AMERICAN TECHNICAL CERAMICS GENERAL P U R P O S E C A PA C I T O R S Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications ISO 9001 Manufactured for ATC REGISTERED COMPANY ATC 001-847, Rev. L; 6/08 ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC Dimension Drawing Electrical Characteristics Capacitance Range: 0.5 pF to 0.12 F Temperature Coeffiecent of Capacitance: 0 30ppm/C W L Operating Temperature Range: -55C to +125C T (MAX.) Dissipation Factor: 0.1% (max.) @ + 25C, @1 MHz 1000 pF; @1 KHz >1000 pF MB Insulation Resistance: @ + 25C and rated Vdc: 100,000 megohms (min.) or 1000 ohm-farads (min.), whichever is less Dielectric Withstanding Voltage: 250% WVDC for WVDC < 200V 150% WVDC for 200V < WVDC 500V 120% WVDC for WVDC > 500V Applied for 5 1 sec. Aging: None Note: Unless otherwise specified all test data is at + 25C. NPO Temperature Coefficient of Capacitance Impedance (Ohms) % Capacitance Change NPO Impedance vs. Frequency Temperature C Frequency (MHz) Standard EIA Capacitance Values Reference Chart Cap. Code 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 Cap. pF 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 Cap. Code 8R2 100 120 150 180 220 270 330 390 470 560 680 Cap. pF 8.2 10 12 15 18 22 27 33 39 47 56 68 Cap. Code 820 101 121 151 181 221 271 331 391 471 561 681 Cap. pF 82 100 120 150 180 220 270 330 390 470 560 680 A M E R I C A N 1 ATC North America 631-622-4700 * sales@atceramics.com w w Cap. Code 821 102 122 152 182 222 272 332 392 472 562 682 Cap. pF 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 Note: Upper capacitance value limit for NPO is .12 F Cap. Code 822 Cap. Code 103 123 153 183 223 273 333 393 473 Cap. pF 8200 . Cap. F .010 .012 .015 .018 .022 .027 .033 .039 .047 Cap. Code 563 683 823 104 124 154 184 224 274 334 394 T E C H N I C A L Cap. F .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 Cap. Code 474 564 684 824 105 125 155 185 225 275 Cap. F .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 Cap. Code 335 395 475 565 685 825 106 126 156 C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m Cap. F 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC Selection Guide Case Size 0402 0504 0603 0805 1206 1210 1812 2225 Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .012 (.305) .015 (0.38) T Max. .024 (0.61) .044 (1.12) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03) .004 .014 .005 .015 .004 .015 .010 .030 .010 .030 .010 .030 .010 .030 .010 (.25) .030 (.76) Term. (MB) Min. Max. Min. Cap. (.10) (.36) (.12) (.38) (.10) (.38) (.25) (.76) (.25) (.76) (.25) (.76) (.25) (.76) 0R5 0R5 0R5 0R5 0R5 3R0 100 270 16V 331 182 152 103 223 273 393 124 25V 331 122 102 103 223 223 393 124 50V 331 102 102 103 123 223 333 124 100V 181 561 102 392 562 183 273 683 200V 101 391 561 Max. Cap. (code) & WVDC 10V 182 392 103 183 563 500V 821 182 472 103 273 1000V 471 102 222 472 153 391 821 182 392 2000V 5000V Dimensions in inches (mm) Higher voltages available upon request. Part Number Code 0603 NPO 1R 0 C T 2 A T Size Code Packaging: T=7" Reel, B=Tape Strip Temperature Characteristic Marking: A=No mark S=EIA Code - (Special Order) Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A 7 1 2 Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point WVDC 3 4 5 6 8 9 10 16 25 50 100* 200* 500* 1000* 2000* 5000* * Special Order - Consult Factory CAPACITANCE TOLERANCE B* C Code Tol. 0.1 0.25 pF (Values < 10 pF) F 1% G* 2 Termination Code J 5 T = Tin plated over Nickel Barrier (Standard), RoHS Compliant C = Palladium Silver, (non-magnetic), RoHS Compliant** W = Tin/Lead, Solder Plated over Nickel Barrier** **Consult ATC for availability % (Values > 10 pF) *Tighter tolerances available. A M E R I C A N ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m 2 AT C G E N E R A L P U R P O S E C A PA C I T O R S : X 7 R D I E L E C T R I C Dimension Drawing Electrical Characteristics Capacitance Range: 120 pF to 10 F Temperature Coefficent of Capacitance: 15% with 0 Vdc applied W L Operating Temperature Range: -55C to +125C T (MAX.) Dissipation Factor: 2.5% (max.) @ + 25C, @1 MHz 1000 pF; @1 KHz >1000 pF MB Insulation Resistance: @ + 25C and rated Vdc: 10,000 megohms (min.) or 500 ohm-farads (min.), whichever is less Dielectric Withstanding Voltage: 250% WVDC for WVDC < 200V 150% WVDC for 200V < WVDC 500V 120% WVDC for WVDC > 500V Applied for 5 1 sec. Aging: 3% (max.) per decade hr. Note: Unless otherwise specified all test data is at + 25C. X7R Temperature Coefficient of Capacitance 30 100 20 10 0 X7R 10 20 10 1 4.7 F 0.1 10 F 0.01 30 40 X7R Impedance vs. Frequency 1000 Impedance (Ohms) % Capacitance Change 40 60 40 10 90 0.001 130 1 100 10 Temperature C Standard EIA Capacitance Values Reference Chart Cap. Code 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 Cap. pF 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 Cap. Code 8R2 100 120 150 180 220 270 330 390 470 560 680 Cap. pF 8.2 10 12 15 18 22 27 33 39 47 56 68 Cap. Code 820 101 121 151 181 221 271 331 391 471 561 681 Cap. pF 82 100 120 150 180 220 270 330 390 470 560 680 A M E R I C A N 3 ATC North America 631-622-4700 * sales@atceramics.com w w 1000 10000 Cap. Code 821 102 122 152 182 222 272 332 392 472 562 682 Cap. pF 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 Note: Upper capacitance value limit for X7R is 10.0 F Cap. Code 822 Cap. Code 103 123 153 183 223 273 333 393 473 Cap. pF 8200 . Cap. F .010 .012 .015 .018 .022 .027 .033 .039 .047 Cap. Code 563 683 823 104 124 154 184 224 274 334 394 T E C H N I C A L Cap. F .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 Cap. Code 474 564 684 824 105 125 155 185 225 275 Cap. F .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 Cap. Code 335 395 475 565 685 825 106 126 156 C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w 100000 Frequency (KHz) . a t c e r a m i c s . c o m Cap. F 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 AT C G E N E R A L P U R P O S E C A PA C I T O R S : X 7 R D I E L E C T R I C Selection Guide Case Size 0402 0504 0603 0805 1206 1210 1812 2225 Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59) Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35) Tol. L & W .004 (0.10) .006 (.152) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .012 (.305) .015 (0.38) T Max. .024 (0.61) .044 (1.12) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03) Term. (MB) Min. Max. .004 (.10) .014 (.36) .005 (.12) .015 (.38) .004 (.10) .015 (.38) .010 (.25) .030 (.76) .010 (.25) .030 (.76) .010 (.25) .030 (.76) .010 (.25) .030 (.76) .010 (.25) .030 (.76) Min. Cap. 121 121 121 121 121 121 151 471 105 106 Max. Cap. (code) & WVDC 10V 16V 104 393 105 105 685 106 106 106 25V 273 333 154 105 475 106 106 106 50V 103 273 104 334 334 105 225 225 100V 472 153 104 104 154 105 225 225 200V 222 103 103 333 104 184 474 105 500V 123 223 563 104 334 1000V 272 682 153 273 104 102 222 472 153 2000V 5000V Dimensions in inches (mm) Higher voltages available upon request. Part Number Code 0805 X7R 10 2 K T 2 A T Size Code Packaging: T=7" Reel, B=Tape Strip Temperature Characteristic Marking: A=No mark S=EIA Code - (Special Order) Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A 7 1 2 Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point WVDC 3 4 5 6 8 9 10 16 25 50 100* 200* 500* 1000* 2000* 5000* *Special Order - Consult Factory CAPACITANCE TOLERANCE J* K Code 5 10 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant C = Palladium Silver, (non-magnetic), RoHS Compliant** W = Tin/Lead, Solder Plated over Nickel Barrier** **Consult ATC for availability *Tighter tolerances available. A M E R I C A N ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m 4 AT C G E N E R A L P U R P O S E C A PA C I T O R S : X 5 R D I E L E C T R I C Dimension Drawing Electrical Characteristics Capacitance Range: 0.1 F to 33 F Temperature Coefficent of Capacitance: 15% with 0 Vdc applied W L Operating Temperature Range: -55C to +85C T (MAX.) Dissipation Factor: 5% (max.) @ + 25C, @1 KHz @1.0 +/- 0.2 VRMS Insulation Resistance: @ + 