Amphenol Circular Interconnects MIL-C-38999 Series I LJT Series Bayonet Coupled Crimp Circular Connectors Features Specifications * Lightweight Space-saving design * Durability - 500 cycles * EMI Shielded * 100% Scoop-proof Operating Temperature Current Rating Contact Size 20 Contact Size 16 Voltage Rating (sea level) Service Rating I Service Rating II Customer Options Shell sizes Contact arrangements Circuit sizes -9 - 100+ - 1 to 128 Tooling - -55C up to 200C - 7.5A - 13A Crimp Tool Positioner Insert/Remove* Insert/Remove* - M22520/1-01 - M22520/1-04 - M81969/14-03** - M81969/14-10*** * Plastic Tool ** For Size 16 Contacts. *** For Size 20 Contacts - 600VAC(rms) - 900VAC(rms) Related Information Detailed catalogue - 12-090-14 Solder, PCB, Wire Wrap, Coax, Fiber & Filter optional Part Number System: (refer to Part Number Make-up for assistance - opposite) LJT XX XX-XX-X X X (X) CONNECTOR TYPE LJT: Standard Mil-C-38999 I Part Number Make-up LJT00... DEVIATIONS Finish High Temperature, Chemical & Fuel Resistant versions available upon request Suffix Cadmium Plated Ni Base Olive Drab Cadmium Plated, Ni Base Electroless Ni Anodic Coating (Alumilite) Chromate treated (Iridite 14-2) SHELL STYLE 00: Wall Mount Receptacle 01: Line Receptacle 02: Box Mount Receptacle 06: Straight Plug 07: Jam-Nut Receptacle 08: 90 Plug (AAO) I: Solder Mount Rec. (Hermetic only) W/SR Suffix (SR) (014) (386) (023) (005) (424) (300) (011) (344) ALTERNATE KEYING Blank: Normal Position See detailed catalogue for variations CONTACT STYLE P: Pins S: Sockets SERVICE CLASS RP: Potting Boot + Grommet RE: Environmental Sealed Can add SR RT: Environmental w/o rear Accessory Y: Hermetically Sealed A: Fixed Solder Contacts (LTD only) (page D-12 and D-13) (page D-12 and D-13) Anodic Coating Cadmium Plated Nickel Base Olive Drab, Cadmium, Nickel Base Electroless Nickel FINISH See adjacent table Line Receptacle Part Number Make-up LJT02RE-... LTJ02A-... Cannot add SR Part Number Make-up LJT07... Jam Nut Receptacle SHELL SIZE See Insert Arrangement Table LJT Accessories - Cable Clamp for Crimp type Housing (if ordered separately to connector) Part Number System: Finish (-XX9 standard) Diagram Chromate Treat -XX0 10-405982-XXX SHELL SIZE 9/11/13/15/17/19/21/23/25 Part Number Make-up LJT01RE-... LTJ01A-... Box Mount Receptacle INSERT ARRANGEMENTS See Insert Arrangement Table For Cadmium-free Zinc Cobalt plating consult representative SR = Strain Relief Wall Mount Receptacle -XX5 -XX7 -XX9 -XXG Part Number Make-up LJT06... Straight Plug MS Part Numbering System: LJT Accessories - Heat Shrinkable Backshells (shielded) Type Olive Drab Cadmium Shielded Backshell Configuration (-X) -1 -2 -3 Right Angle Finish 45 ABK A-WAR-X ABK A-WBR-X ABK A-WCR-X ABK A-WDR-X ABK A-WER-X ABK A-WFR-X ABK A-WGR-X ABK A-WHR-X ABK A-WJR-X Shell Size 9 11 13 15 17 19 21 23 25 Straight Part Number: Diagram Alternatives: Unshielded Replace R with U, Electroless Nickel replace W with F. LJT Accessories - Caps Part Numbers: Shell Size Cap & Chain for Plugs Cadmium Plate, Ni Base 9 11 13 15 17 19 21 23 25 10-421399-099 10-421399-119 10-421399-139 10-421399-159 10-421399-179 10-421399-199 10-421399-219 10-421399-239 10-421399-259 Chain length 76.2mm 88.9mm 101.6mm Cap & Chain for Receptacle Cadmium Plate, Ni Base Chain length 10-427406-099 10-427406-119 10-427406-139 10-427406-159 10-427406-179 10-427406-199 10-427406-219 10-427406-239 10-427406-259 Diagram 76.2mm 88.9mm Contact Variations: 101.6mm See page D-13 for a list of PINS, SOCKETS, COAX and POWER contacts available. Alternate Cap finishes (Replace last digit): 0=Chromate, 5=Anodic, G=Electroless Ni Connectors individually packaged with crimp contacts (bulk contacts available) and insert/extract tool. ASF/LTD/AAO D-10