LINEAR & POWER AMPLIFIERS - SMT
6
6 - 324
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC619LP5 / 619LP5E
v07.0908
General Description
Features
Functional Diagram
Typical Applications
GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
The HMC619LP5(E) is a GaAs MMIC PHEMT
Distributed Power Ampli er die which operates bet-
ween DC and 10 GHz. The ampli er provides 11 dB
of gain, +37 dBm output IP3 and +27 dBm of output
power at 1 dB gain compression while requiring 300
mA from a +12V supply. Gain atness is excellent at
±0.5 dB from DC - 10 GHz making the HMC619LP5(E)
ideal for EW, ECM, Radar and test equipment
applications. The HMC619LP5(E) ampli er I/Os are
internally matched to 50 ohms.
P1dB Output Power: +27 dBm
Gain: 11 dB
Output IP3: +37 dBm
Supply Voltage: +12V @ 300 mA
50 Ohm Matched Input/Output
32 Lead 5x5mm Lead SMT Package: 25mm2
The HMC619LP5(E) wideband PA is ideal for:
• Telecom Infrastructure
• Microwave Radio & VSAT
• Military & Space
• Test Instrumentation
• Fiber Optics
Electrical Speci cations, TA = +25° C, Vdd= +12V, Vgg2= +5V, Idd= 300 mA*
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Frequency Range DC - 2.0 2.0 - 8.0 8.0 - 10.0 GHz
Gain 10 12 9 11 8 10.5 dB
Gain Flatness ±0.5 ±0.25 ±0.5 dB
Gain Variation Over Temperature 0.016 0.02 0.03 dB/ °C
Input Return Loss 11 12.5 17 dB
Output Return Loss 16 16 12 dB
Output Power for 1 dB Compression (P1dB) 28 25 27 23 25 dBm
Saturated Output Power (Psat) 29 28 25.5 dBm
Output Third Order Intercept (IP3) 41 37 32 dBm
Noise Figure 5 5 7 dB
Supply Current
(Idd) (Vdd= +12V, Vgg1= -0.8V Typ.) 300 300 300 mA
* Adjust Vgg1 between -2 to 0V to achieve Idd= 300 mA typical.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 325
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Output Return Loss vs. Temperature
Gain & Return Loss Gain vs. Temperature
Reverse Isolation vs. Temperature
Input Return Loss vs. Temperature
Noise Figure vs. Temperature
-30
-20
-10
0
10
20
024681012
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
0
3
6
9
12
15
18
024681012
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
024681012
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-60
-50
-40
-30
-20
-10
0
024681012
+25C
+85C
-40C
ISOLATION (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
024681012
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
0
3
6
9
12
15
024681012
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 326
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
P1dB vs. Temperature Psat vs. Temperature
Output IP3 vs. Temperature Output IP3 vs. Output Power @ 5GHz
Gain, Power & Output IP3 vs.
Supply Voltage @ 10 GHz, Fixed Vgg
20
22
24
26
28
30
32
0246810
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
20
22
24
26
28
30
32
0246810
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
20
25
30
35
40
45
024681012
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
10
15
20
25
30
35
40
11.5 12 12.5
Gain
P1dB
Psat
IP3
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Vdd Supply Voltage (V)
30
35
40
45
50
0 2 4 6 8 10 12 14 16 18 20 22 24 26
11.5V
12.0V
12.5V
IP3 (dBm)
OUTPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 327
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Power Compression @ 1 GHz
Power Compression @ 10 GHz
Power Compression @ 5 GHz
Power Dissipation
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) 13 Vdc
Gate Bias Voltage (Vgg1) -2.5 to 0 Vdc
Gate Bias Voltage (Vgg2) +4V to +6V
RF Input Power (RFIN)(Vdd = +12 Vdc) 27 dBm
Channel Temperature 150 °C
Continuous Pdiss (T= 85 °C)
(derate 65 mW/°C above 85 °C) 4.2 W
Thermal Resistance
(channel to package bottom) 15.3 °C/ W
Storage Temperature -65 to 150 °C
Operating Temperature -40 to 85 °C
Vdd (V) Idd (mA)
11.5 299
12.0 300
12.5 301
Typical Supply Current vs. Vdd
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
0
4
8
12
16
20
24
28
32
0 4 8 12 16 20
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
0
4
8
12
16
20
24
28
32
0 4 8 12 16 20
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
0
4
8
12
16
20
24
28
32
0 4 8 12 16 20
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
2
3
4
5
6
7
8
9
10
-10 -5 0 5 10 15 20
Max Pdis @ 85C
2 GHz
6 GHz
POWER DISSIPATION (W)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 328
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC619LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H619
XXXX
HMC619LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H619
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Outline Drawing
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 329
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Number Function Description Interface Schematic
1, 3, 4, 6-12,
14, 17, 18, 19,
20, 22-28,
31, 32
N/C No connection. These pins may be connected to RF
ground. Performance will not be affected.
2 Vgg2 Gate Control 2 for ampli er. +5V should be applied to
Vgg2 for nominal operation.
5 RFIN This pad is DC coupled
and matched to 50 Ohms.
13 Vgg1 Gate Control 1 for ampli er.
15 ACG4
Low frequency termination. Attach bypass capacitor
per application circuit herein.
16 ACG3
21 RFOUT & Vdd RF output for ampli er. Connect the DC
bias (Vdd) network to provide drain current (Idd).
See application circuit herein.
29 ACG2
Low frequency termination. Attach bypass capacitor
per application circuit herein.
30 ACG1
Ground
Paddle GND Ground paddle must be connected to RF/DC ground.
Pin Descriptions
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 330
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Application Circuit
NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee or external bias network.
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
LINEAR & POWER AMPLIFIERS - SMT
6
6 - 331
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
The circuit board used in the nal application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
List of Materials for Evaluation PCB 108347 [1]
HMC619LP5 / 619LP5E
v07.0908 GaAs PHEMT MMIC
POWER AMPLIFIER, DC - 10 GHz
Item Description
J1 - J2 SRI K Connector
J3 - J4 2mm Molex Header
C1, C2 100 pF Capacitor, 0402 Pkg.
C3 - C6 1000 pF Capacitor, 0603 Pkg.
C7 - C9 4.7 μF Capacitor, Tantalum
U1 HMC619LP5 / HMC619LP5E
PCB [2] 109765 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
