ATC 001-847, Rev. L; 6/08
AMERICAN
TECHNICAL
CERAMICS
GENERAL
PURPOSE CAPACITORS
ISO 9001
REGISTERED
COMPANY
Low Cost Multilayer Ceramic Capacitors
For Surface Mount Applications
Manufactured for ATC
ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC
1
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
Electrical Characteristics
Capacitance Range: 0.5 pF to 0.12 µF
Temperature Coeffiecent
of Capacitance: 0 ± 30ppm/°C
Operating Temperature
Range: -55°C to +125°C
Dissipation Factor: 0.1% (max.) @ + 25°C, @1 MHz
≤1000 pF; @1 KHz >1000 pF
Insulation Resistance: @ + 25°C and rated Vdc:
100,000 megohms (min.) or
1000 ohm-farads (min.),
whichever is less
Dielectric Withstanding 250% WVDC for WVDC < 200V
Voltage: 150% WVDC for 200V < WVDC ≤ 500V
120% WVDC for WVDC > 500V
Applied for 5 ±1 sec.
Aging: None
Note: Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
LW
Dimension Drawing
Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
µF Cap.
Code Cap.
µF Cap.
Code Cap.
µF
0R5
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8R2
100
120
150
180
220
270
330
390
470
560
680
8.2
10
12
15
18
22
27
33
39
47
56
68
820
101
121
151
181
221
271
331
391
471
561
681
82
100
120
150
180
220
270
330
390
470
560
680
821
102
122
152
182
222
272
332
392
472
562
682
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
822
103
123
153
183
223
273
333
393
473
8200
.
.010
.012
.015
.018
.022
.027
.033
.039
.047
563
683
823
104
124
154
184
224
274
334
394
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
474
564
684
824
105
125
155
185
225
275
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
335
395
475
565
685
825
106
126
156
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
Standard EIA Capacitance Values Reference Chart
Cap.
Code Cap.
µF
NPO Temperature Coefficient of Capacitance
Temperature °C
Note: Upper capacitance value limit for NPO is .12 µF
% Capacitance Change
NPO Impedance vs. Frequency
Impedance (Ohms)
Frequency (MHz)
2
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
ATC GENERAL PURPOSE CAPACITORS: NPO (COG) DIELECTRIC
Case Size 0402 0504 0603 0805 1206 1210 1812 2225
Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59)
Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35)
Tol. L & W ±.004 (0.10)±.006 (.152)±.005 (0.12) ±.008 (0.2) ±.008 (0.2) ±.008 (0.2) ±.012 (.305) ±.015 (0.38)
T Max. .024 (0.61) .044 (1.12) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03)
Term. (MB) Min.
Max. .004 (.10)
.014 (.36) .005 (.12)
.015 (.38) .004 (.10)
.015 (.38) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76)
Min. Cap. 0R5 0R5 0R5 0R5 0R5 3R0 100 270
Max. Cap. (code)
& WVDC
10V
16V 331 182 152 103 223 273 393 124
25V 331 122 102 103 223 223 393 124
50V 331 102 102 103 123 223 333 124
100V 181 561 102 392 562 183 273 683
200V 101 391 561 182 392 103 183 563
500V 821 182 472 103 273
1000V 471 102 222 472 153
2000V 391 821 182 392
5000V
Dimensions in inches (mm)
Higher voltages available upon request.
Part Number Code
0603 NPO 1R 0 C T 2 A T
Size Code Packaging: T=7” Reel,
B=Tape Strip
Temperature Characteristic
Marking: A=No mark
Capacitance Code: First 2 Significant Digits For Capacity. S=EIA Code - (Special Order)
Indicates number of zeros following digits of
capacitance in picofarads R=Decimal Point
*Special Order - Consult Factory
CAPACITANCE TOLERANCE
Code B* CG* J
Tol. ±0.1 ±0.25
F
±1% ±2 ±5
pF (Values < 10 pF) % (Values > 10 pF)
*Tighter tolerances available.
Termination Code
T = Tin plated over Nickel Barrier (Standard), RoHS Compliant
C = Palladium Silver, (non-magnetic), RoHS Compliant**
W = Tin/Lead, Solder Plated over Nickel Barrier**
**Consult ATC for availability
WVDC Code A 7 1 2 3 4 5 6 8 9
WVDC
10 16 25 50 100* 200* 500* 1000* 2000* 5000*
Selection Guide
3
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC
Electrical Characteristics
Capacitance Range: 120 pF to 10 µF
Temperature Coefficent
of Capacitance: ± 15% with 0 Vdc applied
Operating Temperature
Range: -55°C to +125°C
Dissipation Factor: 2.5% (max.) @ + 25°C, @1 MHz
≤1000 pF; @1 KHz >1000 pF
Insulation Resistance: @ + 25°C and rated Vdc:
10,000 megohms (min.) or
500 ohm-farads (min.),
whichever is less
Dielectric Withstanding 250% WVDC for WVDC < 200V
Voltage: 150% WVDC for 200V < WVDC ≤ 500V
120% WVDC for WVDC > 500V
Applied for 5 ±1 sec.
Aging: 3% (max.) per decade hr.
Note: Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
LW
40
30
20
10
0
10
20
30
40
60 10 90 130
40
X7R
X7R Temperature Coefficient of Capacitance
Temperature °C
% Capacitance Change
Dimension Drawing
Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
µF Cap.
Code Cap.
µF Cap.
Code Cap.
µF
0R5
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8R2
100
120
150
180
220
270
330
390
470
560
680
8.2
10
12
15
18
22
27
33
39
47
56
68
820
101
121
151
181
221
271
331
391
471
561
681
82
100
120
150
180
220
270
330
390
470
560
680
821
102
122
152
182
222
272
332
392
472
562
682
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
822
103
123
153
183
223
273
333
393
473
8200
.
.010
.012
.015
.018
.022
.027
.033
.039
.047
563
683
823
104
124
154
184
224
274
334
394
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
474
564
684
824
105
125
155
185
225
275
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
335
395
475
565
685
825
106
126
156
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
Standard EIA Capacitance Values Reference Chart
Cap.
Code Cap.
µF
1000
100
10
1
0.1
0.01
0.001
110
100 1000 10000 100000
4.7 µF
10 µF
X7R Impedance vs. Frequency
Impedance (Ohms)
Frequency (KHz)
Note: Upper capacitance value limit for X7R is 10.0 µF
ATC GENERAL PURPOSE CAPACITORS: X7R DIELECTRIC
4
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
Dimensions in inches (mm)
Higher voltages available upon request.
Part Number Code
0805 X7R 10 2 K T 2 A T
Size Code Packaging: T=7” Reel,
B=Tape Strip
Temperature Characteristic
Marking: A=No mark
Capacitance Code: First 2 Significant Digits For Capacity. S=EIA Code - (Special Order)
Indicates number of zeros following digits of
capacitance in picofarads R=Decimal Point
*Special Order - Consult Factory
WVDC Code A 7 1 2 3 4 5 6 8 9
WVDC
10 16 25 50 100* 200* 500* 1000* 2000* 5000*
Selection Guide
CAPACITANCE TOLERANCE
Code J* K
Tol. ±5 ±10
*Tighter tolerances available.
Case Size 0402 0504 0603 0805 1206 1210 1812 2225
Length (L) .040 (1.02) .050 (1.27) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59)
Width (W) .020 (0.51) .040 (1.02) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35)
Tol. L & W ±.004 (0.10)±.006 (.152)±.005 (0.12) ±.008 (0.2) ±.008 (0.2) ±.008 (0.2) ±.012 (.305) ±.015 (0.38)
T Max. .024 (0.61) .044 (1.12) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03)
Term. (MB) Min.
Max. .004 (.10)
.014 (.36) .005 (.12)
.015 (.38) .004 (.10)
.015 (.38) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76)
Min. Cap. 121 121 121 121 121 121 151 471
Max. Cap. (code)
& WVDC
10V 105 106
16V 104 393 105 105 685 106 106 106
25V 273 333 154 105 475 106 106 106
50V 103 273 104 334 334 105 225 225
100V 472 153 104 104 154 105 225 225
200V 222 103 103 333 104 184 474 105
500V 123 223 563 104 334
1000V 272 682 153 273 104
2000V 102 222 472 153
5000V
Termination Code
T = Tin plated over Nickel Barrier (Standard), RoHS Compliant
C = Palladium Silver, (non-magnetic), RoHS Compliant**
W = Tin/Lead, Solder Plated over Nickel Barrier**
**Consult ATC for availability
5
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
Electrical Characteristics
Capacitance Range: 0.1 µF to 33 µF
Temperature Coefficent
of Capacitance: ± 15% with 0 Vdc applied
Operating Temperature
Range: -55°C to +85°C
Dissipation Factor: 5% (max.) @ + 25°C, @1 KHz @1.0
+/- 0.2 VRMS
Insulation Resistance: @ + 25°C and rated Vdc:
10,000 megohms (min.) or
500 ohm-farads (min.),
whichever is less
Dielectric Withstanding 250% WVDC for WVDC < 200V
Voltage: 150% WVDC for 200V < WVDC ≤ 500V
120% WVDC for WVDC > 500V
Applied for 5 ±1 sec.
