Agilent U1450A/U1460A Series Insulation Resistance Testers
Product Fact Sheet
Features:
• Remote testing coupled with report
generation capability
• 50 V/100 V/250 V/500 V/1000 V test
voltages (1)
• Adjustable test voltages from 10 V up to
1.1 kV (2) **
• Up to 260 GΩ insulation resistance range
• Full-featured 4.5 digit OLED DMM
(66,000 counts) (3) *
• Timed/PI/DAR test (4)
• IP 67 certified – waterproof and dust
proof (5)
• Tested to withstand a 3 meter (10-ft)
drop
• (–40 °C to +55 °C) operating temperature
range **
• CAT III 1000 V/CAT IV 600 V safety
ratings (6)
* U1461A only
** U1453A and U1461A only
Generate test reports remotely via the U1117A IR-to-
Bluetooth® adapter or U1173B IR-USB cable on a
Windows PC or iOS/Android based smart devices.
Testing insulation resistance cables when
commissioning electrical installations
Troubleshooting electrical motor accurately using
the insulation resistance tester
3
6
1
4
2
5
Do MORE, test MORE with a single tool
Accomplish more in a day’s work with a single insulation tester – test more applications, make various types of measurements and
easily generate reports. Certified to IP 67 and tested to withstand a 3 meter (10-feet) drop, this robust tester is capable to withstand
harsh conditions.
Recommended service options
Additional two years of Return-to-Agilent warranty
Additional two years of Return-to-Agilent calibrations
For more information go to www.agilent.com/find/insulationtesters
Recommended accessories
Technical data, availability and pricing subject to change without notice.
© Agilent Technologies, Inc. 2014, Printed in USA, April 2, 2014
Product Fact Sheet
U1117A
IR-to-Bluetooth adapter
U5403A
Remote switch probe
Three-Year Warranty
www.agilent.com/find/ThreeYearWarranty
Agilent Assurance Plans
www.agilent.com/find/AssurancePlans
Agilent's new insulation resistance tester family
U1451A
U1453AU1452A
U1452AT
U1461A
5991-4223EN
Product specifications
U1451A U1452A U1452AT U1453A U1461A
Display type LCD LCD LCD OLED OLED
Insulation resistance tester features
Insulation test voltage range 250 V, 500 V, 1000 V 50 V, 100 V, 250 V,
500 V, 1000 V 50 V, 100 V 50 V, 100 V, 250 V,
500 V, 1000 V 50 V, 100 V, 250 V,
500 V, 1000 V
Insulation resistance range 66 GΩ 260 GΩ 66 GΩ 260 GΩ 260 GΩ
Earth bond resistance
measurement 0.01 Ω to 60 KΩ 0.01 Ω to 60 KΩ 0.01 Ω to 60 KΩ 0.001 Ω to 60 KΩ 0.001 Ω to 60 KΩ
Timed, PI, DAR Timed only √ √ √ √
Adjustable insulation test
voltages – – – 10 V to 1.1 kV 10 V to 1.1 kV
Live circuit test inhibit
(30 V, 50 V, 75 V) √ √ √ √ √
Calculate cable length by
capacitance √ √ √ √ √
Automatic discharge for
capacitive circuits under test √ √ √ √ √
Data management
Remote testing and report
generation 1√ √ √ √ √
Multimeter features
DMM display resolution 6,600 counts 6,600 counts 6,600 counts 66,000 2/6,600 counts 66,000 2/6,600 counts
AC specification Calibrated for Sine Wave Calibrated for Sine Wave Calibrated for Sine Wave TrueRMS TrueRMS
Measurements AC/DC voltage,
Auto AC/DC voltage
identification 3,
Resistance, Continuity,
Capacitance
AC/DC voltage,
Auto AC/DC voltage
identification 3,
Resistance, Continuity,
Capacitance
AC/DC voltage,
Auto AC/DC voltage
identification 3,
Resistance, Continuity,
Capacitance
AC/DC voltage,
Auto AC/DC voltage
identification 3,
Resistance, Continuity,
Capacitance, Diode test
AC/DC voltage (V, mV),
AC/DC current (uA, mA), Auto
AC/DC voltage and current
identification 3, Resistance,
Continuity, Capacitance,
Diode test, Temperature
DMM special features
Low pass filter (LPF) – – – – √
Non-contact voltage
detection (Vsense) – – – – √
General specifications
IP rating, drop test IP 67, 10 ft (3 meters) IP 67, 10 ft (3 meters) IP 67, 10 ft (3 meters) IP 67, 10 ft (3 meters) IP 67, 10 ft (3 meters)
Safety protection CAT III 1000 V/
CAT IV 600 V CAT III 1000 V/
CAT IV 600 V CAT III 1000 V/
CAT IV 600 V CAT III 1000 V/
CAT IV 600 V CAT III 1000 V/
CAT IV 600 V
Operating temperature –20 °C to +55 °C –20 °C to +55 °C –20 °C to +55 °C –40 °C to +55 °C –40 °C to +55 °C
Battery life 270 hours 270 hours 270 hours 160 hours 160 hours
Included accessories
Test lead set, alligator clips,
IR-to-USB cable √ √ √ √ √
Remote switch probe – √ – √ √
Bluetooth adapter (U1117A) – √ – √ √
Thermocoupler adapter
(J/K Type), bead (J-Type,
K-Type)
– – – – √
Batteries 4x AA alkaline 4x AA alkaline
2 x AAA lithium 44x AA alkaline 4x AA lithium
2 x AAA lithium 44x AA lithium
2 x AAA lithium 4
Warranty 3 years 3 years 3 years 3 years 3 years
1. Require Agilent Handheld Logger software for Windows PC and Agilent Insulation Tester Application for for iOS/Android.
2. User selectable display resolution in MENU default is 6,600 counts.
3. Automatically identify the signal component (AC or DC) of an electrical source.
4. The U1117A IR-to-Bluetooth adapter and 2x AAA batteries are not shipped as a standard accessory for certain countries. Please refer to www.agilent.com/find/U1117A for
more information.
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Agilent Technologies, Inc.
