 2 ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 6.35 DIA-40UNS (1/4-40UNS) III * Function 4: SP in DP case. see diagram at end of section. 10.50 (.413) Keyway 8.00 (.314) EPOXY 0.60 1 (.023) OFF OFF OFF ON ON ON II 5.08 (.200) 24 ON ON MOM ON ON ON ON MOM III 2-3 5-6 5.08 (.200) 5246MIWRCD 5249MIWRCD 5247MIWRCD 5248MIWRCD 5242MIWRCD 5244MIWRTHCD* 5244MIWRTH1RCD* 5244MIWRTH2RCD* Handle position: Terminals connected: Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 1.10 DIA (.043 DIA) CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 30 10/6/00, 6:41 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM 4.75 (.187) OFF OFF OFF - 0.50 (.019) CIRCUIT ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5256CDB 5259CDB 5257CDB 5258CDB 5252CDB Handle position (see dwg.) : Terminals connected: Keyway 24 MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A Single pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts I III II I 2-3 2.67 DIA (.105) 3 2 0.50 (.019) 1-2 Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 5.08 (.196) 4.70 (.185) 12.70 (.500) ON ON MOM MOM MOM 7.40 (.291) OFF OFF OFF - III 12.70 (.500) ON ON MOM ON ON II 24 11.00 7.20 7.30 (.433) (.283) (.287) 5236WCDB16X404 5239WCDB16X404 5237WCDB16X404 5238WCDB16X404 5232WCDB16X404 Handle position (see dwg.) : Terminals connected: 6.25 DIA (.246 DIA) CIRCUIT 1 Epoxy 7.00 (.275) 0.80 (.031) 1.60 DIA (.062 DIA) 4.70 (.185) Double pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts 6.25 DIA (.246 DIA) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 2.67 DIA (.105) 1.60 DIA (.062 DIA) 3 2 0.50 (.019) 6 1 Epoxy 0.80 (.031) 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. 5.08 (.196) 3.81 12.70 (.150) (.500) OFF OFF OFF ON ON ON II III 7.40 (.291) ON ON MOM ON ON ON ON MOM III 2-3 5-6 II 24 12.70 (.500) 5246WCDB16X404 5249WCDB16X404 5247WCDB16X404 5248WCDB16X404 5242WCDB16X404 5244WTHCDB16X404* 5244WTH1RCDB16X404* 5244WTH2RCDB16X404* Handle position: Terminals connected: I 4.70 (.185) 3 3.81 (.150) MODEL NO. 11.00 7.20 7.30 (.433) (.283) (.287) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 12.00 (.472) Three pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts II I 1-2 4-5 7-8 16.60 (.653) 14.35 (.564) 1.60 DIA (.062 DIA) 3.81 (.150) 4.70 (.185) 8.50 6.00 12.5 (.334) (.236) (.492) 3.70 (.145) 7 III 4 5 II 24 I 0.80 (.031) 1.00 (.039) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 7.20 (.283) 4.70 (.185) III 2-3 5-6 8-9 1.10 (.043) 0.50 (.019) ON ON MOM MOM MOM 2.67 DIA (.105 DIA) OFF OFF OFF - 6.25 DIA (.246 DIA) ON ON MOM ON ON 3.81 14.35 (.150) (.564) Epoxy 13.20 (.519) 5256WCDB16 5259WCDB16 5257WCDB16 5258WCDB16 5252WCDB16 Handle position (see dwg.) : Terminals connected: 5.08 (.196) CIRCUIT 5.08 (.200) MODEL NO. 9 6 Single pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts Epoxy II 12.70 (.500) 5.08 (.200) 7.30 (.287) 7.00 (.275) III 1.10 (.043) ON ON MOM MOM MOM 2.67 DIA (.105 DIA) OFF OFF OFF - 3.81 (.150) CIRCUIT ON ON MOM ON ON 7.20 11.00 (.283) (.433) I Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 1-2 13.20 (.519) I 2-3 3 II 24 2 0.80 (.301) III 3.00 (.118) 5236WWCDB16X445 5239WWCDB16X445 5237WWCDB16X445 5238WWCDB16X445 5232WWCDB16X445 Handle position (see dwg.): Terminals connected: 6.25 DIA (.246 DIA) MODEL NO. 1.60 DIA (.062 DIA) 6.85 (.269) 12.70 (.500) 3.81 (.150) 1 1.00 (.039) 5.08 (.200) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 31 10/6/00, 6:41 AM A31 5000 SERIES - MINIATURE TOGGLE SWITCHES A Double pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts 4.75 (.187) Epoxy 4.75 (.187) 3.81 (.150) 12.00 (.472) 7.30 (.287) 1.60 DIA (.062 DIA) 5.08 (.200) 7.20 11.00 (.283) (.433) I II 24 0.80 (.301) III * Function 4: SP in DP case. see diagram at end of section. 12.70 (.500) 6.85 (.269) 12.70 (.500) 1.10 (.043) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 2.67 DIA (.105 DIA) OFF OFF OFF ON ON ON II 6.25 DIA (.246 DIA) ON ON MOM ON ON ON ON MOM III 2-3 5-6 13.20 (.519) 5246WWCDB16X445 5249WWCDB16X445 5247WWCDB16X445 5248WWCDB16X445 5242WWCDB16X445 5244WWTHCDB16X445* 5244WWTH1RCDB16X445* 5244WWTH2RCDB16X445* Handle position: Terminals connected: 3 6 2 5 4 1 1.00 (.039) 3.81 (.150) 5.08 (.200) Three pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts 7.20 12.45 (.283) (.490) 16.50 (.649) 14.35 (.564) 1.60 DIA (.062 DIA) 5.08 (.200) I 3 9 II 24 2 8 III 1 6.90 (.271) 3.00 (.118) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 4.75 (.187) 1.10 (.043) ON ON MOM MOM MOM I 1-2 4-5 7-8 0.80 (.031) OFF OFF OFF II 2.67 DIA (.105 DIA) ON ON MOM ON ON III 2-3 5-6 8-9 6.25 DIA (.246 DIA) CIRCUIT 5256WWCDB16X514 5259WWCDB16X514 5257WWCDB16X514 5258WWCDB16X514 5252WWCDB16X514 Handle position: Terminals connected: 13.20 (.519) MODEL NO. 4.75 (.187) 3.81 (.150) Epoxy 7.25 (.285) 3.81 (.150) 14.35 (.564) 7 1.00 (.039) 5.08 (.200) Four pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 4.75 (.187) 1.10 (.043) 3.81 (.150) 5.08 (.200) 0.80 (.031) 7.20 12.45 (.283) (.490) I 9 12 II 24 8 11 III 7 6.90 (.271) 7.25 (.285) 14.35 (.564) 14.35 (.564) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 21.20 (.834) 13.20 (.519) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON MOM ON ON ON ON ON MOM MOM ON MOM III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5.08 (.200) * Function 4: SP in DP case. see diagram at end of section. 3.00 (.118) 5266WWCDB16X514 5269WWCDB16X514 5267WWCDB16X514 5268WWCDB16X514 5262WWCDB16X514 5264WWTHCDB16X514* 5264WWTH1RCDB16X514* 5264WWTH2RCDB16X514* Handle position: Terminals connected: 6.25 DIA (.246 DIA) CIRCUIT 4.75 (.187) Epoxy MODEL NO. 10 1.00 (.039) 3.81 (.150) Single pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts CIRCUIT II I 2-3 A23-A40 I 6.25 DIA (.246 DIA) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 3.18 (.125) EPOXY 1-2 3.18 (.125) 1 2 3 15.75 (.620) 0.40 (.015) 1.27 (.050) 15.75 (.620) III II 24 4.70 (.185) ON ON MOM MOM MOM 7.20 7.30 (.283) (.287) OFF OFF OFF - Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. A32 III ON ON MOM ON ON 13.00 (.511) 5236YCDB16X445 5239YCDB16X445 5237YCDB16X445 5238YCDB16X445 5232YCDB16X445 Handle position (see dwg.): Terminals connected: 4.10 (.161) MODEL NO. 7.00 (.275) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 32 10/6/00, 6:41 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT 3.00 (.118) MODEL NO. 5000 SERIES - MINIATURE TOGGLE SWITCHES