PD - 95150 Advanced Process Technology l Surface Mount (IRL3103S) l Low-profile through-hole (IRL3103L) l 175C Operating Temperature l Fast Switching l Fully Avalanche Rated l Lead-Free Description IRL3103SPbF IRL3103LPbF l HEXFET(R) Power MOSFET D VDSS = 30V RDS(on) = 12m G Advanced HEXFET(R) Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. ID = 64A S The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRL3103L) is available for lowprofile applications. D2Pak IRL3103S TO-262 IRL3103L Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS IAR EAR dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 srew Max. Units 64 45 220 94 0.63 16 34 22 5.0 -55 to + 175 A W W/C V A mJ V/ns C 300 (1.6mm from case ) 10 lbf*in (1.1N*m) Thermal Resistance Parameter RJC RJA www.irf.com Junction-to-Case Junction-to-Ambient (PCB mount)** Typ. Max. Units --- --- 1.6 40 C/W 1 04/19/04 IRL3103S/LPbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Qg Qgs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. 30 --- --- --- 1.0 22 --- --- --- --- --- --- --- --- --- --- --- Typ. --- 0.028 --- --- --- --- --- --- --- --- --- --- --- 8.9 120 14 9.1 RDS(on) Static Drain-to-Source On-Resistance VGS(th) gfs Gate Threshold Voltage Forward Transconductance IDSS Drain-to-Source Leakage Current LD Internal Drain Inductance --- 4.5 LS Internal Source Inductance --- 7.5 Ciss Coss Crss EAS Input Capacitance Output Capacitance Reverse Transfer Capacitance Single Pulse Avalanche Energy --- 1650 --- 650 --- 110 --- 1320 V(BR)DSS IGSS Max. Units Conditions --- V VGS = 0V, ID = 250A --- V/C Reference to 25C, ID = 1mA 12 VGS = 10V, ID = 34A m 16 VGS = 4.5V, ID = 28A --- V VDS = VGS, ID = 250A --- S VDS = 25V, ID = 34A 25 VDS = 30V, VGS = 0V A 250 VDS = 24V, VGS = 0V, TJ = 150C 100 VGS = 16V nA -100 VGS = -16V 33 ID = 34A 5.9 nC VDS = 24V 17 VGS = 4.5V, See Fig. 6 and 13 --- VDD = 15V --- ID = 34A --- RG = 1.8 --- VGS = 4.5V, See Fig. 10 Between lead, --- 6mm (0.25in.) nH G from package --- and center of die contact --- VGS = 0V --- VDS = 25V --- pF = 1.0MHz, See Fig. 5 130 mJ IAS = 34A, L = 0.22mH D S Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol 64 --- --- showing the A G integral reverse --- --- 220 S p-n junction diode. --- --- 1.2 V TJ = 25C, IS = 34A, VGS = 0V --- 57 86 ns TJ = 25C, IF = 34A --- 110 170 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: Repetitive rating; pulse width limited by max. junction temperature. (See fig. 11) Starting TJ = 25C, L = 220H RG = 25, IAS = 34A, VGS=10V (See Figure 12) ISD 34A, di/dt 120A/s, VDD V(BR)DSS, TJ 175C 2 Pulse width 400s; duty cycle 2%. This is a typical value at device destruction and represents operation outside rated limits. This is a calculated value limited to TJ = 175C . **When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com IRL3103S/LPbF 1000 1000 VGS 15V 10V 4.5V 3.7V 3.5V 3.3V 3.0V BOTTOM 2.7V VGS 15V 10V 4.5V 3.7V 3.5V 3.3V 3.0V BOTTOM 2.7V 100 TOP I D , Drain-to-Source Current (A) I D , Drain-to-Source Current (A) TOP 100 10 2.7V 20s PULSE WIDTH T = 25 C J 1 0.1 1 10 2.7V 10 100 Fig 1. Typical Output Characteristics TJ = 25 C TJ = 175 C 10 V DS = 15V 20s PULSE WIDTH 4.0 5.0 6.0 7.0 VGS , Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics www.irf.com 8.0 RDS(on) , Drain-to-Source On Resistance (Normalized) I D , Drain-to-Source Current (A) 2.5 3.0 1 10 100 Fig 2. Typical Output Characteristics 1000 1 2.0 J VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) 100 20s PULSE WIDTH T = 175 C 1 0.1 ID = 56A 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 180 TJ , Junction Temperature ( C) Fig 4. Normalized On-Resistance Vs. Temperature 3 IRL3103S/LPbF VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd C, Capacitance (pF) 2500 Ciss 2000 1500 Coss 1000 500 0 C rss 1 10 15 VGS , Gate-to-Source Voltage (V) 3000 12 VDS = 24V VDS = 15V 9 6 3 0 100 ID = 34A FOR TEST CIRCUIT SEE FIGURE 13 0 10 VDS , Drain-to-Source Voltage (V) 1000 ID , Drain-to-Source Current (A) ISD , Reverse Drain Current (A) 1000 TJ = 175 C 10 TJ = 25 C 1 0.1 0.0 V GS = 0 V 0.4 0.8 1.2 1.6 2.0 VSD ,Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 4 30 40 Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage 100 20 Q G , Total Gate Charge (nC) 2.4 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 100sec 10 1msec Tc = 25C Tj = 175C Single Pulse 1 1 10msec 10 100 VDS , Drain-toSource Voltage (V) Fig 8. Maximum Safe Operating Area www.irf.com IRL3103S/LPbF 70 VDS I D , Drain Current (A) 60 VGS D.U.T. RG 50 40 RD + -VDD VGS Pulse Width 1 s Duty Factor 0.1 % 30 20 Fig 10a. Switching Time Test Circuit VDS 10 90% 0 25 50 75 100 125 TC , Case Temperature 150 175 ( C) 10% VGS Fig 9. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 P DM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.01 0.00001 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRL3103S/LPbF L VD S D .U .T RG IA S 2V0GS V tp D R IV E R + - VD D A 0 .0 1 Fig 12a. Unclamped Inductive Test Circuit V (B R )D SS tp EAS , Single Pulse Avalanche Energy (mJ) 240 1 5V ID 14A 24A 34A TOP 200 BOTTOM 160 120 80 40 0 25 50 75 100 125 150 175 Starting TJ , Junction Temperature ( C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current IAS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50K QG 12V .2F .3F VGS QGS D.U.T. QGD + V - DS VGS VG 3mA Charge Fig 13a. Basic Gate Charge Waveform 6 IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit www.irf.com IRL3103S/LPbF Peak Diode Recovery dv/dt Test Circuit + D.U.T* Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + - - + RG * dv/dt controlled by RG * ISD controlled by Duty Factor "D" * D.U.T. - Device Under Test VGS * + - VDD Reverse Polarity of D.U.T for P-Channel Driver Gate Drive P.W. Period D= P.W. Period [VGS=10V ] *** D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode [VDD] Forward Drop Inductor Curent Ripple 5% [ ISD ] *** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 14. For N-channel HEXFET(R) power MOSFETs www.irf.com 7 IRL3103S/LPbF D2Pak Package Outline D2Pak Part Marking Information (Lead-Free) T H IS IS AN IR F 5 30S WIT H L OT COD E 80 24 AS S E MB L E D ON WW 02 , 2 000 IN T H E AS S E MB L Y L IN E "L " IN T E R N AT ION AL R E CT IF IE R L OGO N ote: "P " in as s embly line pos ition indicates "L ead-F ree" P AR T N U MB E R F 5 30 S AS S E MB L Y L OT COD E D AT E COD E YE AR 0 = 2 000 WE E K 02 L IN E L OR IN T E R N AT ION AL R E CT IF IE R L OGO AS S E MB L Y L OT COD E 8 P AR T N U MB E R F 530S D AT E COD E P = D E S IGN AT E S L E AD -F R E E P R OD U CT (OP T ION AL ) Y E AR 0 = 2000 WE E K 02 A = AS S E MB L Y S IT E COD E www.irf.com IRL3103S/LPbF TO-262 Package Outline TO-262 Part Marking Information E XAMP L E : T H IS IS AN IR L 3103L L OT CODE 1789 AS S E MB L E D ON WW 19, 1997 IN T H E AS S E MB L Y L INE "C" Note: "P " in as s embly line pos ition indicates "L ead-F ree" INT E R NAT IONAL R E CT IF IE R L OGO AS S E MB L Y L OT CODE P AR T NU MB E R DAT E CODE YE AR 7 = 1997 WE E K 19 L INE C OR INT E R NAT IONAL R E CT IF IE R L OGO AS S E MB L Y L OT CODE www.irf.com P AR T NU MB E R DAT E CODE P = DE S IGNAT E S L E AD-F R E E P R ODU CT (OP T IONAL ) YE AR 7 = 1997 WE E K 19 A = AS S E MB L Y S IT E CODE 9 IRL3103S/LPbF D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TR R 1 .6 0 (.0 63 ) 1 .5 0 (.0 59 ) 4.10 (.1 6 1 ) 3.90 (.1 5 3 ) F E E D D IR E C TIO N 1 .8 5 (.0 7 3 ) 1 .6 5 (.0 6 5 ) 1 .6 0 (.0 6 3 ) 1 .5 0 (.0 5 9 ) 1 1 . 6 0 ( .4 5 7 ) 1 1 . 4 0 ( .4 4 9 ) 0 .3 6 8 (.0 1 4 5 ) 0 .3 4 2 (.0 1 3 5 ) 1 5 .4 2 (. 6 0 9 ) 1 5 .2 2 (. 6 0 1 ) 2 4 .3 0 (.9 5 7 ) 2 3 .9 0 (.9 4 1 ) TRL 1 0 . 9 0 ( .4 2 9 ) 1 0 . 7 0 ( .4 2 1 ) 1 .7 5 (. 0 6 9 ) 1 .2 5 (. 0 4 9 ) 4 .7 2 (.1 3 6 ) 4 .5 2 (.1 7 8 ) 1 6 .1 0 ( .6 3 4 ) 1 5 .9 0 ( .6 2 6 ) F E E D D IR E C T IO N 1 3. 50 (.5 3 2 ) 1 2. 80 (.5 0 4 ) 2 7 .4 0 (1.0 7 9 ) 2 3 .9 0 (.9 4 1 ) 4 330.00 (14.173) M AX. 6 0.0 0 (2 . 36 2 ) M IN . NO TE S : 1 . C O M F O R M S T O E IA -4 1 8. 2 . C O N T R O L L IN G D IM E N S IO N : M IL L IM E T E R . 3 . D IM E N S IO N M E A S U R E D @ H U B . 4 . IN C L U D E S F L A N G E D IS T O R T IO N @ O U T E R E D G E . 26 .40 (1.03 9) 24 .40 (.961 ) 3 3 0 .4 0 (1 .1 9 7 ) MAX. 4 Data and specifications subject to change without notice. This product has been designed and qualified for the industrial market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.04/04 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/