MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
T4ARS3505M
THRU
T4ARS3507M
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T
C
= 55
o
C (With Heat-sink)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
V
RRM
V
DC
I
FSM
T
J
, T
STG
V
RMS
UNITS
Volts
Volts
Amps
35
300 Amps
Peak Power Dissipation at TA=25OC,TP=1mS (Note 1) PPPM Maximum 400 Watts
Maximum Peak Pulse Current IPPM 0.73 Amps
Breakdown Voltage Range at IT=1mA VBR 380 ~ 420 Volts
Maximum Clamping Voltage at IPPM =0.73A VC548 Volts
0
C
Operating and Storage Temperature Range
I
O
-55 to + 150
Volts
T4ARS3505M
800
T4ARS3506M
800
560
1000
T4ARS3507M
T4ARS3505M T4ARS3506M T4ARS3507M
1000
700
600
600
420
2010-05
REV:O
CHARACTERISTICS
at Rated DC Blocking Voltage
V
F
SYMBOL
I
R
uAmps
Maximum DC Reverse Current
Maximum Instantaneous Forward Voltage at 17.5A DC Volts
5.0
@T
A
= 100
o
C
@T
A
= 25
o
C
1.1
200
UNITS
NOTES : 1.Non-repetitive current pulse, per Fig.8 and derated above TA=25
O
C per Fig.7.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
Dimensions in inches and (millimeters)
FEATURES
* Low leakage
* Low forward voltage
* Surge overload rating : 300 amperes peak
* Mounting position: Any
* Ideal for printed circuit boards
* High forward surge current capability
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* UL list the recognized component directory,file #E94233
RS-35M
.106 (2.7)
.096 (2.3)
.087 (2.2)
.071 (1.8)
.043 (1.1)
.035 (0.9)
.303 (7.7)
.287 (7.3)
.303 (7.7)
.287 (7.3)
.402 (10.2)
.386 (9.8)
.031 (0.8)
.023 (0.6)
.114 (2.9)
.098 (2.5)
.189 (4.8)
.173 (4.4)
.150 (3.8)
.134 (3.4)
1.193 (30.3)
1.169 (29.7)
f .138 (3.5)
.126 (3.2)
.441 (11.2)
.425 (10.8)
.165 (4.2) .197 (5)
.150 (3.8)
.708 (18.0)
.669 (17.0) .800 (20.3)
.697 (17.7)
3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
Current Squarad Time I
2T
373.3 A2/Sec
TRANSIENT VOLTAGE SUPPRESSORS
GPP BRIDGE RECTIFIER
VOLTAGE RANGE 600 to 1000 Volts CURRENT 35 Amperes
RATING AND CHARACTERISTICS CURVES ( T4ARS3505M THRU T4ARS3507M )
AVERAGE RECTIFIED FORWARD CURRENT, (A)
NUMBER OF CYCLE
POWER DISSIPATION, (W)
INSTANTANEOUS FORWARD VOLTAGE, (V)
0
0
60
20
10
30
40
50
INSTANTANEOUS FORWARD CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
0
10
5
2
1
0.5
0.2
30
20
4 8 12 2016 24
1.61.2 1.40.60.4 0.8 10.2
2 10 20 5010
100
0
200
300
5 100
FIG.3 SURGE FORWARD CURRENT CAPABILITY
FIG.1 TYPICAL INSTANTANEOUS FORWARD
CHARACTERITICS FIG.2 POWER DISSIPATION
AMBIENT TEMPERATURE, (OC)
PEAK FORWARD SURGE CURRENT, (A)
0
2
3
1
0
4
8040 120 160
FIG.4 TYPICAL FORWARD CURRENT
DERATING CURVE
HEAT SINK TEMPERATURE, (OC)
AVERAGE FORWARD CURRENT, (A)
10
0
30
40
50
10
20
30 50 70 90 110 130 150 170
FIG.5 TYPICAL FORWARD CURRENT
DERATING CURVE
MOUNTING TORQUE (kg.cm)
THERMAL RESISTANCE (OC/W)
2
0
0.2
0.4
0.6
0.8
1.0
1.2
3 4 5 6 7 8
FIG.6 CONTACT THERMAL RESISTANCE fcf
Pulse test
per one diode
T
C
= 150
O
C (TYP)
T
C
= 25
O
C (TYP)
non-repetitive
Tj=25
1 cycle
8.3ms 8.3ms
0
I
FSM
sine wave
on glass-epoxi substrate
P.C.B
soldering land 5mmf
sine wave
R-load
free in air
heatsink
Tc Tc
sine wave
R-load
on heatsink
with thermal compound
sine wave
TJ = 150
O
C
AMBIENT TEMPERATURE, (OC)
PEAK PULSE POWER OR CURRETN
DERATING IN PERCENTAGE, (%)
PULSE WIDTH,(S)
0
25
50
0
75
100
PEAK PULSE POWER, (KW)
0.1
1.0
10
100
1007525 50 150 175125 200
0.1u 1.0u 10u 100u 1m 10u
RATING AND CHARACTERISTICS CURVES ( T4ARS3505M THRU T4ARS3507M )
FIG.7 PEAK PULSE POWER RATING CURVE FIG.8 PULSE DERATING CURVE
Non-Repetitive
Pulse Waveform
Shown in Fig.9
TA=25
O
C
TIME, (mS)
0 1.0
0
50
100
150
3.02.0 4.0
FIG.9 PULSE WAVEFORM
PEAK PULSE CURRENT, (%)
tr = 10usec.
Peak Value
IPPM
td
10/1000usec. Waveform
as Defined by R.E.A.
HALF VALUE - I
PPM
2
Pulse Width (td) is Defined
as the Point Where the Peak
Current Decays to 50% of I
PPM
V(BR), BREAKDOWN VOLTAGE, (V)
CJ, CAPACITANCE, (pF)
1.0
100
1000
100000
10000
10 100 200
FIG.10 TYPICAL JUNCTION CAPACITANCE
TJ= 25
O
C
f = 1MHz
Vsig = 50mVp-p
Measured at
Zero Bias
Stand off
Voltage,VWM
Measured at
Schematic
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE