© Semiconductor Components Industries, LLC, 2015
April, 2018 − Rev. 2
1Publication Order Number:
RS1AFA/D
RS1AFA, NRVHPRS1AFA
Series
Surface Mount Fast
Recovery Rectifiers
0.8 A, 50 V − 1000 V
Features
•Glass Passivated Chip Junction
•Fast Switching for High Efficiency
•High Surge Capacity
•Low Forward Voltage: 1.3 V Maximum
•UL Flammability 94V−0 Classification
•MSL 1 per J−STD−020
•RoHS Compliant / Green Molding Compound
•Industrial Device Qualified per AEC−Q101 Standards
•NRVHP Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
*See authorized use policy
ORDERING INFORMATION
Part Number Top Mark Package Packing Method†
RS1AFA RAL SOD−123FA Tape and Reel
RS1BFA RBL SOD−123FA Tape and Reel
RS1DFA RDL SOD−123FA Tape and Reel
RS1GFA RGL SOD−123FA Tape and Reel
RS1JFA RJL SOD−123FA Tape and Reel
RS1KFA RKL SOD−123FA Tape and Reel
RS1MFA RML SOD−123FA Tape and Reel
NRVHPRS1AFA RAL SOD−123FA Tape and Reel
NRVHPRS1BFA RBL SOD−123FA Tape and Reel
NRVHPRS1DFA RDL SOD−123FA Tape and Reel
NRVHPRS1GFA RGL SOD−123FA Tape and Reel
NRVHPRS1JFA RJL SOD−123FA Tape and Reel
NRVHPRS1KFA RKL SOD−123FA Tape and Reel
NRVHPRS1MFA RML SOD−123FA Tape and Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
SOD−123FA
CASE 425AB
1
Cathode
2
Anode
1
2
(Color Band Denotes Cathode)
RS1AFA, NRVHPRS1AFA Series
www.onsemi.com
2
Table 1. ABSOLUTE MAXIMUM RATINGS Values are at TA = 25°C unless otherwise noted.
Symbol Parameter
Value
Unit
RS1
AFA
RS1
BFA
RS1
DFA
RS1
GFA
RS1
JFA
RS1
KFA
RS1
MFA
VRRM Repetitive Peak Reverse Voltage 50 100 200 400 600 800 1000 V
VRMS RMS Reverse Voltage 35 70 140 280 420 560 700 V
VRDC Blocking Voltage 50 100 200 400 600 800 1000 V
IF(AV) Average Forward Rectified Current 0.8 A
IFSM Peak Forward Surge Current: 8.3 ms Single
Half Sine−Wave Superimposed on Rated Load
30 A
TJOperating Junction Temperature Range −55 to +150 °C
TSTG Storage Temperature Range −55 to +150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 2. THERMAL CHARACTERISTICS (Note 1)
Symbol Parameter Value Unit
YJL Typical Thermal Characteristics, Junction−to−Lead 32 °C/W
RqJA Typical Thermal Resistance, Junction−to−Ambient 105 °C/W
1. Device mounted on 5 mm x 5 mm Cu pad PCB.
Table 3. ELECTRICAL CHARACTERISTICS Values are at TA = 25°C unless otherwise noted.
Symbol Parameter Conditions Min Typ Max Unit
VFInstantaneous Forward Volt-
age (Note 2)
IF = 0.8 A 1.3 V
IRReverse Current at Rated VRTJ = 25°C 5 mA
TJ = 125°C 50
CJJunction Capacitance VR = 4 V, f = 1 MHz 10 pF
Trr Reverse Recovery Time IF = 0.5 A,
IR = 1 A,
Irr = 0.25 A
RS1AFA, RS1BFA, RS1DFA 150 ns
RS1GFA, RS1JFA 250
RS1KFA, RS1MFA 500
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle
RS1AFA, NRVHPRS1AFA Series
www.onsemi.com
3
TYPICAL PERFORMANCE CHARACTERISTICS
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0
AVERAGE FORWARD A
CURRENT (A)
LEAD TEMPERATURE (oC)
RESISTIVE OR
INDUCTIVE LOAD
0.001
0.01
0.1
1
10
100
0
INSTANTANEOUS REVERSE CURRENT
(mA)
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
T
J=25oC
TJ=100oC
T
J=125oC
0
10
20
30
40
50
1
PEAK FORWARD SURGE CURRENT
(A)
NUMBER OF CYCLES AT 60 Hz
8.3ms Single Half Sine Wave
0.1
1
10
0.4
INSTANTANEOUS FORWARDCURRENT
(A)
FORWARD VOLTAGE (V)
Pulse Width=300ms
1% Duty Cycle
TJ=25oC
TJ=125oC
1
10
100
1
CAPACITANCE (pF)
REVERSE VOLTAGE (V)
f=1.0MHz
Vsig=50mVp−p
Figure 1. Forward Current Derating Curve Figure 2. Typical Reverse Characteristics
Figure 3. Maximum Non−Repetitive Forward
Surge Current
Figure 4. Typical Instantaneous Forward
Characteristics
Figure 5. Typical Junction Capacitance Figure 6. Reverse Recovery Time
Characteristic and Test Circuit Diagram
0.6 0.8 1.0 1.2 1.4 1.6 1.8
10 100
10 100
25 50 75 100 125 150 175
SOD−123FL
CASE 425AB
ISSUE O
DATE 31 AUG 2016
1.40
1.20
1.90 1.40
1.20
4.30
1.43
1.23
0.30
0.16
3.80
3.40
1.90
1.70
2.90
2.70
1.20
0.80
0.85
0.35 2.60
2.45 NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
TOP VIEW
LAND PATTERN RECOMMENDATION
BOTTOM VIEW
FRONT VIEW
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13722G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SOD−123FL
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