Aging: 3% (max.) per decade hr.
Note: Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
LW
1000
100
10
1
0.1
0.01
0.001
110
100 1000 10000 100000
4.7 µF
10 µF
X5R Impedance vs. Frequency
Dimension Drawing
Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
µF Cap.
Code Cap.
µF Cap.
Code Cap.
µF
0R5
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8R2
100
120
150
180
220
270
330
390
470
560
680
8.2
10
12
15
18
22
27
33
39
47
56
68
820
101
121
151
181
221
271
331
391
471
561
681
82
100
120
150
180
220
270
330
390
470
560
680
821
102
122
152
182
222
272
332
392
472
562
682
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
822
103
123
153
183
223
273
333
393
473
8200
.
.010
.012
.015
.018
.022
.027
.033
.039
.047
563
683
823
104
124
154
184
224
274
334
394
474
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
.47
564
684
824
105
125
155
185
225
275
335
395
475
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
565
685
825
106
126
156
186
226
276
336
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
Standard EIA Capacitance Values Reference Chart
Cap.
Code Cap.
µF
ATC GENERAL PURPOSE CAPACITORS: X5R DIELECTRIC
-40
-30
-20
-10
0
10
20
30
40
-
60
-
10 90 130
40
X
5
R
X5R Temperature Coefficient of Capacitance
Temperature °C
% Capacitance Change
Impedance (Ohms)
Frequency (KHz)
ATC GENERAL PURPOSE CAPACITORS: X5R DIELECTRIC
6
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
Case Size 0402 0603 0805 1206 1210 1812
Length (L) .040 (1.02) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57)
Width (W) .020 (0.51) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18)
Tol. L & W ±.004 (0.10)±.005 (0.12) ±.008 (0.2) ±.008 (0.2) ±.008 (0.2) ±.012 (.305)
T Max. .024 (0.61) .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70)
Term. (MB) Min.
Max. .004 (.10)
.014 (.36) .004 (.10)
.015 (.38) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76)
Min. Cap. 104 474 224 105 335 106
Max. Cap. (code)
& WVDC
10V 105 225 106 106 226 336
16V 104 105 335 106 106 336
25V 564 225 685 106 106
50V 224
Dimensions shown in inches (mm)
Higher voltages available upon request.
Part Number Code
0805 X5R 10 6 K T A A T
Size Code Packaging: T=7” Reel,
B=Tape Strip
Temperature Characteristic
Marking: A=No mark
Capacitance Code: First 2 Significant Digits For Capacity. S=EIA Code - (Special Order)
Indicates number of zeros following digits of
capacitance in picofarads R=Decimal Point
*Special Order - Consult Factory
Termination Code
T = Tin plated over Nickel Barrier (Standard),
RoHS Compliant
W = Tin/Lead, Solder Plated over Nickel Barrier**
**Consult ATC for availability
WVDC Code A 7 1 2 3 4 5 6 8 9
WVDC
10 16 25 50 100* 200* 500* 1000* 2000* 5000*
Selection Guide
CAPACITANCE TOLERANCE
Code KM
±20
Tol. ±10
ATC GENERAL PURPOSE CAPACITORS: Z5U/Y5V DIELECTRIC
7
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
Electrical Characteristics
Capacitance Range: 0.1 µF to 22 µF
Temperature Coefficent Z5U: + 22%, -56%
of Capacitance: Y5V: + 22%, -82%
Operating Temperature Z5U: +10°C to +85°C
Range: Y5V: -30°C to +85°C
Dissipation Factor: 3.5% (max.) @ + 25°C, @1 KHz
Insulation Resistance: @ + 25°C and rated Vdc:
1000 megohms (min.) or
100 ohm-farads (min.),
whichever is less
Dielectric Withstanding 250% of rated voltage for 5 ± 1
Voltage: seconds, 50 milliamps (max
Aging: 3% (max.) per decade hr.
Note: Unless otherwise specified all test data is at + 25°C.
T (MAX.)
MB
LW
Dimension Drawing
Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
pF Cap.
Code Cap.
µF Cap.
Code Cap.
µF Cap.
Code Cap.
µF
0R5
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8R2
100
120
150
180
220
270
330
390
470
560
680
8.2
10
12
15
18
22
27
33
39
47
56
68
820
101
121
151
181
221
271
331
391
471
561
681
82
100
120
150
180
220
270
330
390
470
560
680
821
102
122
152
182
222
272
332
392
472
562
682
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
822
103
123
153
183
223
273
333
393
473
8200
.
