CPC1001N Optocoupler: Unidirectional Input, Single-Transistor Output INTEGRATED CIRCUITS DIVISION Parameter Breakdown Voltage BVCEO Current Transfer Ratio (Min) Saturation Voltage Input Control Current Rating 30 100 0.3 0.2 Units V % V mA CPC1001N is a unidirectional input optocoupler with a single transistor output. Current transfer ratios range from 100% to 800%. Approvals Features * * * * * Description 100mA Continuous Load Rating 1500Vrms Input/Output Isolation Small 4-Pin SOP Package Machine Insertable, Wave Solderable Surface Mount and Tape & Reel Version Available * UL Recognized Component: File # E76270 * CSA Certified Component: Certificate # 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Applications * * * * * * * * Part # CPC1001N CPC1001NTR Loop Detect Ringing Detect Sensor Circuitry Instrumentation Multiplexers Data Acquisition I/O Subsystems Industrial Control Pin Configuration + Control - Control Pb DS-CPC1001N-R05 Description 4-Pin SOP (100/Tube) 4-Pin SOP Surface Mount (2000/Reel) 1 2 4 3 Load Load e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1001N Absolute Maximum Ratings @ 25C Parameter Input Power Dissipation 1 Input Control Current Peak (10ms) Reverse Input Voltage Phototransistor 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 2.00 mW / C Ratings 150 5 1 5 150 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units mW mA A V mW Vrms C C Electrical Characteristics @ 25C Parameters Output Characteristics Phototransistor Blocking Voltage Phototransistor Output (Dark) Current Saturation Voltage Current Transfer Ratio Output Capacitance Input Characteristics Input Control Current Input Voltage Drop Input Reverse Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units ICEO=10A IF=0mA, VCEO=5V IF=1mA, IC=1mA IF=0.2mA, VCE=0.5V VCEO=25V, f=1MHz BVCEO ICEO VCE(sat) CTR COUT 30 100 - 90 9 330 6 500 0.3 800 - VP nA V % pF IC=0.2mA, VCE=0.5V IF=5mA VR=5V IF VF IR 0.9 - 0.1 1.2 - 0.2 1.4 10 mA V A - CI/O - 3 - pF Switching Characteristics @ 25C Characteristic Turn-On Time Turn-Off Time Symbol ton toff Test Condition Typ 1 30 IF=2mA, VCC=5V, RL=1K Switching Time Test Circuit Units s VCC RL Pulse Width=5ms Duty Cycle=1% IF VCE IF VCE 90% 10% t ON 2 www.ixysic.com t OFF R05 INTEGRATED CIRCUITS DIVISION CPC1001N PERFORMANCE DATA* LED Voltage vs. LED Current (TA=25C) 10 0 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) IF=10mA IF=5mA IF=2mA IF=1mA IF=0.5mA 1 IF=0.2mA IF=0.1mA 1.2 1.3 1.4 1.5 LED Forward Voltage (V) -20 0 20 40 60 Temperature (C) 80 0.20 25 IF=5mA 15 10 IF=2mA IF=1mA IF=0.5mA IF=0.2mA 5 0.0 Blocking Voltage (VP) 0.14 0.12 0.10 0.2 0.4 0.6 0.8 Collector Voltage (V) 1.0 80 Turn-On Time vs. Load Resistance (TA=25C, VCC=5V) 94 93 92 91 90 -40 1000 -20 0 20 40 60 Temperature (C) 80 100 Turn-Off Time (Ps) Turn-On Time (Ps) IF=1mA 1.5 IF=2mA 1.0 IF=5mA 0.5 20 40 60 Temperature (C) 80 100 Typical CTR vs. LED Forward Current (VCE=0.5V) 250 200 55C 25C 85C -40C 150 100 0.1 1 LED Forward Current (mA) 10 400 VCC=10V VCC=5V 300 VCC=3V 200 100 0 -40 -20 0 20 40 60 Temperature (C) 80 100 Turn-Off Time vs. Load Resistance (TA=25C, VCC=5V) 2.5 2.0 0 Collector Leakage Current vs. Temperature 95 100 -20 500 88 20 40 60 Temperature (C) IF=2mA IF=1mA IF=0.2mA 1.1 1.2 89 0 1.2 Blocking Voltage vs. Temperature 0.16 -20 1.3 300 20 96 0.18 0.08 -40 1.4 350 IF=10mA 100 Typical Saturation Voltage vs. Temperature (IF=2mA, IC=1mA) IF=50mA IF=20mA IF=10mA IF=5mA 1.5 1.0 -40 1.6 Typical Voltage vs. Current (TA=25C) 0 -40 Saturation Voltage (V) 1.1 30 0.1 3.0 1 0.1 1.6 Typical ICE Current vs. Temperature (VCE=0.5V) 10 LED Forward Voltage (V) 20 10 CTR (%) 30 LED Forward Voltage vs. Temperature 1.6 Leakage Current (nA) Typical ICE (mA) LED Forward Current (mA) 40 100 LED Voltage vs. LED Current (TA=25C) 100 Collector Current (mA) LED Forward Current (mA) 50 100 Refer to the Test Circuit on the previous page for these two graphs. IF=5mA IF=2mA IF=1mA 10 0.0 0.1 1 10 Load Resistance (k:) 100 0.1 1 10 Load Resistance (k:) 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1001N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1001N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1001N 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 4 e3 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION CPC1001N MECHANICAL DIMENSIONS CPC1001N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: 0.0637 0.0383 (0.0025 0.0015) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1001NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1001N-R05 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/13/2012