A Double pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts 6.25 DIA (.246 DIA) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 3.18 (.125) EPOXY 1 3.18 (.125) 3 2 15.75 (.620) 0.40 (.015) 1.27 (.050) 15.75 (.620) 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 I 7.20 6.90 (.283)(.271) OFF OFF OFF ON ON ON II II 13.00 (.511) ON ON MOM ON ON ON ON MOM III 2-3 5-6 III 24 4.70 (.185) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 5246YCDB16X445 5249YCDB16X445 5247YCDB16X445 5248YCDB16X445 5242YCDB16X445 5244YTHCDB16X445* 5244YTH1RCDB16X445* 5244YTH2RCDB16X445* Handle position: Terminals connected: 8.20 (.322) CIRCUIT 4.75 (.187) 12.00 (.472) * Function 4: SP in DP case. see diagram at end of section. Single pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts Keyway I 8.00 (.314) 1.00 (.039) Epoxy 12.00 (.472) 3.70 (.145) II 24 3 2 III 1 4.70 (.185) Above models have black paddle. 7.00 (.275) 14.15 (.557) 0.50 (.019) ON ON MOM MOM MOM I 1-2 0.80 (.031) OFF OFF OFF II 5.30 (.208) CIRCUIT ON ON MOM ON ON III 2-3 2.25 (.088) 5636AB4N+U242N 5639AB4N+U242N 5637AB4N+U242N 5638AB4N+U242N 5632AB4N+U242N Handle position: Terminals connected: 6.60 (.259) MODEL NO. 1.80 (.070) 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 12.60 (.496) 1.80 (.070) 1.00 (.039) Epoxy 12.00 (.472) 3.70 (.145) 0.50 (.019) I 8.00 (.314) 3 6 II 24 2 5 III 1 4 12.60 (.496) 4.70 (.185) *Function 4: SP in DP case. see diagram at end of section Above models have black paddle. 12.00 (.472) 14.15 (.557) 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 5.30 (.208) OFF OFF OFF ON ON ON II 2.25 (.088) ON ON MOM ON ON ON ON MOM III 2-3 5-6 6.60 (.259) 5646AB4N+U242N 5649AB4N+U242N 5647AB4N+U242N 5648AB4N+U242N 5642AB4N+U242N 5644THAB4N+U242N* 5644TH1RAB4N+U242N* 5644TH2RAB4N+U242N* Handle position: Terminals connected: 6.35 DIA-40UNS (1/4-40UNS) Keyway CIRCUIT 13.20 (.519) MODEL NO. 4.75 (.187) Double pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 33 10/6/00, 6:41 AM A33 5000 SERIES - MINIATURE TOGGLE SWITCHES A 5000 Series switches for peak currents 2-120 amps at 60 VDC - 10,000 cycles minimum. 3-40 amps at 125/250 VAC - 10,000 cycles minimum. Silver nickel alloy (AgNi) contacts. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Other specifications same as 5000 Series. Also see 'Switches for Peak Currents' technical page in rear of catalog. EPOXY CIRCUIT ON ON 7.00 (.275) 12.00 (.472) 3.70 (.145) 0.50 (.019) 1.00 (.039) II 3 24 13.20 (.519) I 2 III 1 0.80 (.031) 10.50 8.00 (.413) (.314) 4.70 (.185) MODEL NO. 5636ABX814 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals Keyway CIRCUIT ON ON III 10.50 8.00 (.413) (.314) Keyway A23-A40 3.70 (.145) 24 13.20 (.519) I II 12.00 (.472) 0.50 (.019) 1.00 (.039) 3 6 2 5 1 4 4.70 (.185) 12.00 (.472) A34 4.75 (.187) EPOXY 0.80 (.031) MODEL NO. 5646ABX814 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 34 10/6/00, 6:41 AM 5000 SERIES - MINIATURE TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals Number & bushings of poles Electrical functions Terminals (For function 4 models only) connections /functions Contact materials 5 3 4 5 6 Single pole Double pole Three pole Four pole 2 Straight p.c.,right angle, quick connect or wire-wrap terminals with 1/440 (6.35mm) threaded bushing. 