EVERLIGHT ELETCRONICS CO., LTD
Technical Data Sheet
Photocoupler-RoHS Compliant
Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 7 Page: 1 of 12
Device No:DPC-817-001 Prepared date:08-01-2007 Prepared by:Che-Lun Yu
EL817 Series
Features:
• Current transfer ratio
(CTR:MIN.50% at IF =5mA ,VCE =5V)
• High isolation voltage between input
and output (Viso=5000 V rms )
• Compact dual-in-line package
EL817*:1-channel type
• Pb free
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approved (No. 608400)
• NEMKO approved (No. PO6206474/A1)
• DEMKO approved (No. 313924-01)
• FIMKO approved (No. FI 22807)
• CSA approved (No. 1143601)
• BSI approved (No. 8592, 8593)
• Options available:
- Leads with 0.4”(10.16mm) spacing (M Type)
- Leads bends for surface mounting (S and S1 Type)
- Tape and Reel of Type for SMD(Add”TA” Suffix)Ⅰ
- Tape and Reel of Type Ⅱfor SMD(Add”TB” Suffix)
- The tape is 16mm and is wound on a 33cm reel
• The product itself will remain within RoHS compliant version.
Description
The EL817 series contains a infrared emitting diode optically coupled to a phototransistor. It is
packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Applications
• Computer terminals
• System appliances, measuring instruments
• Registers, copiers, automatic vending machines
• Signal transmission between circuits of different potentials and impedances
Device Selection Guide Chip Material
Part. No. IR PT
EL817* GaAs Silicon
EL817
EL817S
EL817M