SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1
DATA SHEET
Form 0773-150211
SNAP Digital Input Modules
Features
Four channels per module
4,000-volt transient isolation
Convenient pluggable wiring terminals
Channel-specific LEDs
UL and CE approved
Accepts 22 to 14 AWG wire
Factory Mutual approved (part numbers ending in FM)
Description
Opto 22 SNAP I/O digital input modules are
part of the SNAP PAC System. Optical
isolation on these modules provides 4,000
volts of transient (4000 V for 1 ms)
protection for sensitive control electronics
from industrial field signals. Digital input
modules can sense either AC or DC signals.
All SNAP digital modules have removable
top-mounted connectors to provide easy
access for field wiring, and all operate on 5
VDC control logic. Each digital module
features integral channel-specific LEDs for
convenient troubleshooting and
maintenance. Each module is factory
tested twice and is UL and CE approved. In
addition, part numbers ending in FM are
Factory Mutual approved.
SNAP input modules are used to sense the
on or off status for AC or DC voltages from
such sources as proximity switches, push
buttons, or auxiliary contacts. The SNAP-
IDC5G is ideal for detecting 48 VDC in
telecom applications. The SNAP-IDC5-HT
is designed for sensors that have a high
leakage current.
The SNAP-IDC5-SW and SNAP-IDC5-SW-
NC modules supply power to an external
dry contact switch and sense switch
closure (SNAP-IDC5-SW) or opening
(SNAP-IDC5-SW-NC).
SNAP-IAC5MA and SNAP-IDC5MA feature
manual-on/manual-off/automatic
switches, ideal for testing control
applications. The switches override input
from field devices, so you can determine whether a problem
lies in the application or in the device.
SNAP racks use a retention rail locking system that holds
modules securely to the rack. Normally, a hold-down screw is
not required. However, for applications that require additional
module security, each module has provisions for two 4-40 by
½-inch standard machine screws to hold the module in
position on the SNAP rack.
Part Numbers
Part Description
SNAP-IAC5 SNAP 4-channel 90–140 VAC input, 5 VDC logic
SNAP-IAC5A SNAP 4-channel 180–280 VAC input, 5 VDC logic
SNAP-IAC5MA SNAP 4-channel isolated 90–140 VAC/VDC input, 5 VDC
logic, with manual/auto switches
SNAP-IAC5FM SNAP 4-channel 90–140 VAC/VDC input, 5 VDC logic, Fac-
tory Mutual approved
SNAP-IAC5AFM SNAP 4-channel 180–280 VAC input, 5 VDC logic, Factory
Mutual approved
SNAP-IDC5 SNAP 4-channel 10–32 VDC input, 5 VDC logic
SNAP-IDC5D SNAP 4-channel 2.5–28 VDC input, 5 VDC logic
SNAP-IDC5FAST SNAP 4-channel high-speed 2.5–16 VDC input, 5 VDC logic
SNAP-IDC5-FAST-A SNAP 4-channel high-speed 18–32 VDC input, 5 VDC logic
SNAP-IDC5G SNAP 4-channel 35–75 VAC/DC input, 5 VDC logic
SNAP-IDC5AF SNAP 4-channel high-speed 75–140 VDC input, 5 VDC logic
SNAP-IDC5GF SNAP 4-channel high-speed 35–75 VDC input, 5 VDC logic
SNAP-IDC5-HT SNAP 4-channel 15–32 VDC leakage-tolerant input, 5 VDC
logic
SNAP-IDC5MA SNAP 4-channel isolated high-speed 10–32 VAC/VDC input,
5 VDC logic, with manual/auto switches
SNAP-IDC5-SW SNAP 4-channel switch status input, normally open
SNAP-IDC5-SW-NC SNAP 4-channel switch status input, normally closed
SNAP-IDC5FM SNAP 4-channel 10–32 VDC input, 5 VDC logic, Factory
Mutual approved
SNAP-IDC5DFM SNAP 4-channel 2.5–28 VDC input, 5 VDC logic
SNAP-RETN4 SNAP 4-module retention rail (OEM)
SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM)
SNAP-RETN6 SNAP 6-module retention rail (OEM)
SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM)
SNAP-FUSE4AB SNAP 4-amp fuse, 25-pac
SNAP Digital Input Modules
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
2
DATA SHEET
Form 0773-150211
SNAP digital input modules are compatible with all SNAP PAC
brains and rack-mounted controllers, including
Wired+Wireless.
Notes for legacy hardware: These modules can also be used
with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains,
and with other SNAP brains such as the serial B3000 and the
B3000HA. They also mount on B-series, M-series, and D-series
racks.