6 Solder lug terminals with 1/4-40 (6.35mm) or 15/3232 (11.9mm) threaded bushings. 6 ON ON 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 2 ON MOM 4* ON ON ON 4* ON 0N MOM 4* MOM ON MOM * specify selection from 'connections/ functions' box also (For double & four pole only). (NONE) M Solder lugs with 15/32-32 (11.9mm) bushing M I W R Wire-wrap (epoxy term. seal standard) W Horizontal right angle p.c. (NONE) T H T H 1 T H 2 ON ON R ON ON R MOM ON ON MOM MOM A Silver A D Silver, gold plated C D Brass, gold plated W W Vertical right angle p.c. Y Straight p.c. w/mounting brk't. Z Quick connect (epoxy term. seal standard) Options: Black finish Sealing (NONE) G Matte black finish on bushing, actuator & hardware. (NONE) Unless standard (see Terminals above) B Epoxy sealed terminals K Front panel sealing with o-ring & gasket. K B Both of above Examples of completely specified model numbers: 5636AB, 5244WWTH2RAB16UL Actuators Agency Recognition (NONE) 1 3 Standard 2 7 8 Flat 9 Flat 1 2 Flat 1 6 1 7 2 1 Insulated 2 2 2 3 2 4 Large (long) 2 5 2 7 Large (short) 4 N For paddles only 1 V Locking (1 position) 2 V Locking (2 positions) 3 V Locking (3 positions) (see actuator drawings). Special options (NONE) U L C S A V D E L N Z Telecommunications listing G A M Military listing (consult factory for details of approved models). (NONE) See listing on pg. C39 Caps and paddles (NONE) Caps U 2 7 0 U 1 7 1 0 U 6 4 0 Paddles U 2 4 0 N U 2 9 0 N U 3 9 0 N (see drawings and color codes). Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 35 10/6/00, 6:41 AM A35 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS SEALING (NONE) Indicates no terminal sealing. Indicates front panel sealing with o-ring (1) and gasket (2) to protect the switch from water and dust. Withstands 1 bar pressure. Available on models with 1/4" (6.35mm) or 15/32" (11.9mm) threaded bushings. Not available with actuators 8,9, 12, 22 or 23. Includes both B and K above. 2 2 Includes gasket washer U60 Includes gasket washer U360 ACTUATORS for 1/4" (6.35mm) threaded bushings 3.00 DIA (.118) 9.00 (.354) 1.00 (.039) 9.00 (.354) 10.50 (.413) 16.00 (.629) 3.00 DIA (.118 DIA) 13 Standard 4N For use with paddles only 2 5.00 DIA (.196 DIA) 8 Not available with option K 4.20 DIA (.165 DIA) 6.30 (.248) 11.40 (.448) 21.30 (.838) 5.00 DIA (.196 DIA) 9 Not available with option K 12 Not available with option K 3.30 DIA (.129) DIA) 21.30 (.838) 16.40 (.645) 2.80 DIA (.110 DIA) 5.50 (.216) 7.00 (.275) 2.70 DIA (.354 DIA) 3.30 DIA (.129 DIA) A23-A40 16.30 (.642) 14.00 (.551) 21.30 (.838) A36 23 Not available with option K 2 black 4 grey 6 red 9 orange 3.30 DIA (.129 DIA) 3.30 DIA (.129 DIA) 22 Not available with option K insulative extension with this actuator and replace '0' with color selection below. 1 blue 3 green 5 yellow 7/1 white 17 16 21 Specify U640 25 Not available with option K APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 36 10/6/00, 6:42 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE K B 1 1 4 Maxi (.157 MAX) K Indicates epoxy terminal sealing. Note: for models with 'Z' and 'MIWR' epoxy terminal sealing is standard and need not be specified with 'B'. 