25C and rated Vdc: 10,000 megohms (min.) or 500 ohm-farads (min.), whichever is less Dielectric Withstanding Voltage: 250% WVDC for WVDC < 200V 150% WVDC for 200V < WVDC 500V 120% WVDC for WVDC > 500V Applied for 5 1 sec. Aging: 3% (max.) per decade hr. MB Note: Unless otherwise specified all test data is at + 25C. X5R Temperature Coefficient of Capacitance X5R Impedance vs. Frequency 1000 30 100 Impedance (Ohms) % Capacitance Change 40 20 X5 R 10 0 -10 -20 10 1 4.7 F 0.1 10 F 0.01 -30 -40 -60 -10 40 90 0.001 130 1 100 10 Temperature C 1000 10000 100000 Frequency (KHz) Standard EIA Capacitance Values Reference Chart Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. pF Cap. Code Cap. F Cap. Code Cap. F Cap. Code Cap. F 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8R2 100 120 150 180 220 270 330 390 470 560 680 8.2 10 12 15 18 22 27 33 39 47 56 68 820 101 121 151 181 221 271 331 391 471 561 681 82 100 120 150 180 220 270 330 390 470 560 680 821 102 122 152 182 222 272 332 392 472 562 682 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 822 Cap. Code 103 123 153 183 223 273 333 393 473 8200 Cap. . F .010 .012 .015 .018 .022 .027 .033 .039 .047 563 683 823 104 124 154 184 224 274 334 394 474 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 564 684 824 105 125 155 185 225 275 335 395 475 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 565 685 825 106 126 156 186 226 276 336 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 A M E R I C A N 5 ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m AT C G E N E R A L P U R P O S E C A PA C I T O R S : X 5 R D I E L E C T R I C Selection Guide Case Size 0402 0603 0805 1206 1210 1812 Length (L) .040 (1.02) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) Width (W) .020 (0.51) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) Tol. L & W .004 (0.10) .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .012 (.305) T Max. .024 (0.61) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .004 (.10) .014 (.36) .004 (.10) .015 (.38) .010 (.25) .030 (.76) .010 (.25) .030 (.76) .010 (.25) .030 (.76) .010 (.25) .030 (.76) Term. (MB) Min. Max. 104 474 224 105 335 106 10V 105 225 106 106 226 336 16V 104 105 335 106 106 336 564 225 685 106 106 Min. Cap. Max. Cap. (code) & WVDC 25V 50V 224 Dimensions shown in inches (mm) Higher voltages available upon request. Part Number Code 0805 X5R 10 6 K T A A T Size Code Packaging: T=7" Reel, B=Tape Strip Temperature Characteristic Marking: A=No mark S=EIA Code - (Special Order) Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A 7 1 2 Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point WVDC 3 4 5 6 8 9 10 16 25 50 100* 200* 500* 1000* 2000* 5000* *Special Order - Consult Factory CAPACITANCE TOLERANCE K Code M 20 10 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** **Consult ATC for availability A M E R I C A N ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m 6 ATC GENERAL PURPOSE CAPACITORS: Z5U/Y5V DIELECTRIC Dimension Drawing Electrical Characteristics Capacitance Range: 0.1 F to 22 F Temperature Coefficent of Capacitance: Z5U: + 22%, -56% Y5V: + 22%, -82% Operating Temperature Range: Z5U: +10C to +85C Y5V: -30C to +85C Dissipation Factor: 3.5% (max.) @ + 25C, @1 KHz Insulation Resistance: @ + 25C and rated Vdc: 1000 megohms (min.) or 100 ohm-farads (min.), whichever is less Dielectric Withstanding Voltage: 250% of rated voltage for 5 1 seconds, 50 milliamps (max Aging: 3% (max.) per decade hr. W L T (MAX.) MB Note: Unless otherwise specified all test data is at + 25C. Z5U/Y5V Temperature Coefficient of Capacitance Impedance (Ohms) % Capacitance Change Z5U/Y5V Impedance vs. Frequency Temperature C Frequency (KHz) Standard EIA Capacitance Values Reference Chart Cap. Code 0R5 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 Cap. pF 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 Cap. Code 8R2 100 120 150 180 220 270 330 390 470 560 680 Cap. pF 8.2 10 12 15 18 22 27 33 39 47 56 68 Cap. Code 820 101 121 151 181 221 271 331 391 471 561 681 Cap. pF 82 100 120 150 180 220 270 330 390 470 560 680 A M E R I C A N 7 ATC North America 631-622-4700 * sales@atceramics.com w w Cap. Code 821 102 122 152 182 222 272 332 392 472 562 682 Cap. pF 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 Cap. Code 822 Cap. Code 103 123 153 183 223 273 333 393 473 Cap. pF 8200 . Cap. F .010 .012 .015 .018 .022 .027 .033 .039 .047 Cap. Code 563 683 823 104 124 154 184 224 274 334 394 T E C H N I C A L Cap. F .