MXR9500MZ-B Prototyping Board MXR9500MZ-B GENERAL DESCRIPTION The MXR9500MZ-B provides a convenient and easy way to evaluate and prototype with the MXR9500MZ tri axes accelerometer. The accelerometer and passive components are SMT mounted on the board. Each pin of the MXR9500MZ SMT device is brought out to standard 0.10 inch on center connections on the sides of the prototyping board. Wires can either be soldered directly to the prototyping board or the DIP pins can be used with widely available breadboard kits. For complete performance specifications of the MXR9500MZ refer to the MXR9500MZ datasheet. PIN DESCRIPTION Pin P1-1 P1-2 P1-3 P1-4 P2-1 P2-2 P2-3 P2-4 Name VDD DI2 DI1 GND XOUT YOUT ZOUT GND Description Supply Voltage 2.7 to 3.6 V Power Down Pin Power Down Pin Ground X Channel Output Y Channel Output Z Channel Output Ground MXR9500MZ-B PCB CONNECTION DIMENSIONS SCHEMATIC OF THE MXR9500MZ-B MXR9500MZ-B MXR9500MZ-B Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MXR9500MZ-B Prototyping Board User's Guide MEMSIC, Inc. One Technology Drive, Suite 325, Andover, MA, 01810, USA Tel: +1 978 738 0900 Fax: +1 978 738 0196 www.memsic.com Page 1of 1 Rev A