Wiring Options
For easier, faster wiring of field devices to input modules, see
the SNAP TEX Cables and Breakout Boards Data Sheet, form
#1756. Each SNAP TEX cable snaps into the top of the module
and terminates at the breakout board with 18-gauge, color-
coded flying leads, already stripped and ready for wiring.
Breakout boards offer optional fusing, fuse-blown indicators,
and bussed power to loads.
Specifications: AC Input Modules
SNAP-IAC5 SNAP-IAC5A SNAP-IAC5MA
Key Feature -- -- Diagnostic switches
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 120 VAC/VDC 240 VAC/VDC 120 VAC/VDC
Channel-to-channel isolation 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient)
Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 90–140 VAC/VDC
Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 90 VAC/VDC
Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 35 VAC/VDC
Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 169 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per Mod-
ule 444
Turn-on Time 30 msec 30 msec 30 msec
Turn-off Time 30 msec 30 msec 30 msec
Optical Isolation, Field to Logic 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage -20 °C to 70 °C, operating
-40 °C to 85 °C, storage -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, CSA, RoHS,
DFARS UL, CE, CSA, RoHS,
DFARS UL, CE, RoHS, DFARS
Warranty Lifetime Lifetime 30 months
* When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules DATA SHEET
Form 0773-150211
PAGE
3
Specifications: DC Input Modules
See page 7 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.
SNAP-IDC5 SNAP-IDC5D SNAP-IDC5G SNAP-IDC5-HT
Key Feature -- -- -- Leakage-tolerant
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down
screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 24 VAC/VDC 5 VDC 48 VAC/VDC 24 VAC/VDC
Channel-to-channel isola-
tion 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient)
Input Voltage Range 10–32 VAC/VDC 2.5–28 VDC 35–75 VAC/VDC 15–32 VAC/VDC
Turn-on Voltage 10 VAC/VDC 2.5 VDC 35 VAC/VDC 15 VAC/VDC
Turn-off Voltage 3 VAC/VDC 1 VDC 7 VAC/VDC 8 VAC/VDC
Input Resistance 15 K ohms (nominal) 3 K ohms (nominal) 64 K ohms (nominal) 3 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic Out-
put Drive TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per
Module 4444
Tur n-on Time 5 msec 1 msec 5 msec 20 msec
Turn-off Time 15 msec 1 msec 15 msec 25 msec
Optical Isolation
(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage
Agency Approvals UL, CE, CSA, RoHS,
DFARS UL, CE, CSA, RoHS,
DFARS UL, CE, RoHS, DFARS CE, RoHS, DFARS
Warranty Lifetime Lifetime Lifetime Lifetime
* At 20kHz, 5Vp-p square wave input, 50% duty cycle.
** At 20kHz, 28Vp-p square wave input, 50% duty cycle.
*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
4
DATA SHEET
Form 0773-150211
Specifications: DC Input Modules (continued)
See page 7 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.
SNAP-IDC5GF SNAP-IDC5AF
Key Feature -- --
Wire size 22 to 14 AWG 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 48 VDC 120 VDC
Channel-to-channel
isolation 300 VAC (1,500 V transient) 300 VAC (1,500 V transient)
Input Voltage Range 35–75 VDC 75–140 VDC
Turn-on Voltage 35 VDC 75 VDC
Turn-off Voltage 20 VDC 35 VDC
Input Resistance 54 K ohms (nominal) 169 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage <0.5 V max. (on) @ 2 mA sinking
2.7 V min. (off) @ 0.4 mA sourcing <0.5 V max. (on) @ 2 mA sinking
2.7 V min. (off) @ 400 mA sourcing
Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per
Module 44
Turn-on Time 1 msec 1 msec
Turn-off Time 1 msec 1 msec
Optical Isolation
(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
* When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules DATA SHEET
Form 0773-150211
PAGE
5
Specifications: DC Input Modules (continued)
See
page 7
for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.)
SNAP-IDC5FAST* SNAP-IDC5-FAST-A** SNAP-IDC5MA
Key Feature High-speed High-speed Diagnostic switches
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 5 VDC 28 VDC 24 VAC/VDC
Channel-to-channel isola-
tion 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient)
Input Voltage Range 2.5–16 VDC 18–32 VDC 10–32 VAC/VDC
Turn-on Voltage 2.5 VDC 18 VDC 10 VAC/VDC
Turn-off Voltage 1 VDC 5 VDC 3 VAC/VDC
Input Resistance 440 ohms (nominal) 8 K ohms (nominal) 15 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<0.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL TTL 74 Series = 1 UL
TTL 74LS Series = 5 UL
Module Ratings
Number of Channels Per
Module 444
Turn-on Time 0.025 msec* 0.025 msec** 5 msec
Turn-off Time 0.025 msec* 0.025 msec** 15 msec
Optical Isolation
(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage -20 °C to 70 °C, operating
-40 °C to 85 °C, storage -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, FM, CSA, RoHS,
DFARS UL, CE, CSA, RoHS,
DFARS CE, RoHS, DFARS
Warranty Lifetime Lifetime 30 months
* At 20kHz, 5Vp-p square wave input, 50% duty cycle.
** At 20kHz, 28Vp-p square wave input, 50% duty cycle.
*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
6
DATA SHEET
Form 0773-150211
Specifications: AC and DC Input Modules (FM models)
SNAP-IAC5FM SNAP-IAC5AFM SNAP-IDC5FM SNAP-IDC5DFM
Key Feature Factory Mutual
approved Factory Mutual
approved Factory Mutual
approved Factory Mutual
approved
Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG
Torque, hold-down
screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)
Torque, connector
screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)
Field Side Ratings (each channel)
Nominal Input Voltage 120 VAC/VDC 240 VAC/ VDC 24 VAC/VDC 5 VDC
Channel-to-channel
isolation 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient) 300 VAC
(1,500 V transient)
Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 10–32 VAC/VDC 2.5–28 VDC
Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 10 VAC/VDC 2.5 VDC
Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 3 VAC/VDC 1 VDC
Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 15 K ohms (nominal) 3 K ohms (nominal)
Logic Side Ratings
Logic Output Voltage
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 400 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
<.5 V max. (on)
@ 2 mA sinking
2.7 V min. (off)
@ 0.4 mA sourcing
Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC
Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum
Negative True Logic
Output Drive TTL 74 Series=1 UL
TTL 74LS Series=5 UL TTL 74 Series=1 UL
TTL 74LS Series=5 UL TTL 74 Series=1 UL
TTL 74LS Series=5 UL TTL 74 Series=1 UL
TTL 74LS Series=5 UL
Module Ratings
Number of Channels
Per Module 4444
Turn-on Time 30 msec 30 msec 5 msec 1 msec
Turn-off Time 30 msec 30 msec 15 msec 1 msec
Optical Isolation
(Field Side to
Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)
Temperature -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage -20 to 70 °C, operating
-40 to 85 °C, storage
Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS
Warranty Lifetime Lifetime Lifetime Lifetime
*When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules DATA SHEET
Form 0773-150211
PAGE
7
SNAP-IDC5-SW and SNAP-IDC5-SW-NC Modules
Description
The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules provide
four channels of contact status input. Each module supplies 15
volts of power to an external dry contact switch. The SNAP-
IDC5-SW senses switch closure; the SNAP-IDC5-SW-NC senses
switch opening. Each user-supplied switch is connected with
two wires. Because these modules include power for the
switch, they are particularly cost-effective when labor costs for
wiring external power are high.
Typical switches for use with these modules are switched
status sensors (level sensors, pressure indicators, etc.),
magnetic reed switches (used on doors or windows for
burglar alarms), snap-action micro switches, the auxilliary
switches on motor starters, and most relay contacts.
CAUTION: The SNAP-IDC5-SW and SNAP-IDC5-SW-NC inputs
are not intended to be used with contacts that are connected
to any external user-supplied voltage or currents.
SNAP-IDC5-SW and SNAP-IDC5-SW-NC
Wiring Diagram
Specifications
Field Side Ratings (each channel)
Open Circuit Voltage
(Switch Open) 15 VDC typical
Short Circuit Current
(Switch Closed) 7 milliamps nominal
Minimum Off Resistance >20 K ohms
Maximum Allowable On
Resistance (Wire + Con-
tact Resistance) 500 ohms
Logic Side Ratings
Logic Output Voltage for
SNAP-IDC5-SW
(normally open)
<0.5 V max. (switch closed; LED on)
@ 2 mA sinking
2.7 V min. (switch open; LED off)
@ 0.4 mA sourcing
Logic Output Voltage for
SNAP-IDC5-SW-NC
(normally closed)
<0.5 V max.(switch closed; LED off)
@ 2 mA sinking
2.7 V min. (switch open; LED on)
@ 0.4 mA sourcing
Maximum Operating
Common Mode Voltage
(Field Term to Logic Con-
nector)
250 V
Power Requirements 5 VDC (±0.25) @ 200 mA
Module Ratings
Number of Channels Per
Module 4
Turn-on Time 5 msec
Turn-off Time 25 msec
Channel-to-channel Isola-
tion None
Input-to-output Isolation 1500 V AC/DC
Wire size 22 to 14 AWG
Torque, hold-down screws 4 in-lb (0.45 N-m)
Torque, connector screws 5.26 in-lb (0.6 N-m)
Temperature -20 °C to 70 °C, operating
-40 °C to 85 °C, storage
Agency Approvals UL, CE, RoHS, DFARS
FM (SNAP-IDC5SW only)
Warranty Lifetime
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
8
DATA SHEET
Form 0773-150211
Schematics
Most AC and DC Input Modules
See previous page for SNAP-IDC5-SW and SNAP-IDC5-SW-NC wiring diagram.
