POWER
LPX 80 Enclosure
Installation Notes LPX80 • Cover Enclosure Kit
LPX80 will t all the LPX8X and NLP65 Series power supplies
MATERIALS
1 Base
1 Cover
4 M3 x 6mm pan head screws with
spring washer
4 M3 x 6mm countersunk sdrews
1 M4 nut
1 M4 star washer
1 M4 spring washer
1 Plastic insulator sheet
Ø0.35 [Ø8.8] Ø0.14 [Ø3.6]
0.25 [6.4]
GROUND STUD
INPUT TERMINALS
OUTPUT TERMINALS
INSULATOR
(4X) STANDOFF
LPX80 Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other
names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners.
© 2014 Artesyn Embedded Technologies, Inc.
www.artesyn.com
A
A
A
A
INPUT
WIRING
ACCESS
OUTPUT
WIRING ACCESS
(2X) M3 INSERTS
M3 INSERTS
(4X) MARKED "A"
(2X) Ø4mm MTG HOLES
SEE KEYWAY DETAILS
(4X) M3 STANDOFF
FOR MTG POWER SUPPLY
(2X) M3 INSERTS
1.181 30.0[]
1.13428.8[]
0.984 25.0[]
2.236 56.8[]
3.858 98.0[]
5.906 150.0[]
(2X) 4.331110.0[]
(2X) 0.364 9.3[]
(2X) 0.787 20.0[]
(2X) 3.543 90.0[]
(2X) 4.803122.0[]
(2X) 0.78720.0[]
(2X) 0.591 15.0[]
1.748 44.4[]
(2X) 0.73818.8[]
(2X) 2.75670.0[]
(2X) 2.55 65[]
(2X) 0.551 14.0
[]
(2X) 0.65716.7[]
(2X) 0.3549.0[]
(2X) 3.150 80.0[]
Mechanical Drawing
LPX80 Rev. 10.24.14
NOTES
1. All dimensions are in inches (mm)
2. Overall dimensions: 5.9 (150) x 3.9 (98.0) x 1.75 (44.4)
3. Base plate has three sets of customer mountings:
a. Bottom mounting (4x) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Bottom mounting (2x) 4mm clear holes plus 2 keyways (see keyway detail)
c. Side mountings (4x) M3 inserts. Max. screw penetration 0.236 (6mm)
4. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and clearances.
5. Ensure base is firmly connected to supply earth via the earth stud marked .
6. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are complied with, in respect to creepage and clearance
distances, and distances through insulation.
