POWER LPX 80 Enclosure Installation Notes LPX80 * Cover Enclosure Kit LPX80 will fit all the LPX8X and NLP65 Series power supplies Materials 1Base 1 Cover 4M3 x 6mm pan head screws with spring washer 4 M3 x 6mm countersunk sdrews 1 M4 nut 1 M4 star washer 1 M4 spring washer 1 Plastic insulator sheet OUTPUT TERMINALS INPUT TERMINALS INSULATOR (4X) STANDOFF GROUND STUD 0.25 [6.4] O0.35 [O8.8] O0.14 [O3.6] LPX80 Data Sheet Mechanical Drawing (2X) M3 INSERTS INPUT WIRING ACCESS 1.181 [ 30.0 ] 0.984 [ 25.0 ] 1.134 [ 28.8 ] 2.236 [ 56.8 ] 3.858 [98.0 ] OUTPUT WIRING ACCESS 5.906 [150.0 ] 1.748 [44.4 ] (2X) 0.591 [15.0 ] (2X) 4.331 [110.0 ] (2X) M3 INSERTS (2X) 0.364 [ 9.3 ] (2X) 0.787 [ 20.0 ] (2X) 0.787 [20.0 ] (2X) 4.803 [122.0 ] (2X) 0.738 [ 18.8 ] (2X) 3.543 [90.0 ] (2X) O4mm MTG HOLES (4X) M3 STANDOFF FOR MTG POWER SUPPLY A A (2X) 2.55 [65 ] (2X) 2.756 [70.0 ] (2X) 3.150 [80.0 ] A A (2X) 0.657 [ 16.7 ] (2X) 0.354 [ 9.0 ] M3 INSERTS (4X) MARKED "A" (2X) 0.551 [ 14.0 ] SEE KEYWAY DETAILS NOTES 1. All dimensions are in inches (mm) 2. Overall dimensions: 5.9 (150) x 3.9 (98.0) x 1.75 (44.4) 3. Base plate has three sets of customer mountings: a. Bottom mounting (4x) M3 inserts. Max. screw penetration 0.0787 (2mm) b. Bottom mounting (2x) 4mm clear holes plus 2 keyways (see keyway detail) c. Side mountings (4x) M3 inserts. Max. screw penetration 0.236 (6mm) 4. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and clearances. 5. Ensure base is firmly connected to supply earth via the earth stud marked . 6. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. (c) 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com LPX80 Rev. 10.24.14