3 Maxi (.118 MAX) B K with 15/32" (11.9mm) flatted bushing K with 1/4" (6.35mm) keyway bushing 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) ACTUATORS for 15/32" (11.9mm) threaded bushings 5.00 DIA (.196 DIA) 11.70 (.460) 17.50 (.688) 11.90 (.468) 11.90 (.468) 27 24 LOCKING ACTUATORS for 1/4" (6.35mm) threaded bushings Other locking actuator styles available - consult factory. 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 15.10 (.594) 14.75 (.580) 14.85 (.584) 5.20 DIA (.204 DIA) 9.00 (.354) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 DIA (.196 DIA) 1V 1 locked position (function 6) 2V 2 locked positions (function 6) 3V 3 locked positions (functions 9 & 4) ACTUATORS for smooth bushing models (W, WW & Y) 3.00 DIA (.118 DIA) 6.00 (.236) 12.00 (.472) 1.00 (.039) 13.50 (.531) 19.00 (.748) 3.00 DIA (.118 DIA) 13 Standard 4N For use with paddles only 2 2.60 DIA (.102 DIA) 2.80 DIA (.110 DIA) 6.70 (.263) 8.50 (.334) 10.00 (.393) 2.70 DIA (.106 DIA) 17 16 7 3.30 DIA (.129 DIA) 24.30 (.956) 16.40 (.645) Colors 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange Note that for switches with mounting brackets, the actuator length may be reduced by .015" (0.4mm). Refer to individual switch drawings. ' 21 Specify U640 insulative extension with this actuator and replace '0' with color selection. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 37 10/6/00, 6:42 AM A37 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) 10.80 (.425) 4N For use with paddles only 9 Not available w/function 2 (ON - MOM) 12 Not available w/function 2 (ON - MOM) 7.30 (.287) 8.80 (.346) 23.10 (.909) 8 Not available w/function 2 (ON - MOM) 8.10 (.318) 13.20 (.519) 23.10 (.909) 2 17 16 21 Specify U640 insulative extension with this actuator and replace '0' with color selection below. 15.80 (.622) 23.10 (.909) Colors 1 2 3 4 5 6 7/1 9 22 Not available with sealing option K or X408 23 blue black green grey yellow red white orange 3.5 DIA (.137 DIA) U270 For actuator 13 and threaded bushing only A38 A23-A40 7.30 (.287) 11.00 (.433) 13.50 (.531) INSULATING CAPS (replace '0' in part numbers below with color code) 3.5 DIA (.137 DIA) 3.5 DIA (.137 DIA) U1040 For actuator 13 and smooth bushing only U1710 For actuator 17 and threaded bushing or actuator 7 and smooth bushing only APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 38 10/6/00, 6:42 AM SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 13 Standard 16.40 (.645) 7.20 (.283) 1.00 (.039) 12.30 (.484) 17.80 (.700) ACTUATORS for switches with X404 and X445 options (see 'special options' pages following) 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) Mat'l: UL94HB Polyamide (replace '0' in part numbers below with color code from preceeding pg.) 2.00 (.078) U240N 14.00 (.551) 18.00 (.708) 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 9.00 (.354) 21.40 (.842) 21.55 (.848) 20.00 (.787) 6.00 (.236) 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 11.00 (.433) 6.00 (.236) 14.15 (.557) 5.30 (.208) 12.60 (.496) 2.00 (.078) 6.60 (.259) 2.25 (.088) U390N U290N SPECIAL OPTIONS 6.25 DIA (.246 DIA) Threaded bushing 1/4" (6.35mm) to replace