SM2400-EVK1 Evaluation Kit for SM2400 Multi-Standard Narrowband Power Line Communication Modem Communication technology by: Semitech Semiconductor Product Overview The SM2400-EVK1 is a complete evaluation kit for the SM2400 multi-standard Narrowband Power Line Communication (N- PLC) modem. The SM2400-EVK1 is configurable to any of the major OFDM based N-PLC standards, such as PRIME, G3-PLC and IEEE 1901.2, as well as to a number of robust proprietary modes. The SM2400-EVK1 includes a modem module (SM2400-EV1Mx-x), a base board for the module featuring various interfaces to facilitate engineering evaluation and a PC-based GUI application (SM2400Control.exe), which enables comprehensive configuration, control and monitoring/testing of the communication performance of the modem subsystem. Figure 1: SM2400-EVK1 Evaluation Kit Figure 2: SM2400-EV1Mx-x Modem Modules The SM2400-EV1Mx-x N-PLC module is a complete communications modem card. It contains the SM2400 modem chip as well flash memory, line driver, coupling circuitry and all the analog filtering necessary for an optimal design. It is intended to be used as a reference design for the implementation of an N-PLC modem product. The base board of the EVK features a mini-USB connector for connecting to a PC or other controller, a JTAG interface for debugging and various options for the power supply. The SM2400-EVK1 is offered in several variations as outlined in this document. Features Standardized PLC UART interface with handshaking for flow control Built-in power-line coupling circuit Multitude module, dimensions: 83mm L x 45mm W of downloadable firmware builds All major OFDM standards: PRIME, G3-PLC, IEEE 1901.2 Special robust modes: XR, XXR Optional mesh networking (SMESH) PB2400-EVK1A-PWRLN-8/2016 Various modules optimized for different operational bands CENELEC A CENELEC B/BC FCC/ARIB Benefits Facilitates evaluation of various communication schemes. This is accomplished by downloading firmware and using various versions of the modem modules. GUI software application (SM2400Control.exe) to control the SM2400 modem and monitor communication performance Enables quick modem subsystem implementation by making schematics and bill of materials available for reference. Applications Advanced Metering Infrastructure (AMI) Automated Meter Reading (AMR) Smart grid communication Street lighting control Solar and alternative energy management Smart home energy monitoring Building automation (BA) SCADA (Supervisory Control And Data Acquisition) Industrial IoT (I-IoT) Kit Content & Configurations The SM-2400-EVK1 evaluation kits include: Base board SM2400-EV1Mx-x module USB Cables User Guide (available for download) Firmware Evaluation Kit SM2400-EVK1M1-A SM2400-EVK1M1-B SM2400-EVK1M1-C Line Driver TI-OPA564 TI-OPA564 TI-OPA564 Band CENELEC A CENELEC B/BC FCC Modem Modules SM2400-EV1M1-A SM2400-EV1M1-B SM2400-EV1M1-C Line Driver TI-OPA564 TI-OPA564 TI-OPA564 Band CENELEC A CENELEC B/BC FCC + GUI (available for download) Interfaces There are four headers on the back of the SM2400-EV1Mx-x modules. The designator Pin 1 and the location of each header can be found in Figure 3. The pin out and description of each header is described below. Figure 3: SM2400-EV1Mx-x Top View 2 Table 1: Header H2 Pin# Name Functionality 1,2 ACTIVE Mains active 3,4,5,6 NC 7,8 NEUTRAL Mains neutral Table 2: Header H6 (DSP) Pin# Name Dir Functionality 1 JTDO O JTAG Interface 2 JTMS I JTAG Interface 3 JTDI I JTAG Interface 4 JTCK I JTAG Interface 5 JTRSTB I JTAG Interface 6 GND P Ground 7 COREIO14 IO COREIO 8 COREIO10 IO COREIO 9 COREIO12 IO COREIO 10 COREIO13 IO COREIO 11 NC 12 GND P Ground Table 3: Header H7 Pin# Name Dir Functionality 1 1VB P External 1.8V Power (Optional) 2 PSU_SHDNb I Active low 3.3V SMPS disable (input) 3, 4 3V3 P External 3.3V Supply, PSU_)SHDNb must be pulled if being used 5, 6 AFE_VCC P 15V @ 125mA 7, 8, 9 GND P Ground 10 UART_TDO O SM2400 UART TXD 11 pulled_RDI I SM2400 UART RXD 12 UART_HSI I SM2400 UART Handshake Input 13 UART_HSO O SM2400 UART Handshake Outpu 14 Mode2 I Boot mode pin 2 15 Mode1 I Boot mode pin 1 16 Mode0 I Boot mode pin 0 17 RESETb I Reset 18 RESETb IO COREIO 19 GND P Ground 20 SPIS_OUT O Host SPI Slave Interface 21 SPIS_SCK I Host SPI Slave Interface 22 SPIS_IN I Host SPI Slave Interface 23 GND P Ground I Host SPI Slave Interface 24 3 Table 4: Header H8 (DNP) Pin# Name Dir Functionality 1 NC 2 SPIM_OUT O SPI Master Interface 3 SPIM_SCK O SPI Master Interface 4 SPIM_IN I SPI Master Interface 5 SPIM_SS0b O SPI Master Interface (Mapped to on board SPI boot memory) 6 SPIM_SS1b O SPI Master Interface 7 SPIM_SS2b O SPI Master Interface 8 GND P Ground 9 COREIO02 IO PHYLED (Output) 10 COREIO01 IO RXRANGE1 (output) 11 COREIO00 IO RXRANGE0 (output) 12 COREIO11 IO Overcurrent Flag (Output) 13 COREIO09 IO COREIO 14 COREIO08 IO TX Enable (Output) 15 GND P Ground 16 LDO PD I Active high LDO power down NC for SM2400 based module Firmware & Reference Material Available firmware for various versions of the SM2400-EVK1 evaluation kit includes the following packages: PRIME PHY and MAC G3/IEEE PHY and MAC IEEE 1901.2 FCC PHY and MAC IEEE PHY and SMESH Proprietary XXR PHY and SMESH Additional firmware packages become available from time to time. These and other reference material such as schematics and bill of material is downloadable from the Adesto technologies website. Contact Information For more information regarding the SM2400 including application notes, product samples, demonstration modules, pricing and ordering please contact: Adesto Technologies http://www.adestotech.com Communication technology by: Semitech Semiconductor 4 Corporate Office California | USA Adesto Headquarters 3600 Peterson Way Santa Clara, CA 95054 Phone: (+1) 408.400.0578 Email: contact@adestotech.com (c) 2017 Adesto Technologies. All rights reserved. / Rev.: PB2400-EVK1A-PWRLN-8/2016 Adesto(R) and the Adesto logo,are registered trademarks or trademarks of Adesto Technologies. All other marks are the property of their respective owners. Disclaimer: Adesto Technologies Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty which is detailed in Adesto's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Adesto are granted by the Company in connection with the sale of Adesto products, expressly or by implication. Adesto's products are not authorized for use as critical components in life support devices or systems.