M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
1
E-Series Surface Mount Mixer
2 – 500 MHz MAMX-007674-LCM1MH
V1 P
RoHS
Compliant
Features
• LO Power +13 dBm
• Up to +9 dBm RF
• Surface Mount
• Tape and reel packagi ng available
• 260°C Reflow Compatible
• RoHS* compliant versio n of the ELCM-1MH
Description
M/A-COM’s MAMX-007674-LCM1MH is a RoHS Com-
pliant Low Cost, Broadband, high performance Double
Balanced Mixer designed for use in high volume
wireless applications. The device has been optimised
by careful selection of the Schottky Diode and Balun
Transformer for excellent performance. MAMX-
007674-LCM1MH is available in an SM-89 surface
mount package and is designed to be utilized in both
standard reflow and high temperature soldering reflo w
profiles. Parts are packaged in tape & reel.
Ordering Information
Part Number Package
MAMX-007674-LCM1MH Tape and Reel (900 piece Reel)
SM - 89 Package
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
This PRELIMINARY Data Sheet contains in formati on regardin g a product M/A-COM has u nder developme nt. Performa nce is bas e d
on measured results a nd target specifications. Commitment to produce in volume is not guaranteed.
Pin Configuration
Pin No. Function
1 LO
2 Ground
3 Ground
4 RF
5 IF
6 Ground
Absolute Maximum Ratings 1
Parameter Absolute Maximum
RF Power 50 mW
Peak IF Current 40 mA
Operating Temperature -55°C to +85°C
Storage Temperature -55°C to +125°C
Pin Temperature (10 seconds) +260°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
2
E-Series Surface Mount Mixer
2 – 500 MHz MAMX-007674-LCM1MH
V1 P
RoHS
Compliant
Electrical Specifications: TA = 25°C, Z0 = 50 Ω 1, LO = +13 dBm
Parameter Test Conditions Frequency Units Min Typ Max
RF Frequency — 2 - 500 MHz — — —
LO Frequency — 2 - 500 MHz — — —
IF Frequency — DC - 500 MHz — — —
Conversion Loss — 2 - 250
250 - 500 dB
dB —
— 5.5
6.0 7.0
8.0
Isolation LO to RF 2 - 20
20 - 250
250 – 500
dB
dB
dB
45
30
25
55
44
30
—
—
—
Isolation LO to IF 2 - 20
20 - 250
250 – 500
dB
dB
dB
40
25
25
55
35
29
—
—
—
Input 1 dB Compression — 0.5 - 500 dBm — — 9
Typical Performance Curves
LO - RF Isolation Conversion Loss
LO - IF Isolation
-9
-8
-7
-6
-5
-4
0 100 200 300 400 500
Frequency (MHz)
dB
-70
-60
-50
-40
-30
-20
-10
0
0 100 200 300 400 500
Fre quency (MHz)
dB
-70
-60
-50
-40
-30
-20
-10
0
0 100 200 300 400 500
Fre quency (MHz )
dB