plain bushing on models with W, WW & Y. X404 Switches with W option with short actuator and offset terminal bends (see Page A25). X435 .732" (18.6mm) long p.c. terminals - epoxy terminal seal standard. X438 Smooth bushing .246" (6.25mm). Height.283" (7.2mm) without shoulder. X442 Threaded bushing 1/4" (6.35mm). Height .389" ( 9.9mm). X445 Smooth bushing .283" (7.2mm) for W, WW & Y models. Available with same actuators, insulating cap and paddles as X404. X500 Threaded bushing 1/4" (6.35mm). Height .354" (9mm) without shoulder. X507 .293" (10mm) long p.c. terminals. X512 1.062" (27mm) long p.c. terminals - epoxy terminal seal standard. X514 Spacing .564" (14.35mm) instead of .500" (12.7mm) for 3 and 4 pole WW models. X515 Smooth bushing .246" (6.25mm) without shoulder. X601 Silver plated brass contacts. Ratings - 0.2 amps 250 VAC, 0.4 amps 125 VAC or 0.5 amps 30 VDC. Electrical life : 20,000 cycles min. Minimum quantity: 5000 pcs. X681 Satin chrome actuator for flat actuators. X729 1/299" (33mm) long p.c. terminals. X764 Special customer specified marking. X769 Red anodized locking lever top. X806 Smooth bushing .246" (6.25mm) instead of standard threaded bushing and silver plated brass contacts. 9.00 (.354) 1.00 (.039) 6.25 DIA (.246 DIA) X438 6.35 DIA-40UNS (1/4-40UNS) 6.25 DIA (.246 DIA) 9.90 (.389) 0.30 (.011) X386 X445 X442 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 14.35 (.564) X500 Printed circuit terminal lengths Option X435 X507 X512 X729 Length L .732 (18.6mm) .293 (10mm) 1.062 (27mm) 1.299 (33mm) 6.25 DIA (.246 DIA) X514 6.25 (.246 DIA) 1.00 (.039) Locking lever on model with smooth bushing. 6.35 DIA-40UNS (1/4-40UNS) 14.75 (.580) X916 X372 9.00 (.354) Switches for peak current. See pg. A28. X371 6.00 (.236) X814 1.00 (.039) X386 1.00 (.039) Threaded bushing 1/4" (6.35mm). Height .274" (7mm). 7.00 (.275) X372 7.20 (.283) Smooth bushing .246" (6.25mm) instead of standard threaded bushing. 7.20 (.283) X371 6.35 DIA-40UNS (1/4-40UNS) 1.00 (.039) Tin plated terminals (for p.c. terminals only). 6.00 (.236) F L SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 11.00 (.433) 21.55 (.848) PADDLES for actuator 4N only. X515 X916 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23-A40 39 10/6/00, 6:42 AM A39 5000 SERIES - MINIATURE TOGGLE SWITCHES A PANEL CUT-OUTS & MISCELLANEOUS PANEL CUT-OUTS for 1/4" (6.35mm) bushings 2.20 DIA (.086 DIA) 6.50 DIA (.255 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1.10 (.043) 6.50 DIA (.255 DIA) 2.70 (.106) 5.20 (.204) Standard (with locking ring supplied) With K sealing option PANEL CUT-OUTS for 15/32" (11.9mm) bushings 12.50 DIA (.492 DIA) 3.50 DIA (.137 DIA) 1.70 (.066) 12.50 DIA (.492 DIA) 9.60 (.377) 5.10 (.200) Standard (with locking ring supplied) With K sealing option WIRING for function 4 switch 6 6 6 5 III 4 5 II 5 I 4 4 S.4 I E 3 6 9 12 3 6 9 12 3 6 9 12 2 5 8 11 2 5 8 11 2 5 8 11 1 4 10 7 1 4 7 10 1 7 4 10 5 S.1 II S.3 III S.10I TH E 11 S.7 II S.9 III Above diagrams are viewed from bottom of switch. Equivalent to single pole 3 throw switch. Dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer. A40 A23-A40 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 40 10/6/00, 6:43 AM