.010
.012
.015
.018
.022
.027
.033
.039
.047
563
683
823
104
124
154
184
224
274
334
394
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
474
564
684
824
105
125
155
185
225
275
335
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
395
475
565
685
825
106
126
156
186
226
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
Standard EIA Capacitance Values Reference Chart
Cap.
Code Cap.
µF
Z5U/Y5V Temperature Coefficient of Capacitance
Temperature °C
% Capacitance Change
Impedance (Ohms)
Frequency (KHz)
Z5U/Y5V Impedance vs. Frequency
8
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
ATC GENERAL PURPOSE CAPACITORS: Z5U/Y5V DIELECTRIC
Case Size 0603 0805 1206 1210 1812 2225
Length (L) .063 (1.60) .079 (2.00) .125 (3.18) .125 (3.18) .180 (4.57) .220 (5.59)
Width (W) .031 (0.80) .049 (1.25) .063 (1.60) .100 (2.54) .125 (3.18) .250 (6.35)
Tol. L & W ±.005 (0.12) ±.008 (0.2) ±.008 (0.2) ±.008 (0.2) ±.012 (.305) ±.015 (0.38)
T Max. .035 (0.89) .051 (1.30) .064 (1.63) .067 (1.70) .067 (1.70) .080 (2.03)
Term. (MB) Min.
Max. .004 (.10)
.015 (.38) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76) .010 (.25)
.030 (.76)
Min. Cap. 222 103 123 123 473 823
Max. Cap. (code)
& WVDC
10V
16V 564 225 685 106 106 226
25V 334 105 335 106 565 226
50V 154 684 185 335 475 186
100V 563 224 474 105 185 475
200V 153 563 154 334 564 185
Dimensions shown in inches (mm)
Higher voltages available upon request
Part Number Code
1206 Z5U 10 4 M T 2 A T
Size Code Packaging: T=7” Reel,
B=Tape Strip
Temperature Characteristic
Marking: A=No mark
Capacitance Code: First 2 Significant Digits For Capacity.
Indicates number of zeros following digits of
capacitance in picofarads
*Special Order - Consult Factory
CAPACITANCE TOLERANCE
Code MZ
Tol. ±20 +80 -20
WVDC Code A 7 1 2 3 4
WVDC 10 16 25 50 100* 200*
Selection Guide
Termination Code
T = Tin plated over Nickel Barrier (Standard), RoHS Compliant
W = Tin/Lead, Solder Plated over Nickel Barrier**
**Consult ATC for availability
9
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
ATC 0603
ATC SERIES DESCRIPTION AVX
(KYOCERA) KEMET JOHANSON MURATA NOVACAP PANASONIC YAGEO TDK SAMSUNG
ATC 0805 EIA 0805 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
0805
LD05 C0805 R15 GRM21 0805 ECUV (N) CC0805 CC0805 CL21
ATC 1206 EIA 1206 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
1206
LD06 C1206 R18 GRM31 1206 ECUV (M) CC1206 CC1206 CL31
ATC 1210 EIA 1210 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
1210
LD10 C1210 S41 GRM32 1210 – CC1210 CC1210 CL32
ATC 0402 EIA 0402 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R
0402
LD02 C0402 R07 GRM15 0402 ECUV (Q) CC0402 CC0402 CL05
EIA 0603 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
0603
LD03 C0603 R14 GRM18 0603 ECUV (V) CC0603 CC0603 CL10
ATC 1812 EIA 1812 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
1812
LD12 C1812 S43 GRM43 1812 – CC1812 – CL43
ATC 2225 EIA 2225 SIZE,
NICKEL BARRIER
TERMINATIONS NPO, X7R, Z5U
2225
LD14 C2225 S48 – 2225 – – – CL57
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. A 10/03).
Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link
for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third par-
ties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 1997 American Technical Ceramics. All Rights Reserved. ATC 001-847 Rev. L; 6/08
ATC Cross Reference Guide
ATC GENERAL PURPOSE CAPACITORS
10
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6800410 • sales@atceramics-europe.com +86-755-8366-4318 • sales@atceramics-asia.com
ATC GENERAL PURPOSE CAPACITORS
Custom Thin Film
Products
Single Layer
Capacitors
Multilayer Capacitors
& Power Assemblies
Inductor
Products
High Power
Resistive Products
Other ATC Product Catalogs
www.atceramics.com