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 Cap. Code 474 564 684 824 105 125 155 185 225 275 335 Cap. F .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 Cap. Code 395 475 565 685 825 106 126 156 186 226 C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m Cap. F 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 AT C G E N E R A L P U R P O S E C A PA C I T O R S : Z5U/Y5V DIELECTRIC Selection Guide Case Size 0603 0805 1206 1210 1812 2225 Length (L) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59) Width (W) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35) Tol. L & W .005 (0.12) .008 (0.2) .008 (0.2) .008 (0.2) .012 (.305) .015 (0.38) T Max. .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03) Term. (MB) Min. Max. .004 .015 (.10) (.38) .010 .030 (.25) (.76) .010 .030 (.25) (.76) .010 .030 (.25) (.76) .010 .030 (.25) (.76) .010 .030 (.25) (.76) 222 103 123 123 473 823 16V 564 225 685 106 106 226 25V 334 105 335 106 565 226 50V 154 684 185 335 475 186 100V 563 224 474 105 185 475 200V 153 563 154 334 564 185 Min. Cap. Max. Cap. (code) & WVDC 10V Dimensions shown in inches (mm) Higher voltages available upon request Part Number Code 1206 Z5U 10 4 M T 2 A T Size Code Packaging: T=7" Reel, B=Tape Strip Temperature Characteristic Marking: A=No mark Capacitance Code: First 2 Significant Digits For Capacity. WVDC Code A 7 1 2 Indicates number of zeros following digits of capacitance in picofarads WVDC 3 4 10 16 25 50 100* 200* * Special Order - Consult Factory CAPACITANCE TOLERANCE Z M Code 20 +80 -20 Tol. Termination Code T = Tin plated over Nickel Barrier (Standard), RoHS Compliant W = Tin/Lead, Solder Plated over Nickel Barrier** **Consult ATC for availability A M E R I C A N ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m 8 AT C G E N E R A L P U R P O S E C A PA C I T O R S ATC Cross Reference Guide AVX ATC SERIES DESCRIPTION KEMET YAGEO TDK SAMSUNG ATC 0402 EIA 0402 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R 0402 LD02 C0402 R07 GRM15 0402 ECUV (Q) CC0402 CC0402 CL05 ATC 0603 EIA 0603 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 0603 LD03 C0603 R14 GRM18 0603 ECUV (V) CC0603 CC0603 CL10 ATC 0805 EIA 0805 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 0805 LD05 C0805 R15 GRM21 0805 ECUV (N) CC0805 CC0805 CL21 ATC 1206 EIA 1206 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1206 LD06 C1206 R18 GRM31 1206 ECUV (M) CC1206 CC1206 CL31 ATC 1210 EIA 1210 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1210 LD10 C1210 S41 GRM32 1210 - CC1210 CC1210 CL32 ATC 1812 EIA 1812 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 1812 LD12 C1812 S43 GRM43 1812 - CC1812 - CL43 ATC 2225 EIA 2225 SIZE, NICKEL BARRIER TERMINATIONS NPO, X7R, Z5U 2225 LD14 C2225 S48 - 2225 - - - CL57 (KYOCERA) JOHANSON MURATA NOVACAP PANASONIC Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1997 American Technical Ceramics. All Rights Reserved. A M E R I C A N 9 ATC North America 631-622-4700 * sales@atceramics.com w w ATC 001-847 Rev. L; 6/08 T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m AT C G E N E R A L P U R P O S E C A PA C I T O R S A M E R I C A N ATC North America 631-622-4700 * sales@atceramics.com w w T E C H N I C A L C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-8366-4318 * sales@atceramics-asia.com w . a t c e r a m i c s . c o m 10 Other ATC Product Catalogs Multilayer Capacitors & Power Assemblies Custom Thin Film Products Inductor Products High Power Resistive Products Single Layer Capacitors www.atceramics.com