MA Modules with Manual/Auto Switches (Top View)
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules DATA SHEET
Form 0773-150211
PAGE
9
Dimensional Drawing
All Modules Except MA
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
10
DATA SHEET
Form 0773-150211
Dimensional Drawing
All MA Modules
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules DATA SHEET
Form 0773-150211
PAGE
11
Dimensional Drawing
All Models
IMPORTANT: The mounting rack connector has 24
pins; the module connector has 20 pins. The extra
pins on the mounting rack connector prevent
misalignment of the module during installation.
SNAP Digital Input Modules
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Input Modules
PAGE
12
DATA SHEET
Form 0773-150211
Dimensional Drawing
All Models
SNAP Digital Modu le Mounted on SN AP Rack
More About Opto 22
www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-131203
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Products
Opto 22 develops and manufactures reliable, flexible, easy-to-use
hardware and software products for industrial automation,
energy management, remote monitoring, and data acquisition
applications.
groov
groov
puts your system on your mobile device. With zero
programming, you can build mobile operator interfaces to
monitor and control systems from Allen-Bradley, Siemens,
Schneider Electric, Modicon, and many more. Web-based
groov
puts mobile-ready gadgets at your fingertips. Tag them from your
existing tag database, and they automatically scale for use on any
device with a modern web browser. See
groov.com
for more
information and your free trial.
SNAP PAC System
Designed to simplify the typically complex
process of selecting and applying an
automation system, the SNAP PAC
System consists of four integrated
components:
SNAP PAC controllers
PAC Project Software Suite
SNAP PAC brains
SNAP I/O
SNAP PAC Controllers
Programmable automation controllers
(PACs) are multifunctional, modular controllers based on open
standards.
Opto 22 has been manufacturing PACs for over two decades. The
standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-
series, and the software-based SoftPAC™ all handle a wide range
of digital, analog, and serial functions for data collection, remote
monitoring, process control, and discrete and hybrid
manufacturing.
SNAP PACs are based on open Ethernet and Internet Protocol (IP)
standards, so you can build or extend a system easily, without the
expense and limitations of proprietary networks and protocols.
Wired+Wireless™ models are also available.
PAC Project Software Suite
Opto 22’s PAC Project Software Suite provides full-featured, cost-
effective control programming, HMI (human machine interface)
development and runtime, OPC server, and database connectivity
software for your SNAP PAC System.
Control programming includes both easy-to-learn flowcharts and
optional scripting. Commands are in plain English; variables and I/
O point names are fully descriptive.
PAC Project Basic offers control and HMI tools and is free for
download on our website,
www.opto22.com
. PAC Project
Professional, available for separate purchase, adds one SoftPAC,
OptoOPCServer, OptoDataLink, options for controller redundancy
or segmented networking, and support for legacy Opto 22 serial
mistic
I/O units.
SNAP PAC Brains
While SNAP PAC controllers provide central control and data
distribution, SNAP PAC brains provide distributed intelligence for
I/O processing and communications. Brains offer analog, digital,
and serial functions, including thermocouple linearization; PID
loop control; and optional high-speed digital counting (up to 20
kHz), quadrature counting, TPO, and pulse generation and
measurement.
SNAP I/O
I/O provides the local connection to sensors and equipment.
Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module,
depending on the type of module and your
needs. Analog, digital, and serial modules are
all mixed on the same mounting rack and
controlled by the same processor (SNAP PAC
brain or rack-mounted controller).
Quality
Founded in 1974, Opto 22 has established a
worldwide reputation for high-quality products.
All are made in the U.S.A. at our manufacturing
facility in Temecula, California. Because we
test each product twice before it leaves our
factory, rather than only testing a sample
of each batch, we can guarantee most
solid-state relays and optically isolated I/O
modules for life.
Free Product Support
Opto 22’s California-based Product Support Group offers free,
comprehensive technical support for Opto 22 products. Our staff
of support engineers represents decades of training and
experience. Support is available in English and Spanish by phone
or email, Monday–Friday, 7 a.m. to 5 p.m. PST.
Additional support is always available on our website: how-to
videos, OptoKnowledgeBase, self-training guide, troubleshooting
and users guides, and OptoForums.
In addition, hands-on training is available for free at our Temecula,
California headquarters, and you can
register online
.
Purchasing Opto 22 Products
Opto 22 products are sold directly and through a worldwide
network of distributors, partners, and system integrators. For
more information, contact Opto 22 headquarters at 800-321-
6786 or 951-695-3000, or visit our website at
www.opto22.com
.
www.opto22.com