RS1AFA, NRVHPRS1AFA Series Surface Mount Fast Recovery Rectifiers 0.8 A, 50 V - 1000 V www.onsemi.com Features * * * * * * * * * Glass Passivated Chip Junction Fast Switching for High Efficiency High Surge Capacity Low Forward Voltage: 1.3 V Maximum UL Flammability 94V-0 Classification MSL 1 per J-STD-020 RoHS Compliant / Green Molding Compound Industrial Device Qualified per AEC-Q101 Standards NRVHP Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable 1 Cathode 2 Anode 2 1 SOD-123FA CASE 425AB *See authorized use policy (Color Band Denotes Cathode) ORDERING INFORMATION Part Number Top Mark Package Packing Method RS1AFA RAL SOD-123FA Tape and Reel RS1BFA RBL SOD-123FA Tape and Reel RS1DFA RDL SOD-123FA Tape and Reel RS1GFA RGL SOD-123FA Tape and Reel RS1JFA RJL SOD-123FA Tape and Reel RS1KFA RKL SOD-123FA Tape and Reel RS1MFA RML SOD-123FA Tape and Reel NRVHPRS1AFA RAL SOD-123FA Tape and Reel NRVHPRS1BFA RBL SOD-123FA Tape and Reel NRVHPRS1DFA RDL SOD-123FA Tape and Reel NRVHPRS1GFA RGL SOD-123FA Tape and Reel NRVHPRS1JFA RJL SOD-123FA Tape and Reel NRVHPRS1KFA RKL SOD-123FA Tape and Reel NRVHPRS1MFA RML SOD-123FA Tape and Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2015 April, 2018 - Rev. 2 1 Publication Order Number: RS1AFA/D RS1AFA, NRVHPRS1AFA Series Table 1. ABSOLUTE MAXIMUM RATINGS Values are at TA = 25C unless otherwise noted. Value Symbol Parameter RS1 AFA RS1 BFA RS1 DFA RS1 GFA RS1 JFA RS1 KFA RS1 MFA Unit VRRM Repetitive Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRMS RMS Reverse Voltage 35 70 140 280 420 560 700 V DC Blocking Voltage 50 100 200 400 600 800 1000 V VR IF(AV) Average Forward Rectified Current 0.8 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine-Wave Superimposed on Rated Load 30 A Operating Junction Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C TJ TSTG Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 2. THERMAL CHARACTERISTICS (Note 1) Symbol Parameter Value Unit YJL Typical Thermal Characteristics, Junction-to-Lead 32 C/W RqJA Typical Thermal Resistance, Junction-to-Ambient 105 C/W 1. Device mounted on 5 mm x 5 mm Cu pad PCB. Table 3. ELECTRICAL CHARACTERISTICS Values are at TA = 25C unless otherwise noted. Symbol Parameter Conditions Min Typ Max Unit VF Instantaneous Forward Voltage (Note 2) IF = 0.8 A 1.3 V IR Reverse Current at Rated VR TJ = 25C 5 mA TJ = 125C 50 CJ Junction Capacitance Trr Reverse Recovery Time VR = 4 V, f = 1 MHz IF = 0.5 A, IR = 1 A, Irr = 0.25 A 10 pF RS1AFA, RS1BFA, RS1DFA 150 RS1GFA, RS1JFA 250 RS1KFA, RS1MFA 500 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse test with PW = 300 ms, 1% duty cycle www.onsemi.com 2 RS1AFA, NRVHPRS1AFA Series INSTANTANEOUS REVERSE CURRENT (mA) TYPICAL PERFORMANCE CHARACTERISTICS 1.0 AVERAGE FORWARD A CURRENT (A) 0.9 RESISTIVE OR INDUCTIVE LOAD 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 175 100 TJ =125oC 10 1 TJ =100oC 0.1 0.01 0.001 TJ =25oC 0 LEAD TEMPERATURE (oC) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Figure 1. Forward Current Derating Curve Figure 2. Typical Reverse Characteristics INSTANTANEOUS FORWARDCURRENT (A) PEAK FORWARD SURGE CURRENT (A) 10 50 8.3ms Single Half Sine Wave 40 30 20 10 0 1 10 100 Pulse Width=300ms 1% Duty Cycle TJ =125oC 1 TJ =25oC 0.1 0.4 NUMBER OF CYCLES AT 60 Hz 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Figure 3. Maximum Non-Repetitive Forward Surge Current Figure 4. Typical Instantaneous Forward Characteristics 100 CAPACITANCE (pF) f=1.0MHz Vsig=50mVp-p 10 1 1 10 100 REVERSE VOLTAGE (V) Figure 5. Typical Junction Capacitance Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD-123FL CASE 425AB ISSUE O DATE 31 AUG 2016 2.90 2.70 1.90 1.70 4.30 1.40 1.90 1.20 TOP VIEW 1.40 1.20 LAND PATTERN RECOMMENDATION 1.43 1.23 3.80 3.40 0.30 0.16 FRONT VIEW 0.85 0.35 2.60 2.45 NOTES: A. NO INDUSTRY STANDARD APPLIES TO THIS PACKAGE. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. 1.20 0.80 BOTTOM VIEW DOCUMENT NUMBER: DESCRIPTION: 98AON13722G SOD-123FL Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative